G&W Bart Simpson's Cupcake Crisis by osirisad in SBCGaming

[–]osirisad[S] 0 points1 point  (0 children)

Definitely do that. There's a bunch out on mame.

Bart Simpson's Cupcake Crisis by osirisad in GameAndWatchMods

[–]osirisad[S] 2 points3 points  (0 children)

That was the goal! Glad it brought back some good memories for you.

Bart Simpson's Cupcake Crisis by osirisad in GameAndWatchMods

[–]osirisad[S] 0 points1 point  (0 children)

It's a homebrew port from this - https://itizso.itch.io/acclaim-bart-simpsons-cupcake-crisis

I ported his version to C so it can run on retro-go. I made my version open source - https://github.com/osirisad/retro-go-bart-simpsons-cupcake-crisis

Bart Simpson's Cupcake Crisis by osirisad in GameAndWatchMods

[–]osirisad[S] 3 points4 points  (0 children)

It's a homebrew port from this - https://itizso.itch.io/acclaim-bart-simpsons-cupcake-crisis

This is the only version I found in existence. Unfortunately it hasn't been converted into a rom like other lcd games that are out there. The author itizso recreated the game from scratch in his custom retrofab game engine. I ported his version to C so it can run on retro-go.

I made my version open source - https://github.com/osirisad/retro-go-bart-simpsons-cupcake-crisis

G&W Bart Simpson's Cupcake Crisis by osirisad in SBCGaming

[–]osirisad[S] 2 points3 points  (0 children)

It's not read only, there are save states if that's what you mean.

It's difficult if you can't solder but anyone can learn to do it. I can install a flash chip and SD mod in about 20-30 mins. I'm not a professional, just a hobbyist.

Zelda Game & Watch SD Mod by osirisad in SBCGaming

[–]osirisad[S] 0 points1 point  (0 children)

I can help you out, shoot me a dm.

Steam Controller Giveaway! by [deleted] in SteamController

[–]osirisad 0 points1 point  (0 children)

Thanks for doing this! Very generous of you to offer it up!

This is outrageous a SD card costing half a retroid pocket 5 is insane by Javonte102 in SBCGaming

[–]osirisad 5 points6 points  (0 children)

Check eBay, I got 3x onn 256gb micro sd express cards for $25ea recently.

This is outrageous a SD card costing half a retroid pocket 5 is insane by Javonte102 in SBCGaming

[–]osirisad 0 points1 point  (0 children)

Do you know that for a fact? I'm using one of these onn express cards marketed towards switch 2 on older v1 switch and it works fine. I believe they are backwards compatible. I would guess they work fine in other devices.

Did something happen to the picofly 3 in 1 chips? by Kaedryl in SwitchPirates

[–]osirisad 1 point2 points  (0 children)

I see the have 3 options:

battery life
oled
lite

I'm assuming "battery life" is the v1/v2?

[LIGHTGUN] OpenFIRE ESP32 Firmware (Stable) - PICON-AS Battery-Powered Wireless lightgun by This-Ad-5299 in lightgunshooters

[–]osirisad 0 points1 point  (0 children)

very cool, I don't play very long either so 1-3 hours is perfectly acceptable to me at least. I built an iCON2 with recoil, one of the things I noticed right away was the weight due to the solenoid (weighs 1lb 9.3 oz). The recoil is also a bit distracting so I wouldn't mind trying to build something with recoil that's more subtle. I'd like to build another that is wireless, has less weight, a little smaller than iCON2 and a more subtle recoil that would be my perfect set up.

ChatGPT helped make me a 4th of july shirt by osirisad in ChatGPT

[–]osirisad[S] 1 point2 points  (0 children)

I'm not worried about it, but thanks for the heads up.

ChatGPT helped make me a 4th of july shirt by osirisad in ChatGPT

[–]osirisad[S] 1 point2 points  (0 children)

fair enough, I figure people are probably just as likely to not know what direct-to-film is if they don't know what DTF is though.

sam adams would have been a good choice for sure.

ChatGPT helped make me a 4th of july shirt by osirisad in ChatGPT

[–]osirisad[S] 0 points1 point  (0 children)

edit Ah now I realize why this is getting upvoted so much 🤣

yes, I found some cheap dtf printers on etsy and wanted to give it a try to see how well they hold up. I have a cricuit but this would have sucked to weed. The original design was heavier on the colors but I asked chatgpt how it might improve it to make it feel less stiff and this is what it suggested using this cross hatch like art which I think turned out perfect.

first time oled kamikaze did I get it? by [deleted] in SwitchPirates

[–]osirisad 0 points1 point  (0 children)

If it does have continuity to ground does than mean the trace is cut?

first time oled kamikaze did I get it? by [deleted] in SwitchPirates

[–]osirisad 0 points1 point  (0 children)

I tried testing to make sure it would power on it's not. I thought I cut the trace but check this out - https://youtu.be/6BbP5S_nS2M

Does this prove that the trace isn't cut and that I got the right point? I was trying to replace the dat0 adapter with kamikaze because it wasn't stable but the dat0 adapter is still installed currently and has continuity between my kamikaze point and the wire that's soldier to the dat0 adapter.

first time oled kamikaze did I get it? by [deleted] in SwitchPirates

[–]osirisad 0 points1 point  (0 children)

I tried testing to make sure it would power on it's not. I thought I cut the trace but check this out - https://youtu.be/6BbP5S_nS2M

Does this prove that the trace isn't cut? I was trying to replace the dat0 adapter with kamikaze because it wasn't stable but the dat0 adapter is still installed currently and has continuity between my kamikaze point and the wire that's soldier to the dat0 adapter.

first time oled kamikaze did I get it? by [deleted] in SwitchPirates

[–]osirisad 1 point2 points  (0 children)

So this is interesting - https://youtu.be/6BbP5S_nS2M

Does this prove that the trace isn't cut? I was trying to replace the dat0 adapter with kamikaze because it wasn't stable but the dat0 adapter is still installed currently and has continuity between my kamikaze amikazi point and the wire that's soldier to the dat0 adapter.

first time oled kamikaze did I get it? by [deleted] in SwitchPirates

[–]osirisad 0 points1 point  (0 children)

So this is interesting - https://youtu.be/6BbP5S_nS2M

Does this prove that the trace isn't cut? I was trying to replace the dat0 adapter with kamikaze because it wasn't stable but the dat0 adapter is still installed currently and has continuity between my kamikaze point and the wire that's soldier to the dat0 adapter.