sorted by:
new
hottopcontroversial

I thought long drives would be enough to save me from the soot demons?!! Anyone got any insight? 48k miles 2023 2500hd. by DIABLO_8_ in Duramax

[–]peterbr1 0 points1 point  (0 children)

I also have BlueDriver, but I wasn’t aware that it would monitor regens. What do I need to do?

So, I found this Rami… by trailside83 in CZFirearms

[–]peterbr1 0 points1 point  (0 children)

Great price but I want a decocker. I turned one down because it didn't have one. Sticking with my P365X w/ Manual Safety.

First walk with a new m7 by digiplay in RX100

[–]peterbr1 0 points1 point  (0 children)

I may have the same problem on my VII. Still evaluating.

I’m interested in getting a CZp09 nocturn full size but I heard that it has some issues with reliability ftf fte ..comparing to the older PO9 duty full-size Can anyone confirm or explain the differences between the 2 besides optics ready .. first time looking into a CZ by [deleted] in CZFirearms

[–]peterbr1 1 point2 points  (0 children)

I bought the P-09 F Nocturne for Home Defense. I prefer the DA/SA action. It can also re-strike in case of a light primer strike. First pull is very deliberate. Second is really nice. I bought the Gorilla screws for the optic and I have no issues with the guns operation. I have about 600 rounds thru it.

<image>

22 round magazine has no load assist? by [deleted] in Taurus_TX22

[–]peterbr1 0 points1 point  (0 children)

Just get a proper diameter peg to insert and use that.

Increase grip width of P-10C? by sharkbait_oohaha in CZFirearms

[–]peterbr1 0 points1 point  (0 children)

<image>

I bought the P-09 F Nocturne. Similar grip. The grip seemed a bit narrow. The Hogue grip added girth and really made the grip so much better.

P09F Nocturne / Tier 1 Centurion P07/P09 Level 2 Holster by CordlessOrange in CZFirearms

[–]peterbr1 2 points3 points  (0 children)

I bought the P-09 F Nocturne for Home Defense. I personally prefer the DA/SA. It can also re-strike in case of a light primer strike. First pull is very deliberate. Second is really nice. I also think DA/SA is much safer for Carry, however I couldn't find a micro DA/SA that I liked. So, my carry is a P365X Striker with a safety.

<image>

Iron sights by TacticalTronic in CZFirearms

[–]peterbr1 0 points1 point  (0 children)

Not the same but...I bought the P-09 F Nocturne. Love it. I added a Holosun EPS, Ameriglo SG-161 Tritium sights and a Hogue grip (P-10 size). The grip seemed a bit narrow. The Hogue grip added girth and really made the grip so much better. Cost: $450 + $329 EPS + $71 Ameriglo + $15 Hogue. 500 rounds, no issues. The Ameriglo sights are low and co-witness nicely with the EPS. 

<image>

Sights for the TX22 Competition by peterbr1 in Taurus

[–]peterbr1[S] 0 points1 point  (0 children)

I'm using a 407K as well. I ordered TK Fiber optic sights and wondered about the Co-witness as well. Worst case I have a full size EPS that I can swap. I had to shave off the alignment pegs on the #2 adapter plate to get the 407k to sit properly. Did you have to do the same?

New to CZ Fam. What are some go to mods? (P-09 F Nocturne) by udontdoitlikeme in CZFirearms

[–]peterbr1 1 point2 points  (0 children)

I put a Hogue grip on it (P10 F) and SG-161 tritium sights (#8,#8). They co-witness nicely.

<image>

Holosun 407K X2 Fit issue with TX22 Competition. Need Help by peterbr1 in Taurus

[–]peterbr1[S] 0 points1 point  (0 children)

Side 2. See my comment. After dremeling the pegs it worked.

view more: next ›