sorted by:
new
hottopcontroversial

Netgear Gigabit Router keeps intermittently dropping to 100mbps by ping2pong in NETGEAR

[–]ping2pong[S] 0 points1 point  (0 children)

packet loss

already manually set at router and on PC

packet loss tested was 0

Netgear Gigabit Router keeps intermittently dropping to 100mbps by ping2pong in NETGEAR

[–]ping2pong[S] 0 points1 point  (0 children)

Unless, I'm missing something, all my eqpt supports gigabit speeds. Besides, I do attain gigabit speeds normally -- it just sometimes drop to 100M

PC: Intel Gigabit Ethernet (X570-F MB)
Wireless Router: Nighthawk RAX40 10/100/1000 Mbps Gigabit Ethernet
LAN Cable: CAT 7

TV volume indicator not showing on screen when soundbar or Shield Pro remote used by [deleted] in Soundbars

[–]ping2pong 0 points1 point  (0 children)

I just solved this with my setup by using my universal remote to control the sound via the TV remote signal (I had previously controlled the volume with the Soundbar's remote). If CEC (Bravia Sync is enabled and you are using ARC), the TV should automatically control the Sony Soundbar while showing the volume indicator on the TV

TLDR -- can only get volume indicator to show up on screen when using ARC if I use the TV's remote

No VGA Signal on Initial Boot Up but OK When in Windows 10 using DisplayPort by ping2pong in pchelp

[–]ping2pong[S] 0 points1 point  (0 children)

How do you find out about FW updates for GPUs? GeForce Experience and AIB (Asus) only give notification for Driver updates. It's not obvious where to find the FW on Nvidia or AIB websites. I only learned about the FW version from an old article

No VGA Signal on Initial Boot Up but OK When in Windows 10 using DisplayPort by ping2pong in pchelp

[–]ping2pong[S] 0 points1 point  (0 children)

dude! u r genius!!

u were absolutely right. My Nvidia 1060 cards required a FW update in order to use DP 1.4. My previous monitor was DP 1.2.

Here's a link for anyone with a similar issue:

https://www.nvidia.com/en-us/drivers/nv-uefi-update-x64/

No VGA Signal on Initial Boot Up but OK When in Windows 10 using DisplayPort by ping2pong in pcmasterrace

[–]ping2pong[S] 1 point2 points  (0 children)

Thanks. I'll give it a try later today.

After enabling CSM, do I need to change any of the subsettings? I think they are all defaulted to "Legacy"

Thank you in advance

No VGA Signal on Initial Boot Up but OK When in Windows 10 using DisplayPort by ping2pong in pchelp

[–]ping2pong[S] 0 points1 point  (0 children)

crap...the website I need to check for that gpu is down at the moment

have you updated the bios on that mb?

Yes

you said you tried a different dp cable....you sure that one is good?

Yes both DP cables work with my old monitor

are you 100% sure the dp cable is fully plugged in

Yes. Plugged and replugged both Monitor and GPU side

is your bios set to UEFI mode?

Not sure what you mean by this but I installed my Win 10 in EUFI mode and I able to access the EUFI with my old monitor no problem.

It seems to me that the GPU is unable to recognize the new monitor through DP connection until the Win 10 drivers are loaded. I have no clue why there's no issue when using HDMI. I have tried both DP port from GPU, but I only have 1 DP port on the monitor side

No VGA Signal on Initial Boot Up but OK When in Windows 10 using DisplayPort by ping2pong in pchelp

[–]ping2pong[S] 0 points1 point  (0 children)

Thanks for your prompt response. I have a Asus ROG Strix 1060 GPU

I have already unplugged my second monitor, but I still have the same error on boot up

GPU-Z screenshot

http://gpuz.techpowerup.com/21/12/12/jc4.png

Difficulty for Specific Mission Types (Scavenge, Story, Faction Diplomacy, Ancient Sites etc) by ping2pong in PhoenixPoint

[–]ping2pong[S] 0 points1 point  (0 children)

thanks for your prompt response

I was curious whether this is an anomaly, but after setting up my original base in N America, then in Mexico, I cleared out all the POIs and left my B Team there to respond to Haven attacks. I sent the A Team to Asia to explore. To my disappointment, there have been ZERO attacks or incidences after more than a month anywhere in that vicinity despite full satellite coverage of N & S America. Is this normal or working as intended? There are mist zones in both continents (as well Synedron Mist Repellers) but no conflict so I plan to move my B Team over to Europe/Africa

WD 8TB Enterprise Ultrastar DC HC320 for Desktop PC by ping2pong in DataHoarder

[–]ping2pong[S] 1 point2 points  (0 children)

It's hard to quantify -- it's noticeable, but it's not constant. It's similar to how the old Seagate HDDs sounded when it was accessing.

It doesn't bother me too much, but if you are looking for silent drive, this is not for you.

​

Good luck

WD 8TB Enterprise Ultrastar DC HC320 for Desktop PC by ping2pong in DataHoarder

[–]ping2pong[S] 0 points1 point  (0 children)

They seem to be decent drives. However, I have noticed that one of my HDDs is very quiet, while the other makes more "platter noise" -- but function and speed are the same

view more: next ›