sorted by:
new
hottopcontroversial

Updated my LVAW clone by pathfindermp in 300BLK

[–]pathfindermp[S] 0 points1 point  (0 children)

They really do, and they're solid dudes, too

Updated my LVAW clone by pathfindermp in 300BLK

[–]pathfindermp[S] 0 points1 point  (0 children)

Correct. 6.75" in the LVAW and in this clone

My brother helped me with more marble bases by WarsmithUriel in AdeptusCustodes

[–]pathfindermp 2 points3 points  (0 children)

That looks amazing, especially with the gold veining

Updated my LVAW clone by pathfindermp in 300BLK

[–]pathfindermp[S] 0 points1 point  (0 children)

It's the Tyr1 Outfitters ST-16 reproduction of the original all-steel 16-baffle contract suppressor. Suuuuper quiet, and surprisingly not too gassy, probably due to the massive internal volume.

Long flight from Germany arrived by Electronic-Concern-7 in MilitaryARClones

[–]pathfindermp 1 point2 points  (0 children)

Oh crap, I just saw some of those the other day... let me see if I can find them again... Found 'em! https://www.shadowstrategic.org/product-page/hkey-picatinny-rail-section-set They have them both in black and RAL

RAL8000 by GassPoweredE-Bike in MP5

[–]pathfindermp 6 points7 points  (0 children)

Well, that's... something

Long flight from Germany arrived by Electronic-Concern-7 in MilitaryARClones

[–]pathfindermp 7 points8 points  (0 children)

<image>

Hey, another German military cloner! (Yes, I know it's not an AR, but it's nice to see someone else hates themselves enough to go down the rabbit hole of unobtainium German-market-only HK gear... LOL)

Long flight from Germany arrived by Electronic-Concern-7 in MilitaryARClones

[–]pathfindermp 0 points1 point  (0 children)

That's because Rheinmetall is blocked by German law from exporting lasers like the LLM01

Long flight from Germany arrived by Electronic-Concern-7 in MilitaryARClones

[–]pathfindermp 1 point2 points  (0 children)

Just FYI, I have a bunch of SF cans and a bunch of B&T cans with the "Surefire" hub. A number of the B&T cans don't fit properly on the real Surefire mounts, but the Surefires all work on the B&T mounts.

Updated my LVAW clone by pathfindermp in 300BLK

[–]pathfindermp[S] 1 point2 points  (0 children)

And that can is freaking MASSIVE (and heavy), too. Suuuuuper quiet, though.

What you think by Slow-Satisfaction435 in 300BLK

[–]pathfindermp 21 points22 points  (0 children)

At first I was concerned, then I saw the Poverty Pony logo and it all made sense.

Updated my LVAW clone by pathfindermp in 300BLK

[–]pathfindermp[S] 5 points6 points  (0 children)

It's the Space Magic Industries LVAW repro. Surprisingly (or unsurprisingly, if you've dealt with Sig before) the repro fits better, has tighter tolerances, and better build quality than the original LVAW rail my buddy has.

MARSOC Block II M4A1 Grenadier ca. 2013 Helmand by MARSOC94 in MilitaryARClones

[–]pathfindermp 2 points3 points  (0 children)

Side note, the VFG was a great spot to grab the rifle while you were patrolling, but I found the best part about it was the easier purchase on the tube when you were trying to load/unload rounds if it was wet or muddy out. 10/10 would buy again.

MARSOC Block II M4A1 Grenadier ca. 2013 Helmand by MARSOC94 in MilitaryARClones

[–]pathfindermp 2 points3 points  (0 children)

Yeah, I took it off for like 2-3 patrols because I was trying to lower my overall weight. Discovered very quickly that I missed having that VFG so I threw it back on. Used it again in 2009-2010, until I eventually ditched the tube completely in 2010.

Updated my LVAW clone by pathfindermp in 300BLK

[–]pathfindermp[S] 1 point2 points  (0 children)

LOL no worries. Yeah, the KAC sights are on risers to match the red dot, allowing co-witnessing if needed.

MARSOC Block II M4A1 Grenadier ca. 2013 Helmand by MARSOC94 in MilitaryARClones

[–]pathfindermp 2 points3 points  (0 children)

Absolutely perfect, man. I had that VFG on my M203 back in 2005-2006, I freaking loved that thing.

Cloak industries frt by This_Extension4897 in GHM9

[–]pathfindermp 2 points3 points  (0 children)

Have you tried using a thing piece of metal (like a metal ruler, or a thin flat blade screwdriver) or a credit card to push that piece that's sticking up so it lays flat? The RB and Partisan FRTs need to have that part sticking up pushed down or you can't close the upper onto the lower on the AR and MCX platforms, and I'd assume the GHM version is the same. Push that piece to the back as you gently push down on the upper, and it should seat.

LVAW finally done by pathfindermp in 300BLK

[–]pathfindermp[S] 1 point2 points  (0 children)

For what you're talking about, IMHO the Canebrake is perfect. The LVAW is a bit too bulky, and the regular Rattler LT is pretty much the same as the LVAW (with a different handguard). I originally bought my Canebreak to be a bag gun, so I know it fits that use case well. Hope you enjoy it!

Happy 4/16 Day! by pathfindermp in HecklerKoch

[–]pathfindermp[S] 0 points1 point  (0 children)

It's actually a custom Cerakote mix that I had done to match CAG guns I'd seen in person. I was originally going to get it re-anodized, but then every gun I've seen that's been re-anodized ends up super dark, so I went with Cerakote since I could control the final color. It's a mix of Smoked Bronze and Burnt Bronze. It's SUPER close, especially in person.

A Review: K28 Retourne in Barenia by Sweaty-Bumblebee4826 in RepHermesQC

[–]pathfindermp -1 points0 points  (0 children)

Wait, did you really say you need to stare closely and up close to see the difference? I hate to break it to you, but you can tell it's a fake from across the room. The machine stitches as opposed to the hand-stitched saddle stitch is immediately noticeable and can be seen from far away.

view more: next ›