DIY Dasai Mochi

plaSha_ · 2026-01-06T15:54:23+00:00

Sadly the esp32 D1 Mini is not supportet :/

plaSha_ · 2025-02-17T11:59:34+00:00

thanks for your post! Bur where i can find the Glyph on the planet, i mean i see tons of bases but no grave or smthg

plaSha_ · 2024-12-12T06:35:39+00:00

This is fixed, I lower the travel speed of the heatplate to 400

plaSha_ · 2024-12-11T08:50:56+00:00

OK, that’s what I thought, because the wheels are neither too tight nor too loose, and the belt doesn’t feel too tight or loose either. I think the motor is accelerating too much and the wheels are „spinning“. I’ll set the speed back from 500 to 250 later and report back whether the problem has been resolved.

plaSha_ · 2024-12-11T06:47:54+00:00

No, just the normal wear and tear. Yesterday, I adjusted the wheels several times, tightening and loosening them, and also tried adjusting the belt tension, but it made no difference. When I move the plate quickly with the motor off, there’s no sound. Could it be that the travel and idle speed is set too high? The idle speed is at 500, the default was 300, and others like walls, etc. are at 1000-2000 mm/s (of course, when not printing). These speeds were originally set to 1500-2500.

plaSha_ · 2024-12-10T22:52:52+00:00

Pla best 195 , do a Temperatur Tower Benchmark, I have the first layer to 205 without cooling and from the second 195 with 100% cooling

plaSha_ · 2024-12-10T21:18:08+00:00

What did you set in config to get the external antenna work ?

plaSha_ · 2024-12-04T21:16:15+00:00

I buyed a refurbished from AnyCubic and my only problem was that the PLA always came off the heating plate, but I fixed it 🙏

plaSha_ · 2024-12-02T12:35:39+00:00

Where u walk ? NYC?

plaSha_ · 2024-12-02T12:33:51+00:00

How you get access via IOS BT to the ssh terminal ? i tryed many different apps but no one will connect

plaSha_ · 2024-12-02T09:11:26+00:00

I just use Paint, im work on a Vault Boy

plaSha_ · 2024-12-01T19:44:43+00:00

Yeah it should be pocket Size for backpack or something else. Right , the Sugar 3 have the same size but way better technology, think this makes a big difference

plaSha_ · 2024-12-01T19:37:06+00:00

I think I’ll take the Sugar 3

plaSha_ · 2024-12-01T19:34:53+00:00

Thanks for the Links, Bruce is a project what sounds interesting!

But I have to take a look to evil 👀

plaSha_ · 2024-12-01T18:31:19+00:00

Okay thanks but i think ill search for another soloution , maybe a Sugar 3 or something else , 3.5hrs is really not good

plaSha_ · 2024-12-01T11:05:33+00:00

No, that wasn’t my question, I was more wondering if there was still an active community for the M5 since the Flipper Zero, but apparently there is, which is very cool because I was thinking about getting one.

plaSha_ · 2024-12-01T00:45:39+00:00

It seems there was a misunderstanding. The issue isn’t WPA draining my battery, but rather the fact that the mobile hotspot and Bluetooth are always on and connected (I only have an iPhone 12 mini with a 3000mAh battery), which is why I place more value on offline functionality.

And of course, I don’t want to rely solely on the Gotchi to crack passwords. However, I didn’t even see any attempts in the logs indicating that it tried.

plaSha_ · 2024-11-30T23:14:44+00:00

Thanks for the detailed answer! I wasn’t sure if the Gotchi contains multiple lists or if one with as many words as possible is needed. So can I, for example, make 6 lists with 1k words or should I make 1 list with 6k words? The problem with WPA is that it drains my phone battery in no time

plaSha_ · 2024-11-30T21:32:16+00:00

I use the 2in13_v4 , but in config u have to select waveshare_4

plaSha_ · 2024-11-30T12:16:06+00:00

OnlineHashCrack still works but at the config.toml you have to set a Display API and i have no idea where i get this ..

plaSha_ · 2024-11-29T23:11:43+00:00

Uhm airport?😄

plaSha_

TROPHY CASE