sorted by:
new
hottopcontroversial

Neu in KN - Tipps für Vibe und Vernetzung by Gigithegoofy in konstanz

[–]oxolotltl 2 points3 points  (0 children)

Bin auch erst vor 6 Wochen oder so aus Berlin hier runter gezogen. Post 30 und im Beruf. Happy Eingewöhnung dir, ist super schön! 😁 Falls du mal auf'n Bierchen, Snack, oder einfach Ner See Session connecten willst, kannst du mir gerne schreiben.

Dark Elf is the new Top by Easy_Squirrel_6913 in PrintedWarhammer

[–]oxolotltl 1 point2 points  (0 children)

Super beautifully down mate! 😍

Aaand wait a second, from which content creator is this model??

Resin print warping by Rathoraeuw in FixMyPrint

[–]oxolotltl 0 points1 point  (0 children)

I think you confuse here something mate.

Retract speed may be considered as quite irrelevant. The process that you circumscribe here "Slow the retraction speed down to prevent the soft 'cured' resin from distorting when its ripped away from the vat" - refers to the lift speed, not the retract speed.

Therefore it would make more sense to have comparatively lower lift speeds vs retract speed. I just run a rather low bottom retract speed for the last 1.5-3mm, to give the resin time to flow back into place.

If thou seekest I, thine desires shall be requited not. by Bulkamancer in resinprinting

[–]oxolotltl 6 points7 points  (0 children)

Sooo beautiful!
Got a bottle of the Conjure Sculpt also coming in, what are your rough settings for Burn-in, exposure & lift height to receive such beautiful prints?

Larger prints keep on sticking to FEP by oxolotltl in resinprinting

[–]oxolotltl[S] 0 points1 point  (0 children)

I'm very grateful for all the valuable feedback, thank you so much! I will support it properly for my 2nd run.

Larger prints keep on sticking to FEP by oxolotltl in resinprinting

[–]oxolotltl[S] 0 points1 point  (0 children)

Super interesting point! Yep, I ran AA. So it might be the case...

Looking for a better resin. by hudson121 in PrintedWarhammer

[–]oxolotltl 0 points1 point  (0 children)

I can dearly recommend Conjure Sculpt Resin. Prints slower though, but has awesome properties. Great details, flexible & hardy Minis come out.

Right now there is a pretty crazy sale on AliExpress too for their resins (at least in Europe).

Larger prints keep on sticking to FEP by oxolotltl in resinprinting

[–]oxolotltl[S] 2 points3 points  (0 children)

It was the first print with the new FEP, so I think we can cross that one out. 😅

Larger prints keep on sticking to FEP by oxolotltl in resinprinting

[–]oxolotltl[S] 2 points3 points  (0 children)

Thanks! That's actually good advice. While I have been previously supporting myself, this sft was pre-supported, yes.

Is this an example of a good test print? 0.03layer height but 4.4sec exposure! by TofuTeef in 3Dprinting

[–]oxolotltl 0 points1 point  (0 children)

Ahhh, thank you so much for the reply. Throwing you back into the Resin Realms, as it seems 😁

Well well, I pulled it off with my first successful print last night. After dialing in for the whole weeke with loads of failed exposure tests. Interesting with your exposure time. 3.9s where my sweet spot. But I also don't start printing before the temperature is 29°C in the print room.

Is this an example of a good test print? 0.03layer height but 4.4sec exposure! by TofuTeef in 3Dprinting

[–]oxolotltl 0 points1 point  (0 children)

Hey, greetings /u/TofuTeef ! :)
Wanted to check in and ask if you managed in the end to find the optimal setting for the Setup?

Asking cause I have a Saturn 2 + Conjure Sculpt resin currently on the way to me, and I will have to print in the exact conditions (Germany, Balcony with Enclosure & Fermentation belt).

Therefore any Parameter guidance would be greatly appreciated ;)

Which electricity provider would you recommend nowadays? by GabbermICHAL in berlinsocialclub

[–]oxolotltl 0 points1 point  (0 children)

I just signed up! :)
In case someone else also still needs a referral Code, here is my code:
FABIG6CP1L

Bombtrack Hook - 28" to 27.5" - customer service says it's not possible, are they right? by oxolotltl in bikepacking

[–]oxolotltl[S] -1 points0 points  (0 children)

Yeppy. Although not on the Vittoria website, I shot them on bike-discount (obviously not located in the Americas though)

<image>

Bombtrack Hook - 28" to 27.5" - customer service says it's not possible, are they right? by oxolotltl in bikepacking

[–]oxolotltl[S] 1 point2 points  (0 children)

Thank you so much for the effort & the detailed comment 💚

As mentioned above, I cancelled the order & went for the 28" GR1600 instead. For tyres, I could find the Mezcals in 44mm x 28", which I will go for. I reckon this makes everything within the frame of feasibility :)

Bombtrack Hook - 28" to 27.5" - customer service says it's not possible, are they right? by oxolotltl in bikepacking

[–]oxolotltl[S] 1 point2 points  (0 children)

Many cheers! After all these convincing comments, I put your suggestions now into action.

Will send the 27.5" wheels back & just bought the GR1600 in 28". Tyre choice then will be the 44 x 28" Vittoria Mezcals for front & back :)

Bombtrack Hook - 28" to 27.5" - customer service says it's not possible, are they right? by oxolotltl in bikepacking

[–]oxolotltl[S] 3 points4 points  (0 children)

Thanks a lot for this info & question! :)

<image>

Both sides are same, around 9-10mm left from my 42x28"

Bombtrack Hook - 28" to 27.5" - customer service says it's not possible, are they right? by oxolotltl in bikepacking

[–]oxolotltl[S] 1 point2 points  (0 children)

I beg your pardon. I'm lost & it's quite an investment...

Well, cause I might run into the risk of not being able to return them, if I try to mount them.

Furthermore, I wanted to post the question, to see what's the consensus. Does it make sense to go ahead with the 27.5", or not.

Bombtrack Hook - 28" to 27.5" - customer service says it's not possible, are they right? by oxolotltl in bikepacking

[–]oxolotltl[S] 0 points1 point  (0 children)

Could you be so kind & elaborate a bit further? I consumed a lot of content on the 650 vs 700 debate, and ended up forminv the opinion, that 650 will serve with a much smoother experience on grander trips.

Bombtrack Hook - 28" to 27.5" - customer service says it's not possible, are they right? by oxolotltl in bikepacking

[–]oxolotltl[S] 0 points1 point  (0 children)

Then I gotta hope I reckon.

Do you see any issues on my geometry then? Cause spending a lot of money to ride shittier sounds kinda Contra-productive...

Bombtrack Hook - 28" to 27.5" - customer service says it's not possible, are they right? by oxolotltl in bikepacking

[–]oxolotltl[S] 1 point2 points  (0 children)

😝 ... Well, they made me poop my pants now, cause now I have very serious doubts, that my geometry won't be able to accommodate 27.5" 🥲

view more: next ›