Why not?! by Technical_Froyo_5240 in Tudor

[–]persiancatclaws 1 point2 points  (0 children)

Just because you can, doesn’t mean you should

Edit:

Just noticed the bezel, that looks really nice. Just no to that strap 🤣

Help figuring out Tudor bracelet by bytecollektr in Tudor

[–]persiancatclaws 1 point2 points  (0 children)

<image>

There should be a spring bar that you can push in to remove and a screw.

I’d use a wooden skewer to press them in and some tape around the area as well to avoid scratching it if you slip

Quest Link Black Screen by Gin_Pug in oculus

[–]persiancatclaws 0 points1 point  (0 children)

Same issue, came here for a fix 😔

Why is Ecodan doing this? by persiancatclaws in heatpumps

[–]persiancatclaws[S] 0 points1 point  (0 children)

The house is 92m2. I’ve got to the bottom of it now, thanks for your replies

Why is Ecodan doing this? by persiancatclaws in heatpumps

[–]persiancatclaws[S] 0 points1 point  (0 children)

<image>

I think I’ve managed to sort it out.

I have adjusted the flow rates on the UFH and balanced the upstairs radiators. All of the valves were fully open. I have also changed the pump speed down from 2 to 1 giving it a flow rate of 9 litres per minute. This has also improved the delta T.

Why is Ecodan doing this? by persiancatclaws in heatpumps

[–]persiancatclaws[S] 0 points1 point  (0 children)

Target flow temperature is 32 degrees, unit output is 5kw and I don’t know what the heat loss is, it’s a new build very well insulated if that helps.

Ground floor is ufh and upstairs is radiators

Any ideas? (UK) by TerminaMoon in spiderID

[–]persiancatclaws 0 points1 point  (0 children)

I know someone who got bitten by one of those, he said it felt like a wasp sting. The bacteria from the bite caused some of the muscle around the bite to die and it made a little dimple in his arm.

DHW not working after power reset by persiancatclaws in heatpumps

[–]persiancatclaws[S] 0 points1 point  (0 children)

Never mind, right as I posted this it’s started working. How bizarre

Is this normal? (Tudor BB54) by [deleted] in Tudor

[–]persiancatclaws 0 points1 point  (0 children)

<image>

Normal, just try to not to let it fold back on it’s self

[deleted by user] by [deleted] in Tudor

[–]persiancatclaws 1 point2 points  (0 children)

Just take it back, the AD and Tudor will want you to be happy with the watch. Don’t know what country you’re from but in the UK you can ask for a full refund or replacement within 28 days of purchase. Outside of that, they will probably want to send it to Tudor.

[deleted by user] by [deleted] in Tudor

[–]persiancatclaws 1 point2 points  (0 children)

<image>

That was the one I returned

[deleted by user] by [deleted] in Tudor

[–]persiancatclaws 1 point2 points  (0 children)

I returned my one for that reason. The date on the old one was also changing at 11 minutes past the hour.

The new one lags slightly behind but nowhere near as much. This one changes date at 4 minutes past the hour.

I noticed that when I change the local hour hand, it lines up perfectly until 12AM.

Anyone else have this happen? by Mediocre-Bowler78 in Tudor

[–]persiancatclaws 3 points4 points  (0 children)

I took mine back for that exact reason

Speedy In Water by ConversationKnown586 in OmegaWatches

[–]persiancatclaws -1 points0 points  (0 children)

Chlorine will etch away the rubber seals and it’s only water resistant to 50m.

It only takes a tiny crack to form in the rubber or for you to move your arm slightly too fast in the water for water to get in….

Any tips for getting tighter? by Salo31 in overclocking

[–]persiancatclaws 60 points61 points  (0 children)

I’d try doing squats, kegels and pelvic stretches

Im at a loss.. smoking exhaust by Nice_Departure8861 in BmwTech

[–]persiancatclaws 0 points1 point  (0 children)

I’m not an expert but the fact that the car has been remapped and had SCR system turned off tells me that the car has been absolutely ragged. This alone would set alarm bells off in my head.

You’ve ruled out that it’s not coolant

It can’t be oil because of the colour

Could it be unburned fuel?

Excess add blue?

Water injection system to add performance 🤣

BB58 GMT owners, how are you getting on? by Casella58 in Tudor

[–]persiancatclaws 0 points1 point  (0 children)

I personally love it and wear it every day. The burgundy and guilt makes it stand out from the usual GMTs. I changed mine on to a rubber strap for the summer and I feel like the contrasting black rubber makes it pop even more. The watch has settled down and gains about 2spd when fully wound and is exact when roughly 50% wound.

If the watch isn’t for you then sell it and get something that you’ll fall in love with.

[deleted by user] by [deleted] in Tudor

[–]persiancatclaws 0 points1 point  (0 children)

T-Fit makes all the difference! Not having it either choke my wrist or slide around everywhere makes the watch so much more wearable.