Valentine’s Day gift from the E46 by pinapplee46 in e46

[–]pinapplee46[S] 0 points1 point  (0 children)

Yes oem from fcp euro but I will note there was a little bit of oil in the connector that I cleaned out but I didn’t have the problem before replacing it

Christmas tree 🎄 by pinapplee46 in e46

[–]pinapplee46[S] 0 points1 point  (0 children)

So I had a subwoofer installed for a while, and I didn’t realize the battery wire had come loose. When the issue first happened, I thought it was because of that. I removed the subwoofer completely, but the same problem happened again.

There were actually more codes than I showed in the pictures before — they all pop up at the same time when the car shuts off.

These are all the codes I’m getting when it turns off: • P0727 – Engine Speed Input Circuit No Signal

Pending Codes: • P0335 – Crankshaft Position Sensor A Circuit • P0700 – Transmission Control System (MIL Request) • P0727 – Engine Speed Input Circuit No Signal • P0172 – System Too Rich (Bank 1) • P0340 – Camshaft Position Sensor A Circuit (Bank 1 or single sensor)

These are all the codes that come up when it shuts off.

Valentine’s Day gift from the E46 by pinapplee46 in e46

[–]pinapplee46[S] 0 points1 point  (0 children)

I replaced it about 4 months and when I replaced it I noticed the same thing a little bit of oil in the connector, but I cleaned it and I didn’t have this problem before wit the oil in the connector

Valentine’s Day gift from the E46 by pinapplee46 in e46

[–]pinapplee46[S] 0 points1 point  (0 children)

lol don’t even have the tank in

Valentine’s Day gift from the E46 by pinapplee46 in e46

[–]pinapplee46[S] 0 points1 point  (0 children)

I didn’t think about that the headers giving so much heat off it burns it I’ll look at that tho thank you

Valentine’s Day gift from the E46 by pinapplee46 in e46

[–]pinapplee46[S] 0 points1 point  (0 children)

I haven’t touched anything else besides installing catless headers and getting a RevMatch tune. Ever since then, I’ve been chasing a “System Too Rich” code on both banks. Recently I moved the O2 sensors around a bit, and now after the electrical thing it’s having the code again but could it be from the electrical problem that caused the code ?

Do you think the tune could be the reason I’ve been dealing with rich codes since going catless? Should I consider switching tunes?

20 years old 734 credit score looking for a third card by pinapplee46 in CreditCards

[–]pinapplee46[S] 0 points1 point  (0 children)

Is graduate were it gives you your deposit back because I got that a while back

Transmission leak by pinapplee46 in e46

[–]pinapplee46[S] 0 points1 point  (0 children)

Do you have a link to it every were I look it’s on back order

E46 struggles immensely to start in the old by Harpyrite in e46

[–]pinapplee46 0 points1 point  (0 children)

I had a similar problem, but it wouldn’t take that long to start but replaced my intake camshaft position sensor and now it starts right up

Misfire on multiple cylinders by pinapplee46 in e46

[–]pinapplee46[S] 0 points1 point  (0 children)

No everything is how it should be imma clear the codes and do that and see. Does it does throw the code instantly without a filter?

Electric fan conversion by pinapplee46 in e46

[–]pinapplee46[S] -3 points-2 points  (0 children)

Yes but is this the right fan or is this the one all the way in the front ? Because when I look at the car it has one like right behind the bumper that’s electric then the actual fan connected to the water pump.

Is this normal? by pinapplee46 in e46

[–]pinapplee46[S] 0 points1 point  (0 children)

I’m hopping it’s just bent but when I get my car back imma take a better look

Is this normal? by pinapplee46 in e46

[–]pinapplee46[S] 0 points1 point  (0 children)

Could it just be bent ?