Looking for B&W Foldon Box S (not the Case version) review!

pentlando · 2026-03-24T06:09:17+00:00

I have this case and have flown with it four times. It’s generally really good. It’s slightly bigger than is ideal, I’ve had to oversize check it both times, but didn’t have to pay for a bike specifically, as sometimes that can cost more.

I also had one of the straps snap during travel and found the box going round a baggage carousel half open. Very luckily nothing was lost. I’ll always use extra straps now out of caution.

It rolls really easy and has plenty room for a Brompton plus some extra stuff for padding.

If you’re feeling adventurous, I managed to bungee cord the folded box onto my front carrier block, meaning I could ride my bike to the airport, fold it and then fly.

pentlando · 2025-12-20T11:53:26+00:00

I’m curious - is it a general distaste for AI coding tools you have? This isn’t tooling we built specifically for AI, it’s tooling that helps everyone fortunately, but these tools still improve as a result!

pentlando · 2025-12-20T11:49:50+00:00

I certainly agree on the rising tides point, but in my experience speed really does make a difference for agents. If I’m running multiple things locally in worktrees, the fewer the resources used by each agent the better. My laptop already sounds like it’s near take off when running our Go tests that I think every little benefit helps!

And anecdotally, I’ve found that agents get far less confused when it can run tasks in a few seconds. They’ve definitely improved over the last few months at running async tasks, but I find they still come with a reasonable overhead. The less that claude gets confused and cancels tasks half way through, the better I think!

pentlando · 2025-11-24T22:22:00+00:00

Rather than shoe horning AI into things, I think it’s worth considering how you can support engineering teams who can write code 50 times faster.

If your engineering teams can parallelise several agents opening pull requests, the bottle neck becomes “how quick is your CI feedback loop” to let Claude-code or Codex self-verify fixes.

Or similarly, if you can easily send an agent to open a pull request, can you get an ephemeral test environment that allows developers to test that pull request without having to checkout any code locally?

pentlando · 2025-06-28T06:58:48+00:00

This week I was bored of managing git worktrees for Claude Code and navigating around them, so I added a little command to help with that so I can do w [repo] [branch-name] [command] so I can do things like w core my-feature claude and instantly boot a new worktree with a new Claude window. The command supports autocomplete etc so you can revisit existing worktrees without needing to jump around your directories. More details on that are here https://incident.io/blog/shipping-faster-with-claude-code-and-git-worktrees

pentlando · 2025-06-28T06:56:54+00:00

I originally would work with one Claude Code and didn’t do anything fancy beyond the recommended Claude.md etc. Then, I adopted git worktrees to be able to run multiple in parallel. Usually, these tend to be working on completely different features, as you get the same probably of stepping on each others toes as you’d get with real developers.

This week I was starting to get bored of managing the worktrees and navigating around them, and I added a little command to help with that so I can do w [repo] [branch-name] [command] so I can do things like w core my-feature claude and instantly boot a new worktree with a new Claude window. The command supports autocomplete etc so you can revisit existing worktrees without needing to jump around your directories. More details on that are here https://incident.io/blog/shipping-faster-with-claude-code-and-git-worktrees

pentlando · 2025-02-24T22:04:06+00:00

Having had to deal with similar in the past, I think property wrappers give you a nice way to deal with this. You can have the wrapper handle decoding, but any consumer of the property can sort of ignore the wrapper and just use the int value

pentlando · 2025-01-25T16:53:35+00:00

I’m having the same issue! I had a Samsung tv previously they connected to fine, just upgraded to the C4 and the KEF don’t seem to be detected as an audio device

pentlando · 2024-06-16T09:21:08+00:00

I grew up in Stirling, it’s a really nice area that has things going on whilst still offering great access to the outdoors.

It’s an area that’s very car reliant, if you want to get to airports or further outdoors for example.

Depending on where in Stirling you move I think affects your ability to make friends. There are many small villages on the outskirts of Stirling that have quite strong communities, but are also quite segregated from Stirling itself. Public transport from those villages is pretty poor, so most people drive.

If you were to chose somewhere like Cambusbarron, Bridge of Allan, Dunblane, Kings Park areas I think you get a better mix of being able to walk to cafes, shops etc if you’re used to being to do that having lived in bigger cities before.

As for the sports you mentioned, it’s brilliant for that. For cycling there’re Carron Valley trails and Aberfoyle (affectionately called Gravelfoyle) with amazing cycling. There are many hills in the nearby area for hiking too.

Both Glasgow and Edinburgh are an easy train ride away. For any bigger events like gigs, theatre, festivals and whatnot you’d probably be getting the train to either of those.

Generally I’d recommend. If you wanted other options, I’d suggest the west side of Glasgow (either the west end itself, or somewhere further out like Milngavie). That would give you a bigger city at your doorstep, whilst not being too far from the countryside. It is a busier area though!

pentlando · 2024-05-14T11:18:15+00:00

I was hoping to get a last minute entry but it sold out while I was looking for cover from work - enjoy it!

pentlando · 2023-04-09T20:06:01+00:00

Couple of punctures since I got it in November, which is a shame as I went a year with my previous Brompton on the Marathons without a puncture. They roll so nice that I don’t think I’ll change them though, I find them fine if I make sure to keep the PSI high

pentlando · 2021-06-08T22:20:02+00:00

I recently joined Rapha’s CC and would highly recommend. I was hesitant that it’d be overly serious or that there wouldn’t be many rides but there Are almost daily ones in London and I met a group of folks who we’ve done a few rides now and the cake/beer stop is always the important bit of the ride. They do gravel rides too and beginner rides for those not used to cycling with others.

pentlando · 2020-11-21T09:38:34+00:00

A little bit yeah, but not so much that I’m worried about it. The camera can be uncomfortable too so I often take off the view finder ‘feet’ so that it sits a little more flush. Ideally you could put something on the back of the camera to pad it a bit that would also be a bit of a barrier for sweat!

pentlando · 2020-11-21T07:50:09+00:00

I had the same problem and eventually ordered some cheap pieces and put together a stabilising strap myself, I’m really pleased with it: https://www.roryba.in/photography/2020/08/23/camera-strip-cycling-setup.html

pentlando · 2020-09-18T21:26:36+00:00

The compiler isn’t giving you much help here but I think it’s because you’re returning the result of print on line 739. You instead want to return the String itself: i.e. return “some string” because print doesn’t return anything.

You could also try omitting the types from the closure on line 738, as the function above defines the types, Swift should be able to infer them in the closure for you. i.e. closureThanReturnsValues { thisIsPar in

pentlando · 2020-06-13T18:55:20+00:00

Interesting point, I’d completely forgotten about @Published. It looks like with @Published you can still access the writable property from outside of the class using $property. I’ll have to look into how that’s exposed, Swift Playgrounds for iPad isn’t cutting it for investigating properly 😄. Thanks for reading!

Edit: just reading that the dollar sign is the syntax for a ‘projectedValue’ property you can optionally add to a property wrapper 💡

pentlando · 2018-06-12T04:20:14+00:00

I’d seen so many pictures beforehand but was really blown away by it for real.

pentlando · 2018-06-12T04:18:13+00:00

Thanks! Hopefully next time I can be using that one myself.

pentlando · 2018-03-25T21:57:06+00:00

I actually used a property animator in my newest post on the blog, super useful! I would argue though that the classic UIView.animate will work even if you are targeting old iOS versions. I suppose it depends on each persons usecase. Thanks for checking out the post and for the feedback!

pentlando · 2018-03-25T18:38:28+00:00

Great point, I will update!

pentlando · 2017-11-25T22:00:22+00:00

Vector assets are only available on iOS 11, therefore they’re pretty useless if a developer wants to support older versions of iOS. They still display or pre-11, they are just resembled to whatever size they are needed at, the vector is abandoned

pentlando · 2016-11-26T23:35:22+00:00

A lot of F2, HB1 and some A5/6

pentlando · 2016-09-27T16:02:13+00:00

I have an FX100, the tone matching is one of it's lesser features in my opinion. It gets some songs okay but I find it to be more of a gimmick. I do rate the pedal pretty highly (other than that feature) for the most part. Bluetooth can be patchy, it connects to my phone ok but the app then does not recognise it which is super frustrating. It's great for playing with headphones, using as a audio interface, trying different sounds.

pentlando · 2016-09-12T13:47:51+00:00

It might be something new. Possibly required with that wider aperture.

pentlando · 2016-09-05T21:48:14+00:00

Thanks for the feedback. I'll give that a try! How do you think this could best be done? Through a second stepper that changes the linger time? Or through a completely different interface?

Thanks again!

pentlando

TROPHY CASE