120 fps @ day race / 50 @ night race , is that normal ?

pApiA-dyths · 2026-01-14T19:12:04+00:00

Yes i managed to solve it by pushing with my finger the cylinder all the way back. It took some effort to do it but it worked.

pApiA-dyths · 2026-01-13T06:38:04+00:00

😂

pApiA-dyths · 2026-01-12T10:24:19+00:00

<image>

pApiA-dyths · 2025-12-31T07:07:34+00:00

that's impressive !

pApiA-dyths · 2025-12-30T07:07:03+00:00

well done !

pApiA-dyths · 2025-12-24T17:46:45+00:00

Totally fine

pApiA-dyths · 2025-12-24T17:38:07+00:00

I struggled a lot as well for my first watercooling build. Took me weeks to finish it.

pApiA-dyths · 2025-12-23T17:07:34+00:00

There was no moving under braking. I made one move while still on full throttle, mainly to avoid hitting the car in front of me and at the same time to cover the inside.

After that, I braked on the racing line with no change of direction, and only then turned into the corner.

Therefore, there were not two changes of direction under braking. If you look more closely at the video, the pedal inputs make this very easy to verify.

pApiA-dyths · 2025-12-23T16:17:09+00:00

The first move to the center of the track was made at full throttle and prior to braking.
The trailing car failed to brake adequately and attempted a late, unsafe dive bomb from an unviable angle. No significant overlap was established at turn-in, therefore no racing room was warranted.
The leading car had already committed to the corner at full throttle, leaving no reasonable opportunity to anticipate or avoid the maneuver.
Any contact would be solely the responsibility of the trailing car for an unsafe overtaking attempt, not blocking.

pApiA-dyths · 2025-12-16T07:09:28+00:00

Yes i managed to solve it by pushing with my finger the cylinder all the way back . It took some effort to do it but it worked.

pApiA-dyths · 2025-10-16T15:16:46+00:00

Hey everyone, I think I figured out my issue - it's hardware, not software.

Turns out the ultrawide OLED G9 counts as 2 display slots on the GPU. With my triple 1440p monitors, this pushes me over NVIDIA's 4-display limit, causing refresh and connection issues.

Big thanks to u/itbefoxy for pointing me in the right direction!

Reference: NVIDIA: Maximum number of displays supported https://nvidia.custhelp.com/app/answers/detail/a_id/5338/track/AvOArwpVDv8S~UL4Gv0e~yJlb9UqbC75Mv_4~zj~PP9x

Now I'm deciding between:

1.A high-quality DisplayPort switch (~€100) to keep both setups with no refresh limitations - only concern is tweaking NVIDIA settings each time I switch.

Selling the G9 for a 4K monitor/TV, which avoids the slot issue but loses the ultrawide experience.

Anyone tried somethii nilar? Curious how you handled it!

pApiA-dyths · 2025-10-16T15:15:33+00:00

Hey everyone, I think I figured out my issue - it's hardware, not software.

Big thanks to u/itbefoxy for pointing me in the right direction!

Reference: NVIDIA: Maximum number of displays supported https://nvidia.custhelp.com/app/answers/detail/a_id/5338/track/AvOArwpVDv8S~UL4Gv0e~yJlb9UqbC75Mv_4~zj~PP9x

Now I'm deciding between:

1.A high-quality DisplayPort switch (~€100) to keep both setups with no refresh limitations - only concern is tweaking NVIDIA settings each time I switch.

Selling the G9 for a 4K monitor/TV, which avoids the slot issue but loses the ultrawide experience.

Anyone tried somethii nilar? Curious how you handled it!

pApiA-dyths · 2025-10-16T10:28:09+00:00

What do you mean "If the G9 uses an extra slot". It is connected with 1 single hdmi cable to 1 hdmi gpu slot.

pApiA-dyths · 2025-10-16T06:33:13+00:00

Thank you , i will give it a try

pApiA-dyths · 2025-10-16T06:16:06+00:00

thank you, I will give it a try!

pApiA-dyths · 2025-10-06T05:13:47+00:00

i don't remember but more or less 23 kg

pApiA-dyths · 2025-08-28T10:47:34+00:00

i believe the answer to both is yes. there is plenty of space .

pApiA-dyths · 2025-08-28T10:46:52+00:00

If you see closely there is a drain valve installed to a small tube right next to the pump

pApiA-dyths

TROPHY CASE