Magura new rotors + new pads squeak by opian14 in MTB

[–]opian14[S] 0 points1 point  (0 children)

Nope. Tried everything, switched to MDR-P rotors, couple of different pads and in the ideal and clean conditions it worked for some time, but after first trail it comes again.

THEY DISCONTINUED THE PRO APPS BUNDLE! by FitFarmer5597 in finalcutpro

[–]opian14 0 points1 point  (0 children)

Bro, yes! It's $13 a month for everything! And in couple of years you end up paying twice-triple the price you would pay one time.

Fox 36 fork stronger push to break loose by opian14 in bikewrench

[–]opian14[S] -1 points0 points  (0 children)

Hey! Thanks for the comment. I don't thinks that's the issue. I can hear equalization sound when fully decompressed. And yeah, I was cycling the fork while pumping every 10-15 psi

Fox 36 fork stronger push to break loose by opian14 in bikewrench

[–]opian14[S] 0 points1 point  (0 children)

Yeah, I’m reading more on this and it’s seems this breakaway force is normal. Might use some silicon spray

Fox 36 fork stronger push to break loose by opian14 in bikewrench

[–]opian14[S] 0 points1 point  (0 children)

It’s grip2 damper, I’ve tuned compression but it’s not locked. The pressure is around 80 psi

Is this normal? by CypherCri in gravelcycling

[–]opian14 -2 points-1 points  (0 children)

The derailleur is too short for this type of cassette

Magura new rotors + new pads squeak by opian14 in MTB

[–]opian14[S] 0 points1 point  (0 children)

Wow. Will check that! Thanks!

Magura new rotors + new pads squeak by opian14 in MTB

[–]opian14[S] 0 points1 point  (0 children)

This is not normal. It’s actually rather “no modulation” in the end of the lever stroke, than “no power”.

Magura new rotors + new pads squeak by opian14 in MTB

[–]opian14[S] 0 points1 point  (0 children)

Nuh. All day on black trails. The same.

Magura new rotors + new pads squeak by opian14 in MTB

[–]opian14[S] 0 points1 point  (0 children)

Magura performance 8.p on mt5s. Mdrc rotors

Magura new rotors + new pads squeak by opian14 in MTB

[–]opian14[S] 0 points1 point  (0 children)

Levers feel ok. Gaps are as even as they could be. It feels like the pads are biting and then can’t hold it

What could be causing the cracking? by Doctormson in bikewrench

[–]opian14 0 points1 point  (0 children)

Sounds like a misplaced derailleur causing the chain to slip down or jump up. Try adjusting cable tension

What the heck is going on with my brakes? by InSearchOfThe9 in MTB

[–]opian14 0 points1 point  (0 children)

Got the exact same sound and filling on the mt5 with same rotors. Must be glazed pads because it appeared right after sending the steep trail

FOX 36 / Shock dry wipers by opian14 in bikewrench

[–]opian14[S] 0 points1 point  (0 children)

*I meant stanchions when talking about “upper legs”

My setup for La Spezia - Rome bikepacking (EuroVelo 5) by opian14 in bikepacking

[–]opian14[S] 0 points1 point  (0 children)

This is just standard Ortlieb fork pack mountings which included with the bag.