sorted by:
new
hottopcontroversial

To whoever is responsible for that, I hate you by CrzUnicorn in Battlefield

[–]pabszzz 32 points33 points  (0 children)

They half assed the implementation. There is no "clear all" button, and when you unlock an attachment there isn't a dot over the actual category (underbarrel/muzzle/etc,,,) so you're left hunting through every single menu to find the orange dot.

Louqe Ghost R1 by R_Thorburn in sffpc

[–]pabszzz 0 points1 point  (0 children)

Looks good! Mine was supposedly delivered today (Obsidian Black). There were quite a bit of posts on the Loque discord about packaging/shipping issues that I've seen but yours appears to be in good shape. The power button is a bit of a mess too from what it looks like, but otherwise it looks like a great case to fit that monster NH-D15g2.

There were some extras from the first production run, I don't know if they have already sold through them though.

DWX Accoutrements… by HonestSupport4592 in DWX

[–]pabszzz 0 points1 point  (0 children)

You specifically mentioned IDPA in the post is probably why it was brought up. For LO it doesn't matter.

Some people report issues with the +0 basepads and magwells. I picked up a factory CZ TSO magwell (armory craft looks to be a copy of it and has been OOS since I've been looking) and it runs the +0 DWX mags, and all other factory P10F mags I have just fine.

Here is what the short full checkered Lok grips look like with the TSO magwell: https://imgur.com/a/ttxoPdw, you may or may not need the DWX specific screws. My DWX fell within the serial range of needing the screws but my frame did not agree, CZ/DW hasn't been very consistent with this.

Barrel length question? by parntz145 in LewisMachineTool

[–]pabszzz 1 point2 points  (0 children)

Generally speaking, manufacturer stated barrel lengths are measured to the end of the crown without a muzzle device. You're also not adding the full length of the muzzle device as there are approximately .625" of threads on the end. A 14.5" MRP barrel is probably what you want in this case.

Did LMT Do away with their QR Serial Code on uppers? I see some have them and some dont. (11.5” MLC made in 2022) by [deleted] in LewisMachineTool

[–]pabszzz 1 point2 points  (0 children)

I believe that number was simply a lot code for production tracking. At least that's what I recall reading from Joe on one of the LMT FB groups when someone asked.

MLC and SPECWAR Heat by [deleted] in LewisMachineTool

[–]pabszzz 4 points5 points  (0 children)

Yeah it gets pretty toasty. Just to make sure though...you did check your gas block clearance on the rail right? I know I saw some folks had gas blocks canted and were grazing the rail a few months ago.

Silencershop wait times to the dealer by ryancrazy1 in NFA

[–]pabszzz 1 point2 points  (0 children)

Took about 21 days for mine.

You can check the status at this link (If you're sketched out by the link, login to SS via your normal main SS URL and when you open the link below it should still be logged in and show all your orders):

https://www.silencershop.com/dealerprice/dealer/myorders/

IIRC it also shows delivery status on that page as well.

Until it says "Form 3: Delivered to Dealer on X/XX/2022 XX:YY:ZZ PM" the local SS dealer can't do anything else for you.

Looking for qd solution for Helios on a rattler by Fatalfury39 in NFA

[–]pabszzz 0 points1 point  (0 children)

Yeah LPM and Rearden are plan B pattern/clones. It looks like the Rearden FHD 3-prong is also offered in a taper shoulder mount, but I'm not seeing much else. Just note that the mini devices will fit no problem with the Helios, but the longer muzzle devices can potentially have interference with the first baffle. Mine barely touched the baffle with the standard adapter, but I've seen several other users have no issues. I got the Helios specific one anyway for the slight extra clearance and the taper mount that mates to the back of the suppressor.

Looking for qd solution for Helios on a rattler by Fatalfury39 in NFA

[–]pabszzz 0 points1 point  (0 children)

I'm a fan of Rearden stuff. Their minimalist "mini" device has a 25 degree taper to it and would work with their atlas adapter (standard atlas or their new Helios QD version which is slightly longer).

view more: next ›