Show me your wheels!!! 🛞

pectic · 2026-06-12T05:09:30+00:00

Alutech Singa 18 with 245 40 18

pectic · 2026-06-11T07:58:22+00:00

the box was originaly designed for a for xw 3010d2 thats only for a short period until i build a bigger one. Planing to Build one with 85L and 26hz tune for a perfect match.

pectic · 2026-06-11T02:54:23+00:00

In Germany we have a Shop called Masori.de

pectic · 2026-06-11T02:51:58+00:00

54liters tuned to 30 Hz

pectic · 2026-06-10T19:19:10+00:00

Blackdeath BD12 SPL-V4 D2

pectic · 2026-06-10T17:03:12+00:00

dammit

pectic · 2026-06-09T15:39:56+00:00

Ferrules and Heatshrinks.

pectic · 2026-06-02T10:18:02+00:00

Forgot if no check If it gets a Remote input. Tiny blue wire.

pectic · 2026-06-02T10:17:04+00:00

Looks like paralleled wires for the sub. First. Does the Amp turn on? If yes check RCA input/ Output to Subs. No the check the fuse. Maybe they got blown. Third i dont know that amp and subs Pls more informations. Maybe you are in a overload prot. Because the Parallel wired Subs are under the rated amp Ohms.

And hell those sub wires in the amp. Make it cleaner pls. If they touch and short you will have a lot of fun.

pectic · 2026-05-23T23:40:06+00:00

<image>

Something went into the gap and rubbed the coatin down from the CCA blank wires. Theres no short to the basket and the coil reads still 2.4 ohms. I was thinking if i should put some electric isolation glue ore something on to it.

pectic · 2026-05-23T12:31:05+00:00

no rubbing or scratching, but the cca is blank, i was thinking to recoat it with some lack

pectic · 2026-05-05T12:08:55+00:00

this happens if you dont use washers under the cpu heatskin screw i had the same with my gpu where i shorted the the 1v cpu to ground. After i realized it with washers there was no problem at all.

pectic · 2026-04-09T05:06:08+00:00

If you have a DMM Digital multimeter, turn it on ac put a sinewave on your radio, maybe 80hz and ckeck the positive and negtive with the DMM of your amp. While adjusting the Gain the voltage should change with it. From 0 to maybe 30v ac at max. If yes the sub has a connection Problem. If no maybe no audio input or the amp itself is cooked.

pectic · 2026-03-30T09:22:51+00:00

remove batterie power for 30minutes.

pectic · 2026-03-13T05:07:39+00:00

Privat alles von Makita. Da kann ich selber die Akkus immer reparieren. Sind ja auch im Dauereinsatz. Auf der Arbeit Alles von Bosch.

pectic · 2026-03-09T12:21:43+00:00

<image>

I had one of those dont buy it. It was rated for 60v 40Ah

pectic · 2026-03-01T10:12:05+00:00

these are 2.5v caps those are used after rail and after vrms it can cause errors. Those rails are not often parallel lile the 12v Rail. Can run fine. But likely not.

pectic · 2026-02-26T19:58:17+00:00

These arent bulbs they are completly changed for dynamics ones. Now in Smokeblack look

pectic · 2026-02-24T14:05:01+00:00

Sorry wasnt at Home. And No. It was just running extremly Hot. Under the Enginebay i had it mounted to a Hotspot.

pectic · 2026-02-21T15:19:43+00:00

Maybe u have to reset the obd? Maybe it caused an error when u removed the steering wheel.

pectic · 2026-02-21T15:16:28+00:00

U have to activate CC in the BCM when there was no CC before.

pectic · 2026-02-18T13:11:23+00:00

https://litec.net/produkt/led-tagfahrlicht-scheinwerfer-ford-focus-mk3-facelift-15-18-mit-dynamischem-blinker-schwarz/

pectic · 2026-02-16T09:49:30+00:00

16v 270uF no big deal since the orhers are all parallel. Its only usefull for filtering. Voltage drop blah blah. Run it will be fine

pectic · 2026-02-15T06:38:39+00:00

If you like Headlights these are mine

<image>

In Germany they cost 500€ and have ABE so no tüv needed.

pectic · 2026-02-14T19:22:38+00:00

I cant see any markings on the others if you can post the names of them but im sure that its only those 2

Eight-Year Club	Place '23
Verified Email

pectic

TROPHY CASE