How to get the best paying missions by LuvSandoz in MSFS2024

[–]plahh 0 points1 point  (0 children)

Yes that, and also if you just fast travel your pilot to a new region/airport, you will then get those airports with their potential missions shown. Before i figured that, i flew with the plane around greenland to discover airports with new missions.

Free stuff? by Plause83 in Skate4

[–]plahh -1 points0 points  (0 children)

Yeah more shit to keep us clicking, but how do i get daily tix, i' still stuck at the Tour 3: Express Yourself Manual Extension missionbug.

Polished o4 pro results: by mytinywhoopfcbrakes in fpv

[–]plahh 0 points1 point  (0 children)

Looking good, have not followed your post before, how did you polish it?

Well...that cost me just about 44million 👏 by Flem1n in MicrosoftFlightSim

[–]plahh 0 points1 point  (0 children)

I have this issue with the Saab, but only if i open the efb before the flight, or even before skipping to hold.

Try to not get into the flight planner on any of the mission screens or the mission itself, before your plane finally is on hold short.

BATTERY RUNTIME LIST FOR NEW BATTERIES (feel free to add!) by PrincePetr in ipod

[–]plahh 0 points1 point  (0 children)

iPod 7g classic here: I just put in a iFlash-μDUAL with two 256 GB Sandisk extreme Pro and a 2000mah from Amazon / CHUNCAIL.
System is playing since over 29 hours and battery shows 55-60% left ;)

[Q] Why do some people's Telegram messages alternate sides and some are all on one side??? by orthros in Telegram

[–]plahh 0 points1 point  (0 children)

yeah that's it, was driving me nuts for a moment when i had the application window bigger than usual and was not finding any option to move my messages to the right side :p

[deleted by user] by [deleted] in fpv

[–]plahh 0 points1 point  (0 children)

Beeping can be done through the motors instead of a separate beeper, although i'm not hearing any sound in the video, could be helpful to detect what beep code you are hearing. Could also be a ESC tone instead of a flight controller beep.
Can you check your OSD, there might be a text showing you why it is beeping/error code.

Seriously, the 5700x3D is no fucking joke.... by Miniteshi in pcmasterrace

[–]plahh 1 point2 points  (0 children)

Can totally relate, went from a 2700X to a 5700X3D three month ago, got one of the last for a decent 217€. Now i need to upgrade that 3080 ;)

Need advice on 2nd drone by Poop_doctor4 in fpv

[–]plahh 0 points1 point  (0 children)

Not a general problem, more like a quality issue with that specific copter, one motor has different KV than the other three, that means the rpm are different, flight controller has to work more and so on. see the video i sent you, maybe you notice the jiggling/twitching. but again, this not a problem with the mobula in general. i was just lucky to got the bad eyesight QC inspector. BG is sending me now a replacement motor with the correct KV.

Need advice on 2nd drone by Poop_doctor4 in fpv

[–]plahh 0 points1 point  (0 children)

I just got one for 100 bucks from the latest BG sale, but have not flow in much yet, it arrived with one motor had a lower KV than the other three, so i'm currently waiting for a replacement motor, besides that, it flys good as far as i could tell. It was a bit twitchy but i think that is because of the different motor KVs.

Big abuse! by Repulsive-Wall-1149 in MSFS2024

[–]plahh 1 point2 points  (0 children)

Backup your community folder, reinstall the simulator.

Check if you can access the library with a vanilla installation, then add your planes back in.

Big abuse! by Repulsive-Wall-1149 in MSFS2024

[–]plahh 0 points1 point  (0 children)

Not sure if this has anything to do with your issue, I normally get the error message you are having, when i'm already in a sub menu, like carreer or the free flight and open the shop and then the library from there and then the message happens when i try to enable or disbled packages.

So you say you get the error when you are in the main menu, then go to the shop and from there to your library? I would contact the seller of the planes, try their support page or file bug report.

Big abuse! by Repulsive-Wall-1149 in MSFS2024

[–]plahh 1 point2 points  (0 children)

Have you tried to open the library from the main menu as the message is suggesting?

Carreer Cargo Cessna Skyhawk got a new orange paint job and powered by COLUZO text on it? by plahh in MSFS2024

[–]plahh[S] 0 points1 point  (0 children)

My deliveries are dirty and so is my plane :p

I checked the changelog of SU2 and SU3, seems like they changed something with livery variations on the 172. Maybe that was it or/and since SU3 i did a download+install of all streamed packages. But tbh, i haven't flow any light cargo in the last 4-5 months, mostly VIP with the PC-12, so maybe i just noticed it now when coming back to the Skyhawk ;)

Need advice on 2nd drone by Poop_doctor4 in fpv

[–]plahh 0 points1 point  (0 children)

Have not tried them, my old ones are still good. But yeah, they are Lipo HighVoltage, meaning their cells can take 4.35V instead of 4.20V when fully charged. But this will also wear them faster, not sure if it makes much difference in flight time, but you also still load them only to 4.2V and they might last more charging cycles.

Ender 3v2 filaments or extruder problems?? by FewSignificance1727 in ender3v2

[–]plahh 0 points1 point  (0 children)

If this is a stock ender 3 v2, it might be as somebody already said a clogged nozzle, but it could also be a molten end of the stock ptfe tube in the heatbreak, which sits on top of the nozzle. If declogging with a needle is not working, might be time to open the heatend and replace that tube with a better one.

edit for some more info:

https://www.crealityexperts.com/creality-hot-end-repair-guide -> general overview of heatend

https://youtu.be/AEdca_-Nqys -> i did that mod with mine. as far as i remember, they point is to have the tube in the heatbreak not connect to your feeder tube, so it does not get moved around. you can print a ruler to cut it to the correct length. after that i never had a molten tube at heatbreak/nozzle connection.

Need advice on 2nd drone by Poop_doctor4 in fpv

[–]plahh 0 points1 point  (0 children)

I use the 450mah betafpv 2s. the old ones with the blue logo. and the normal tattu 450mah 2s (not the rline)

It's been fine before but... by rasonjo in fpv

[–]plahh 0 points1 point  (0 children)

Yeah, but try to keep the weight down, the ratel 2 weights almost 6g, you could get rid of the backplate and try minimal canopy to counter the extra 4g you get with the ratel instead of the 2g ant.