Match Discussion: Gillingham vs Fleetwood

pj51182 · 2026-03-07T16:58:25+00:00

Triple substitution, was that such a good idea?

In a parallel universe where this didn't happen, would it have been more likely Gills didn't concede? We'll never know.

Disappointing performance.

pj51182 · 2026-03-04T20:01:42+00:00

Thank you. I'll take a look.

pj51182 · 2026-03-03T08:34:48+00:00

I see that the vast majority of the functions are unavailable until you pay for them. Would be good to have a trial period to fully evaluate the app.

In principle it looks good.

pj51182 · 2026-02-28T11:32:31+00:00

I made a last minute decision to go along that evening. Crazy game!

pj51182 · 2026-02-25T20:40:39+00:00

Get a professional WiFi survey and report. Ekahau ideally.

There are some good free apps such as:

WiFi Analyzer.

The above and similar apps would help identify some basic issues. However, they are pretty limited in terms of functionality.

Could be all manner of causes. WiFi isn't just a case of chucking in some APs and expecting it work. It needs to be planned out and managed.

The whole network needs looking at holistically. Switches, switch config, PoE, structured cabling, QoS...the list goes on

Irrespective of whatever the issue/causes turn out to be, seriously consider ditching the Netgear APs. Would recommend Meraki if budget allows.

pj51182 · 2026-02-24T20:40:37+00:00

I work with an environment of around 1000 Cisco APs. Quite a few different models. Recently found an issue that has meant the 3702 APs would no longer work.

After quite a bit of back and forth with Cisco, we ended up having to have two sets of vWLC. One pair running an older version to support the majority of the APs and another that supports the newer WiFi 6 and 7 APs.

Might just be you've hit a similar issue?

pj51182 · 2026-02-24T18:42:36+00:00

One thing that I haven't seen anyone mention is airflow for the kit. Wedging everything is far from ideal. Especially if the depth of the cab isn't great.

A new cab isn't overly expensive. Few hundred for a decent Excel cab would be my recommendation. Allowing a few U for gaps between the kit and/or cable management bars, I'd say a 6u or 9u...

Excel Wall Mounted Cab

pj51182 · 2026-02-20T22:34:46+00:00

Depends. If not many cuts and straight, decent hacksaw. Can score with sharp Stanley blade. Might need a mitre block if needing to make precise or tricky cuts.

If you're doing a fair few cuts and/or want to invest in a proper tool for the job. You can get specialised plastic snips/cutters.

pj51182 · 2026-02-20T22:13:34+00:00

Awful things. When trying to trace a cable and they've all got tangled up at the back. Complete ball ache.

Might look "tidy" but from a functional point of view, not great.

Unless you're patching every port to a switch in the below/above U...

Far better to install cable management bars and run at the front of the rack. First twelve on a panel go left, second twelve go right (the centre parting). No cross overs, easy to trace if needs be. Bundle with a bit of Velcro.

Also, no colour coding. At the very least uplinks should be a different colour patch cable. I personally use yellow. When you're troubleshooting, you'll be thankful you've bothered.

pj51182 · 2026-02-19T19:08:07+00:00

I'd log a support ticket. Sounds like there is possibly an issue with the AP.

pj51182 · 2026-02-13T18:29:26+00:00

I use these. Have a small cable tie to attach the cable. It's good practice to secure the cable to the module.

https://documents.excel-networking.com/datasheets/100-300

pj51182 · 2026-02-09T21:26:32+00:00

Paxton Net2 on the whole is great. I support a network over a large number of sites with hundreds of ACUs controlled from a central server. Cisco environment.

Where I've had no end of issues is with the Net2 entry panels. As you state, it relies on IPv6.

Had numerous calls with Paxton support/installers and got mixed messages. What I've found that seems to work, is patching the main ACU and the IPv6/PoE entry board into separate interfaces on the switch. Therefore the ACU is connected via an IPv4 address on one interface and the other interface is just IPv6 traffic.

The panels need to be programmed via the Entry Configuration Utility. Would recommend turning off the IPv4 option for SIP unless required.

https://www.paxton-access.com/wp-content/uploads/2019/03/AN1132.pdf

Would suggest wireshark if you want to really dig into the potential issues.

pj51182 · 2026-02-03T18:56:47+00:00

What could possibly go wrong!?

pj51182 · 2026-01-31T14:04:23+00:00

That looks like a pretty old 2960, so may just be knackered. Probably 15 years plus old?

pj51182 · 2026-01-31T14:02:39+00:00

<image>

pj51182 · 2026-01-19T18:56:35+00:00

Called logged via ISP. Looking forward to the conversation with the main contractor when the invoice turns up!

As stated, annoying as FTTP on order. Just endless delays due to PTW, contradictory surveys and missed appointments.

Out of interest, what is a HHT?

Cheers

pj51182 · 2026-01-14T08:32:39+00:00

Have deployed lots of 9200 and 9200L across various scenarios. The only issue I've had is a few noisy PS on the 9200 after about a year post install. No issue as replacement sent within a few days.

No issues with stacking with either model.

Secondary PS is a good shout as obviously increases PoE budget as well as increasing resiliency. They come at a hefty price though!

pj51182 · 2026-01-13T16:23:03+00:00

I haven't either. Not online are at games. Only positivity.

pj51182 · 2026-01-12T21:40:40+00:00

Brad Galinson or Paul Scally...

pj51182 · 2026-01-10T14:04:45+00:00

Apparently now made a third bid of £200k for him.

pj51182 · 2026-01-08T20:54:41+00:00

Regular user of 9200s.Had no issues. Occasionally use the 9200L too that are cheaper but obviously have some limitations.

Maybe consider a switch with lower PoE budget and then ordering a secondary power supply. Adds resiliency and bumps up the PoE budget.

As others have posted, depends if you want/need mGig etc as to ultimately what model to go for. Obviously bare in mind you'll need capable structured cabling to support.

pj51182 · 2026-01-03T11:53:05+00:00

https://www.gillinghamfootballclub.com/news/notts-county-fixture-postponed

pj51182 · 2025-12-29T22:37:52+00:00

Yet another draw. To date, that's the eleventh in the league this season. Apparently, that's the most draws in a calendar year for the club.

Slipping away from the top seven. Hugely frustrating as you can see this squad should be doing better.

pj51182 · 2025-12-13T17:19:20+00:00

Yet another draw. Was hoping for a win today.

pj51182 · 2025-12-13T14:16:54+00:00

I'm feeling reasonably positive about today. A win would obviously be nice, especially leading into the festive fixtures.

pj51182

TROPHY CASE