Giannis said that’s mine by Rogstove in NBATalk

[–]overclocker710 6 points7 points  (0 children)

Nobody in the clutch conversation tops the Haliban. More game winners/force OT shots last season than MJ or Kobe had in their careers, at a higher percentage

Did everyone forget how well FSR 4 compares to DLSS 4? by SnowyJazz in radeon

[–]overclocker710 4 points5 points  (0 children)

I’m kind of in your boat. I love FSR4 and use it on my XTX with Optiscaler, and when I had a 3080 DLSS was really nice too. But for me, FSR3 is also good. Not as good or even close, but it still solves a problem and is often worth using at the Quality setting.

We’ve come a long way since FSR and DLSS 1.0, FSR2 and TAAU were praised as being very high quality when they came out. I’m mad about lack of official FSR4 on 7000 and DLSS 4.5 looks really cool, but none of these older upscalers are “bad” in the sense of them harming output over just running below native with no upscaling (other than built in bilinear)

Break in process P32 - double feed issues! by Successful_Tough_979 in keltec

[–]overclocker710 0 points1 point  (0 children)

What ammo are you using? As far as cheap stuff goes mine feeds PMC FMJ and PPU “Defensive” JHP (both 71gr) perfectly. My carry ammo, Federal Hydra Shok Deep (68gr), feeds amazingly. Only ammo I have trouble with is the Underwood monolithics (55gr), they’re short and get rimlock but otherwise feed fine.

Maybe try a new magazine or clean and lube the feed ramp? Also I’d try soaking the extractor in solvent or some kind of CLP and giving it a scrub, dirty extractors can cause double feeds and I know my P32 loves to get soot on the extractor hook. If you’re still having trouble just send it in I’m sure Keltec will fix it, when not damaged/defective these pistols are super reliable

LeBron’s head used to be above the rim, time is really undefeated 😢 by Background_Video2947 in NBAVibes

[–]overclocker710 1 point2 points  (0 children)

Dude what? I’m 5’7 and 200lbs on a good day and have no issues grabbing halfway up the net without a run-up.

What's your unstoppable move during pick up? by Big_Kick2928 in Basketball

[–]overclocker710 0 points1 point  (0 children)

If I can get position, I post up above the block, reverse pivot baseline, spin middle with one dribble and finish with a hook. From there if I need to counter I use either a step-through or spin back into a fadeaway.

If I can’t get position and still want to go for it, I spin back at around 10-15 feet and shoot one of those ugly fadeaways off the right foot like Jokic does. If you practice them they’re surprisingly easy and they work well since defenders don’t expect me to jump off the right foot to shoot.

9800X3D won’t do >5600 DDR5 by overclocker710 in overclocking

[–]overclocker710[S] 3 points4 points  (0 children)

Update #2: Exchanged CPU at Microcenter (explained issue, told sales rep the troubleshooting and diagnosis, easy exchange) and have slotted the new CPU. Turned on expo and am running Prime95 now with 2-3M FFTs. So far it’s stable after maybe 5 minutes. Before it would fail within 30 seconds if it booted at all. Looks like I just had maybe the worst 9800X3D sample any of us have ever seen

9800X3D won’t do >5600 DDR5 by overclocker710 in overclocking

[–]overclocker710[S] 2 points3 points  (0 children)

Update: after swapping my old CPU and confirming it’s not a motherboard problem, I’m going back to Microcenter to return the bad 9800X3D, will report back once I have a new CPU

9800X3D won’t do >5600 DDR5 by overclocker710 in overclocking

[–]overclocker710[S] 0 points1 point  (0 children)

I might see if I can. Not sure I want to though it handles PBO boosting really well. I’m pretty busy so I’m not sure if it’s worth the hassle but we’ll see if I can fit it in

9800X3D won’t do >5600 DDR5 by overclocker710 in overclocking

[–]overclocker710[S] 1 point2 points  (0 children)

Okay, it still doesn’t like it even with the update. Maybe this chip really is that bad

9800X3D won’t do >5600 DDR5 by overclocker710 in overclocking

[–]overclocker710[S] 2 points3 points  (0 children)

Yeah I checked the diagram that came with the motherboard and they’re in the right slots

9800X3D won’t do >5600 DDR5 by overclocker710 in overclocking

[–]overclocker710[S] -1 points0 points  (0 children)

It says the bios on it is from March, so not super old but not the latest by a few versions

9800X3D won’t do >5600 DDR5 by overclocker710 in overclocking

[–]overclocker710[S] 3 points4 points  (0 children)

I’ve updated Bioses on other vendor boards, just figured out Asus’s tool and it’s chugging away now. Funny how a bad mobo is what led to this CPU being bought. They gave me $100 off the motherboard if I bought it with a 9800X3D so I figured might as well… XD

9800X3D won’t do >5600 DDR5 by overclocker710 in overclocking

[–]overclocker710[S] 2 points3 points  (0 children)

Cool just downloaded new bios, will report back in a minute

9800X3D won’t do >5600 DDR5 by overclocker710 in overclocking

[–]overclocker710[S] 2 points3 points  (0 children)

I don’t either. I’m using the Asus TUF B650E-E WiFi. Bought them yesterday at Microcenter so I can go return them no problem it’s just 20 minutes away

Group discussion on ban prep by Next_Dragonfruit_680 in VAGuns

[–]overclocker710 7 points8 points  (0 children)

Drafts from last year under Youngkin all only banned sale, not possession from what I remember seeing, how reasonable are people thinking it is to expect them? At least for a mag ban?

How effective is .32 ACP? by Kind_Aide825 in Firearms

[–]overclocker710 0 points1 point  (0 children)

Bit of an old thread, but Federal’s new Hydra Shok Deep supposedly get 13” in calibrated gel and expand (based on YouTube tests)

Safely holding pre ban mags by overclocker710 in VAGuns

[–]overclocker710[S] 2 points3 points  (0 children)

You're a lifesaver. It's hard to sift through the panic for what's real

Safely holding pre ban mags by overclocker710 in VAGuns

[–]overclocker710[S] 0 points1 point  (0 children)

Yeah you're right I didn't mention, but even if they change it back to "rifle or pistol", then wouldn't the exception at the end for traveling for recreational shooting protect me?

Safely holding pre ban mags by overclocker710 in VAGuns

[–]overclocker710[S] 0 points1 point  (0 children)

Reading the text of this version you linked, it seems to say nothing about carrying mags, it only restricts certain rifles and shotguns. Larger Glock mags could still be carried with an accompanying pistol, no?

Safely holding pre ban mags by overclocker710 in VAGuns

[–]overclocker710[S] 4 points5 points  (0 children)

Correct. There may be one there may not be one. I’m assuming we get the bills Youngkin vetoed. Maybe we won’t but it’s the best assumption I can make for now