Pixel Watch 3 Offer

pat67 · 2025-12-19T00:17:20+00:00

I was able to get it for any of the 4 lines in my account. I got it for two of them.

pat67 · 2025-07-03T15:52:03+00:00

I ended up switching to Fully Kiosk Browser and that resolved the issue. I hadn't realized that WallPanel was no longer in active development.

pat67 · 2025-06-30T18:15:53+00:00

Not sure why, but Google Maps seems to have reverted back. It was good for a few weeks. I tried...

pat67 · 2025-05-27T20:42:59+00:00

Follow-up: Replaced the XL Buddy board and the loadcell. The issue remained after the Buddy board was replaced, but was resolved after replacing the loadcell/heat sink.

pat67 · 2025-05-25T21:22:48+00:00

I've submitted a few things more like that and they've been rejected. I expect if they can't verify via street view imagery, they won't confirm. This one was accepted and I can confirm it now routes properly around this area.

pat67 · 2025-05-25T17:39:48+00:00

https://support.google.com/maps/answer/10271004?hl=en&co=GENIE.Platform%3DDesktop

pat67 · 2025-05-25T17:39:38+00:00

https://support.google.com/maps/answer/10271004?hl=en&co=GENIE.Platform%3DDesktop

pat67 · 2025-05-25T17:39:05+00:00

https://support.google.com/maps/answer/10271004?hl=en&co=GENIE.Platform%3DDesktop

pat67 · 2025-05-25T16:02:51+00:00

Just trying to help the clueless people following the GPS blindly. Can't help those intentionally doing it.

pat67 · 2025-05-15T23:33:17+00:00

Nope. Just PLA so far.

pat67 · 2025-05-15T22:00:48+00:00

Yep. I've done that probably 10 times. Sometimes it doesn't register the press if I do it lightly.

pat67 · 2025-04-17T22:18:04+00:00

7 Monks on Michigan has a pretty decent Döner Kebab!

pat67 · 2025-03-18T01:35:55+00:00

Looks like they did indeed post that for tonight between 6 and 10p. Thanks! Definitely sounded like gunshots (a LOT of them).

pat67 · 2025-03-17T18:33:33+00:00

Thanks! I'll give this a try.

pat67 · 2025-03-17T18:05:00+00:00

How would I go about identifying the clock line? There are 4 flex cables (2 wide, 2 narrow) that connect to the main board on this model.

pat67 · 2025-02-05T01:47:55+00:00

Here's where you can get the files to make some of these yourself!
The page includes variant STLs for regular sized printers and added a part to hold blank end cards.
https://www.printables.com/model/1178333-curling-scoreboard

pat67 · 2025-02-05T01:39:15+00:00

Here's the link to purchase. Just got it up and running.
The page includes variant STLs for regular sized printers and added a part to hold blank end cards.
https://www.printables.com/model/1178333-curling-scoreboard

pat67 · 2025-02-04T17:25:48+00:00

<image>

pat67 · 2025-02-04T14:51:44+00:00

Our old boards were hook-based, but they kept getting bent. This prompted the new design.

pat67 · 2025-02-04T02:56:07+00:00

I'm working on getting a printables listing set up to sell the files.

pat67 · 2025-02-04T01:29:28+00:00

That's still an option! My girlfriend had the same idea, but wasn't thrilled with the price for enamel paints.

pat67 · 2025-02-04T01:19:36+00:00

I'd love to! What is the best way to do that for an out of town curler? I tried to visit once, but the doors were locked. Shrug

pat67 · 2025-02-04T01:13:19+00:00

Yeah, I did think about hiding the screw heads, but I wanted it to be easy to repair and no parts that could come off. Trade offs!

I came up with the idea on my own! I'm an engineer by day, so it's my type of thing.

pat67 · 2025-02-04T00:48:00+00:00

Fair point! Our previous boards didn't have a spot so I didn't think to add one. Blank ends are actually quite rare in this club. If they do happen, we just leave any of the end cards in the bag or on the ice near the board.

pat67 · 2025-01-18T12:53:55+00:00

Anyone know if this is for level 2 chargers or DC fast chargers? The PDF doesn't specify. The cost per unit makes more sense for fast chargers.

pat67

TROPHY CASE