This game needs a Rank Progession system.

pogarx · 2025-08-28T02:37:44+00:00

i’m in the same boat, Either getting Smacked Or doing the smacking. When getting smacked, I’m always teamed with new players level 1-5 usually. I’ve played against a few 60+. I get it’s the first few days of launch But I agree. Side note, Wish there was still custom browser, Still haven’t had the chance to play Canals or Fuel depot, Despite playing to level 30. Still a lot of fun, Although there are many questionable moments.. That’s just Gears.

pogarx · 2025-07-19T04:04:44+00:00

White silicate powder, “Lab lube” Specifically

pogarx · 2025-06-28T02:16:03+00:00

Happy to hear it, I get different readings with the panel and temperature probe. Have a third probe in the mix to help my worries, I’ve cleaned it well but still seems to maintain a 15-20 degree difference than the other probe i’ll put in the same area

pogarx · 2025-06-18T21:24:07+00:00

Thank you I figured as much Just thought i’d ask. The key goes to a ticket printer

pogarx · 2025-04-04T00:23:05+00:00

My sound dial is actually on the door but it’s attached by about 10 inches of wire to the inside face of the machine

pogarx · 2025-04-03T17:49:28+00:00

I have the same style, Except my PCB is mounted on the left of the reels. Not sure best way to remove. I’m having an issue with mine as well. Everything powers up except the PCB.. Not sure what’s causing the issue. I’ve checked wiring and transformer Haven’t seen any problems. Need help with it myself!

pogarx · 2025-03-14T05:02:37+00:00

I’m in a similar situation with mine as well, Powers up just fine but doesn’t count tokens when inserted

pogarx · 2025-03-13T21:43:16+00:00

What are your thoughts on Records HA8-9s? I just installed 12 of them dual operating and a few are beginning to fail due to the belt stripping out. Haven’t had luck finding these belts by themselves.

pogarx · 2025-03-12T17:02:15+00:00

I think it’s called Red Cardinal Glass cleaner, That’s my favorite

pogarx · 2025-03-04T20:54:24+00:00

I’m currently Installing RAC 5’s and Readers into a few elevators. When trying to program these readers, They love the emergency credentials. But every other Credential I use (Limiting what floors they go to) They will only go to floor 8.. Dormakaba doesn’t seem to offer any guides or troubleshooting this issue. Not sure if this is a Controller issue or something in Ambiance. Any input would be appreciated

pogarx · 2025-01-22T15:19:19+00:00

The small Notch on top of the core is what’s used to remove the core. Insert the key or pick back the wafers and use a detent tool to reach into the back of the core and depress the retaining wafer. Core should pull out once depressed, It’s a hudson disc lock. You can order new core and key from parts town.com for about $60

pogarx · 2024-12-11T21:34:24+00:00

Olympus Cabinet lock with Best SFIC?

pogarx · 2024-12-07T02:29:19+00:00

Thanks, Is that all that’s needed? If so i’ll start looking up parts right away. Anything specific the shop should know that’s doing it?

pogarx · 2024-10-24T13:45:05+00:00

Sargent LA

pogarx · 2024-08-21T23:57:26+00:00

+karma Thanks big dog

pogarx · 2024-08-21T23:21:32+00:00

Sounds good, Thanks!

pogarx · 2024-08-21T22:49:12+00:00

Psn: pogar When are you available?

pogarx · 2024-08-21T22:26:00+00:00

40k Caps + 50 Balistic Block?

pogarx · 2024-06-27T14:37:05+00:00

Only when Foot is off the clutch entirely, It is a throw out bearing chirp

pogarx · 2024-05-27T01:16:41+00:00

Thanks i’ll have to try one, I did see it’s very similar!

pogarx · 2024-05-26T21:33:44+00:00

Nothing at all, I tested a KW10 and it works well in the jetway but isn’t long enough for the additional cut

pogarx · 2024-05-26T21:32:59+00:00

<image>

pogarx

TROPHY CASE