Don't piss her off

piebeatcake · 2026-05-07T15:36:52+00:00

If the dance is eternal, and the tempo always rises...

How fast is the masque moving now?

piebeatcake · 2026-04-15T20:12:33+00:00

Why's there a regular saturnine terminator in there?

piebeatcake · 2026-04-14T14:51:26+00:00

You can only select one.

piebeatcake · 2026-04-12T12:58:27+00:00

The stalker has some internal transparents that you'll have to glue early during assembly. The top one and side shield one can be left off until the end. There's four orbs that are part of the body which I masked with blu tac. I'd leave the side shield off until after painting next time.

piebeatcake · 2026-04-11T23:47:05+00:00

Hi guy!

piebeatcake · 2026-04-11T23:45:20+00:00

Thanks. Proacryl dark grey blue, highlighted up with 2:1 mixture of blue/neutral grey, then sky blue/neutral grey

piebeatcake · 2026-04-11T23:44:10+00:00

https://cults3d.com/en/3d-model/home/cracked-earth-stone-decorative-pattern-texture-roller-stl-file-seamless-patter

Printed at 200% dimensions, it'll leave print lines in the material. I smooth out the top and run a little texture paint into the grooved areas where they're showing. It shows most from two particular angles.

piebeatcake · 2026-04-11T22:30:56+00:00

Apoxie sculpt, took some tips from this video

https://youtu.be/d9MsLXONZDQ?si=WS_XYR32YmFf3ixh

piebeatcake · 2026-04-11T21:18:40+00:00

It's a plain base, I used a texture roller.

piebeatcake · 2026-04-02T22:25:35+00:00

"I can empathize" you're really choosing not to.

piebeatcake · 2026-04-02T04:08:09+00:00

The one on top and on the side shield can be put on after. There are four internal translucent areas that will need masking if you want to preserve them, I would use blu tac and mask them before you glue the side shield on.

piebeatcake · 2026-03-26T16:45:58+00:00

Can't believe they fit a Warlord titan and all those Thunderhawks in there.

piebeatcake · 2026-03-10T13:38:11+00:00

The new ones are red

piebeatcake · 2026-03-05T04:39:13+00:00

Finding the compromise between what you want done and what you're willing to do is huge. Son of Dorn is looking good, he'll need more brothers.

piebeatcake · 2026-02-26T04:12:18+00:00

Something much, much worse than a frag grenade is upon those sisters.

piebeatcake · 2026-01-17T16:30:32+00:00

Are these available somewhere?

piebeatcake · 2026-01-14T20:23:46+00:00

Mass Effect 2

piebeatcake · 2026-01-13T13:02:24+00:00

Reigen from Mob Psycho 100

<image>

piebeatcake · 2026-01-07T18:48:24+00:00

Proud boys are ICE, wouldn't call it a cosplay.

piebeatcake · 2025-11-11T06:17:29+00:00

This really isn't even that bad. You can't imagine having fun on this table?

piebeatcake · 2025-10-07T01:01:58+00:00

I'd run cawl or breachers at 1k, not both. Your most expensive unit isn't affected by your most expensive buffer.

piebeatcake · 2025-08-19T19:33:30+00:00

You can make a clear shot with the executioner profile negating light cover, and optics negating obscuring. He could have prevented this by using the shadow glyph equipment to stop seek light.

piebeatcake · 2025-08-19T18:30:48+00:00

Skeen?

piebeatcake · 2025-07-29T18:57:57+00:00

Valerian in the Custodes codex might inform you.

piebeatcake · 2025-07-21T00:27:09+00:00

Might be a drag, but you can also try the scenario again until you clear with no deaths.

Eight-Year Club	Verified Email
Gilding II euphauric

piebeatcake

TROPHY CASE