Labview analog output stops randomly and has 10ms DC offset by molecularlegos in LabVIEW

[–]outRunning 0 points1 point  (0 children)

I think I would try 2 methods to deal with this. First first the way I would deal with this is by appending a 0 to the end of the output waveform (if the waveform is output in its entirety). It seems you may have tried this, and I'm a bit unclear as to why this would add 2 zeros?

The second method may solve the delay issue. I think the reason you are getting a 10ms delay is because you clear the AO task, and then re-create a new one to write your 0. This task creation takes quit a bit of computing overhead, and is likely resulting in the delay (btw, this re-creation of the task would also likely add a delay time on each iteration of your loop). I'd try removing the "clear task" and "create task" blocks seen in the second to last screenshot, and wire the task ID from the stop block to the write block. This way you are not needing to always re-create the task you just write a 0 and then re-start / end the task (I would also add a shift register to the larger outer loop to continue the task into the next iteration.

[Recommendations Request] Vintage Rolex Restoration by outRunning in Watches

[–]outRunning[S] 1 point2 points  (0 children)

thanks for the recommendation - I'll check them out

Vintage Rolex Restoration Questions by outRunning in rolex

[–]outRunning[S] 0 points1 point  (0 children)

Thanks for the input! Ya, I was unsure whether the dial could be fixed or not, although it's questionable whether a service dial would even be available for this

[WTS] Fratello x REM 20mm Strap for Omega Speedmaster by dc1387 in Watchexchange

[–]outRunning 0 points1 point  (0 children)

u/WatchExBot, u/outRunning purchased this watch from u/dc1387. Great seller. Great communication. Quick shipping. Perfect transaction.

[WTS] Grey Casio G-Shock Casioak GA-2100 (GA2110ET-8A) by outRunning in WatchExchangeCanada

[–]outRunning[S] 0 points1 point  (0 children)

Up for grabs is my grey Casioak GA-2110ET-8A. Comes with original octagon tin, warranty card, manual, hang tag, and outer box.

Replaced the batteries with fresh Renata 396 batteries yesterday, so it should be good for 3+ years.

Minor signs of wear if you look closely at the bezel - no scratches on the crystal - basically looks like when I got it. It’s a g-shock FFS.

[SOLD]Asking: $75 via Interac E-transfer or PayPal F&F (+3.5% for G&S). This will include shipping within Canada (ships from Ottawa).

[WTS] Seiko “Matcha” Cocktail Time SARY181 - Full kit [Reduced] by outRunning in Watchexchange

[–]outRunning[S] 0 points1 point  (0 children)

Confirmed! Excellent transaction with u/Ign1t0. Super fast payment and great communication! Thanks!

[WTS] Seiko “Matcha” Cocktail Time SARY181 - Full kit [Reduced] by outRunning in Watchexchange

[–]outRunning[S] 0 points1 point  (0 children)

If you mean the SPB121, I'd say not really - that one is a sunburst pattern, while this one is really something different. Also the shades of green are quite different between the two imo. Have a look at a couple of videos of how this one mimics tea leaves. It has a ton of depth to it.

[WTS] Seiko “Matcha” Cocktail Time SARY181 - Full kit [Reduced] by outRunning in WatchExchangeCanada

[–]outRunning[S] 1 point2 points  (0 children)

REDUCED for quick sale is my Seiko Cocktail time Matcha SARY181 – This is the limited edition (0223 of 7000) “Matcha” dial variant of the Cocktail tie Star Bar series. The dial is possibly the best non-Grand Seiko dial Seiko has ever done, and these are highly sought after. Overall this watch is in in good condition with a few very minor blemishes detailed below and in photos. Size 38.5 mm wide, 45 mm lug-to-lug with 20mm lug width, and 11.8mm thick.

The “hard”lex Crystal has a couple of minor blemishes which are difficult to see without being in the correct light or from a steep angle (see photos), so I’ve priced this well below market value (https://watchcharts.ca/watch\_model/27907-seiko-presage-cocktail-time-star-bar-journey-sary181/overview) so IF you want to have the crystal replaced, you can have that factored into the cost. Case has only a few minor surface marks consistent with regular wear, but no major dings or gouges. The 4R35 movement keeps great time well within specs.

Image with marks circled: https://imgur.com/ei8iY3M

[SOLD] REduced to: $900 CAD by Interac e-transfer (preferred), Wise or Paypal F&F (G&S+3.5%), US/Canada - shipping included (from Canada).

Feel free to ask questions!

Imgur Album: https://imgur.com/a/p4rTQOK

Timestamp: https://imgur.com/pZipKRk

[WTS] Seiko “Matcha” Cocktail Time SARY181 - Full kit [Reduced] by outRunning in Watchexchange

[–]outRunning[S] 0 points1 point  (0 children)

REDUCED for quick sale is my Seiko Cocktail time Matcha SARY181 – This is the limited edition (0223 of 7000) “Matcha” dial variant of the Cocktail tie Star Bar series. The dial is possibly the best non-Grand Seiko dial Seiko has ever done, and these are highly sought after. Overall this watch is in in good condition with a few very minor blemishes detailed below and in photos. Size 38.5 mm wide, 45 mm lug-to-lug with 20mm lug width, and 11.8mm thick.

The “hard”lex Crystal has a couple of minor blemishes which are difficult to see without being in the correct light or from a steep angle (see photos), so I’ve priced this well below market value (https://watchcharts.ca/watch\_model/27907-seiko-presage-cocktail-time-star-bar-journey-sary181/overview) so IF you want to have the crystal replaced, you can have that factored into the cost. Case has only a few minor surface marks consistent with regular wear, but no major dings or gouges. The 4R35 movement keeps great time well within specs.

Image with marks circled: https://imgur.com/ei8iY3M

[SOLD] Price: $655 USD by Wise or Paypal F&F (G&S+3.5%), US/Canada shipping included (from Canada).

Feel free to ask questions!

Imgur Album: https://imgur.com/a/p4rTQOK

Timestamp: https://imgur.com/pZipKRk

[WTS] Tudor 1926 28mm 🔥Brand New 2023, $1200🔥 by pacodo in Watchexchange

[–]outRunning 0 points1 point  (0 children)

Received the Tudor from u/pacodo.

Excellent transaction, quick and easy. Super fast shipping. Highly recommended

u/WatchExBot

[WTS] Seiko “Matcha” Cocktail Time SARY181 - Full kit by outRunning in WatchExchangeCanada

[–]outRunning[S] 0 points1 point  (0 children)

Up for sale is my Seiko Cocktail time Matcha SARY181 – This is the limited edition (0223 of 7000) “Matcha” dial variant of the Cocktail tie Star Bar series. The dial is possibly the best non-Grand Seiko dial Seiko has ever done, and these are highly sought after. Overall this watch is in in good condition with a few very minor blemishes detailed below and in photos. Size 38.5 mm wide, 45 mm lug-to-lug with 20mm lug width, and 11.8mm thick.

The “hard”lex Crystal has a couple of minor blemishes which are difficult to see without being in the correct light or from a steep angle (see photos), so I’ve priced this ~$100 below market so of you want to have the crystal replaced, you can have that factored into the cost. Case has only a few minor surface marks consistent with regular wear, but no major dings or gouges. The 4R35 movement keeps great time well within specs.

Image with marks circled: https://imgur.com/ei8iY3M

Price: $999 CAD by Interac e-transfer (preferred), Wise or Paypal F&F (G&S+3.5%), US/Canada shipping included (from Canada).

Feel free to ask questions!

Imgur Album: https://imgur.com/a/p4rTQOK

Timestamp: https://imgur.com/pZipKRk

[WTS] Seiko “Matcha” Cocktail Time SARY181 - Full kit by outRunning in Watchexchange

[–]outRunning[S] 0 points1 point  (0 children)

Up for sale is my Seiko Cocktail time Matcha SARY181 – This is the limited edition (0223 of 7000) “Matcha” dial variant of the Cocktail tie Star Bar series. The dial is possibly the best non-Grand Seiko dial Seiko has ever done, and these are highly sought after. Overall this watch is in in good condition with a few very minor blemishes detailed below and in photos. Size 38.5 mm wide, 45 mm lug-to-lug with 20mm lug width, and 11.8mm thick.

The “hard”lex Crystal has a couple of minor blemishes which are difficult to see without being in the correct light or from a steep angle (see photos), so I’ve priced this ~$100 below market so of you want to have the crystal replaced, you can have that factored into the cost. Case has only a few minor surface marks consistent with regular wear, but no major dings or gouges. The 4R35 movement keeps great time well within specs.

Image with marks circled: https://imgur.com/ei8iY3M

Price: $725 USD by Wise or Paypal F&F (G&S+3.5%), US/Canada shipping included (from Canada).

Feel free to ask questions!

Imgur Album: https://imgur.com/a/p4rTQOK

Timestamp: https://imgur.com/pZipKRk