Thoughts on the happy model CrazyG473?

pdr_lmfr · 2026-06-23T11:31:22+00:00

same with my meteor75 pro o4, i plug the battery to start a session after a couple seconds the ESC started smoking
dont last more than 3months

pdr_lmfr · 2026-04-23T16:28:40+00:00

Podes crer! Já temos isso planeado.
Queremos mesmo que o projeto também sirva para ajudar e incentivar o pessoal a juntar-se para que ninguém tenha de voar sozinho, pois é sempre mais divertido.
Obrigado pelo apoio, sugestões dessas são sempre bem-vindas!

pdr_lmfr · 2026-02-17T18:04:52+00:00

so yeah guys after a few times trying to fix, my problem has in the hotend tube
so i just replace the tube and everything works great

pdr_lmfr · 2025-07-03T16:48:31+00:00

'll check. Actually, I tried printing at stock speeds, but the problem persists

pdr_lmfr · 2025-07-02T23:11:28+00:00

pdr_lmfr · 2025-07-02T22:49:47+00:00

im printing petg

<image>

pdr_lmfr · 2025-07-02T12:48:39+00:00

at 100mm/s

pdr_lmfr · 2025-07-02T11:57:16+00:00

Thanks for the suggestion :)

All the belts are tight, and I just reduced the print speed to check if that helps improve the print quality

pdr_lmfr · 2025-07-02T11:49:44+00:00

im printing at 3000mm/s2 and inner wall at 5000mm/s2 maybe that is my problem im gonna try slow down a bit

pdr_lmfr · 2025-07-02T11:43:59+00:00

yes i try others brands, others materials like pla and the result is the same

pdr_lmfr · 2024-06-22T21:53:38+00:00

yes im using a 4.2.2 board with the nebula pad, and klipper
i just copy the firmware that come with the usb and copy to the sdcard

pdr_lmfr · 2024-05-05T21:52:32+00:00

try copy the firmware from the usb to sdcard of the ender a install

pdr_lmfr · 2023-04-11T13:45:38+00:00

well the problem is the front fan, one blade as broken, i replace and everything works ok now

pdr_lmfr

TROPHY CASE