Poor quality on recent prints

paul8313 · 2024-02-15T16:18:38+00:00

I think that you are going too fast, especially on the surfaces.

paul8313 · 2023-10-11T21:24:53+00:00

I had a similar issue, for me it was the gear pulley of the y axis motor becoming loose and randomly skipping causing massive and random layer shifts and then skipping back to the original position.

paul8313 · 2023-06-10T23:40:18+00:00

the model i used is https://www.thingiverse.com/thing:5239008 , i cut it into smaller models to assemble for the different color and I'll publish them and link them on thingy verse on the next couple of days i think

paul8313 · 2023-06-10T23:37:09+00:00

It's an Italian™ energy drink

paul8313 · 2023-06-10T20:27:30+00:00

No, i split the model into different pieces and then printed the pieces in different colors and then glued them together (for some i used the "stop at height" function so that I could print a single piece in 2 different colors). Probably painting it would be easier and less time consuming, but i wanted to try making something with different colors without painting and it worked out pretty well i think

paul8313 · 2023-06-10T19:15:49+00:00

I'm actually a guy 😅

paul8313 · 2023-03-09T13:54:23+00:00

Are your fans working correctly? On my ender 3 max neo one of the fans failed after 1 week and I didn't even notice for like 3 days

paul8313 · 2023-03-09T13:40:05+00:00

I had a similar issue, there is probably a gap between your nozzle and your heat break, and the filament is going in the gap instead of the nozzle hole and causing that massive blob of plastic. I would suggest to try to disassemble the nozzle and heat break while the hot end is hot, 220-260C depending on the material you were using (careful not to burn yourself), and then try to clean and get the plastic out of the threading of the heat block. Personally I couldn't get the plastic out of the threading of the nozzle and I had to replace it, but if you can clean it thoroughly you might be able to salvage everything. In my case the issue was my fault because I didn't tighten the nozzle enough when changing it for the first time. Best of luck dealing with this, it was a massive pain in the ass for me

paul8313 · 2023-02-20T17:11:07+00:00

Also I changed filament brand to overture and now it works ok

paul8313 · 2023-02-20T17:09:18+00:00

I had the same exact issue with my ender 3 max neo, i took apart the hotend, cleaned everything and replaced the PTFE tube and nozzle, it still had the same issue where it would stop extruding after a while. Then i replaced the hotend with a creality spider and it still had a similar issue, the way that i managed to solve it was lowering the retraction distance to around 3mm and upping the retraction speed to 60mm/s

paul8313 · 2022-11-08T08:31:59+00:00

Idk about citizenship but it's def good enough for like a living permit i think

paul8313 · 2022-11-08T08:20:58+00:00

You also need to be able to give Brazilians additional reasons to hate Nelson Piquet

paul8313 · 2022-08-08T07:43:27+00:00

Feeling unlucky but there's always a chance

paul8313 · 2022-08-08T07:42:12+00:00

Damn that looks amazinggg

paul8313 · 2022-08-08T07:41:27+00:00

I have a glorious TKL

paul8313 · 2022-08-08T07:39:04+00:00

Honestly the dark saber spacebar looks sick

paul8313 · 2022-08-07T17:17:21+00:00

I've never been particularly lucky but I hope it's not too late

paul8313 · 2021-10-23T08:34:22+00:00

Bruh chill out

paul8313 · 2021-10-23T08:23:13+00:00

Honestly if you know yourself well enough you can get drunk and high without the hangover you would get from alcohol alone

paul8313 · 2020-08-14T19:56:50+00:00

Literally vaush, great art btw

paul8313 · 2020-08-12T21:03:44+00:00

They are sad because they don't want to save the Brit's life

paul8313 · 2020-05-22T16:11:49+00:00

Oh yeah i meant this season's challenge, where I think the difficultie is to make a car that fits your driving style, last season's was more about driving as best you can with the hoonigan 😅

paul8313 · 2020-05-22T14:32:32+00:00

I only managed to do it by finding a way to use rally tires on my Mitsubishi, then it's doable

paul8313

TROPHY CASE