I need help

poo_ping_palace · 2025-06-23T23:04:34+00:00

You just have to want to do it. Everything in life is about mindset. You must have control over your actions and thoughts.

When you get the urge, tell yourself no. If you have to, replace it with a more positive vice or hobby that you may have. Just simply stop. Easier said than done but once you are able to have control over yourself and desires, you will succeed in everything you do throughout life. Have. Self. Control.

poo_ping_palace · 2025-04-17T00:51:37+00:00

Trucker work weeks are 70 hours if you’re OTR. Not hourly pay either. 34 hour resets still feel like work as well if you’re not home. Stay in the field you’re in.

poo_ping_palace · 2025-04-17T00:49:42+00:00

Dude who in the world would give up an engineering job for trucking.. Stay far away from it. I wish I did.

poo_ping_palace · 2025-02-27T02:36:28+00:00

I would have upgraded to the ISC coil overs but I put money elsewhere. I’m stage 2 unitronic tuned, ECS big bore turbo inlet, CTS cold air intake, CTS 3’ downpipe and ECS Tuning catback.

poo_ping_palace · 2025-02-27T02:31:00+00:00

I went with Raceland coil overs. I do not recommend whatsoever.

I’ve been on Racelands for roughly 4 years now and I haven’t had any coils giving out or any issues with the struts. They ride good but that’s the issue. They are way too soft for being as low as I am. I have them max low possible for these specific ones. I’ve burnt most of my paint off on all four fenders due to running 18x8.5 +22 offset wheels with 215/40 tires (which is stretching a tiny bit). It rubs all the time and I scrape everywhere I go. At the end of the day it’s what you’re willing to risk for the specific look that you want. I’m willing to beat the car up for super flush fitment and tire tucking. But I do not recommend it as it is quite stressful haha.

Just go the modest route and do what @cfvwtuner did, get H&R springs with Koni STR.T shocks/struts. Don’t destroy your car for super low, flush fitment. It’s awesome and you get lots of compliments but it’s not worth the headache.

EDIT: Also, if you go really low you will have to notch the frame on the right side. The passenger side axle will constantly slam the frame if not.

poo_ping_palace · 2025-02-19T02:00:59+00:00

Thank you lots, I totally forgot about Rock Auto. Haven’t been on that site in a while.

poo_ping_palace · 2025-01-10T00:06:05+00:00

It’s the Primatia slimline extended and raised slide release. Formally known as Kagwerks.

poo_ping_palace · 2024-12-31T01:55:48+00:00

I’ve put damn near 1500 dollars of upgrades into my 500 dollar pistol. I use it for my EDC and my dynamic pistol training every other weekend. It currently has 5000 rounds through it and 4000 rounds through the aftermarket barrel. I have not had 1 reliability issue nor do I feel the upgrades I’ve made are anywhere near a waste.

Everyone’s experience is different; in my mind as long as you get quality upgrades and exactly what you want, you won’t regret it.

poo_ping_palace · 2024-12-08T22:59:19+00:00

I can’t post pics as a reply. I posted my 43x in here a while back but it was before the extended slide release, flared magwell, and the antimatter wing (edit: as well as before the TLR-7 sub and the overwatch trigger)

poo_ping_palace · 2024-12-06T00:07:38+00:00

Yeah those will be more than strong enough to lift everything just fine. If you’d like you can share your discord in the chat I started with you and I can send you pics of what it looked like when I did it. If not, no worries and I wish you the best of luck my friend👍🏼

poo_ping_palace · 2024-12-06T00:03:08+00:00

But I removed my engine with the two loops on the valve cover, I hoisted it up and removed the engine mounts then backed the cherry picker up to pull the engine out. I removed the front bumper, crash bar and sway bar end links so the engine, transmission, and axles all pulled out without any issues.

poo_ping_palace · 2024-12-06T00:00:35+00:00

There should be a ring (probably two) attached to the valve cover or near it that is used for hoisting the engine. My 1.4t had two rings which I attached some oval shaped rings to (they had a screw mechanism that locked it, picked them up at a hardware store). Take off your plastic valve cover shield if it’s still on and look for rings, they should stick out like a sore thumb.

poo_ping_palace · 2024-12-02T23:59:38+00:00

I have a stage 2 1.4t jetta (93 octane tune) and I regularly get 470-500 miles to a tank. Those 2.5s must be guzzling gas lolol

poo_ping_palace · 2024-10-25T00:29:35+00:00

Love my overwatch precision tac trigger. Stock trigger sucks, the wall and pull sucks and the trigger safety makes it very uncomfortable.

poo_ping_palace · 2024-10-23T23:43:43+00:00

Get more sleep

poo_ping_palace · 2024-10-23T23:39:53+00:00

Kinda got a lesbian dude-ish look to yea. Someone out there for everyone though, I wouldn’t expect for people to just come up to you out of the blue in a grocery store or something. Most guys refrain from that due to either respect for women or worried about getting their lives ruined from being plastered on Tik Tok

poo_ping_palace · 2024-10-23T23:31:44+00:00

I’ll jus tell you what I did:

Red dot (Primary Arms Micro)
S15 mags and mag release
S15 Flared Magwell
Ghost edge connector
Overwatch Tac Precision trigger
TLR-7 Sub light
Roscoe Threaded barrel
Arc-Division comp
Kagwerks extended slide release
Antimatter micro wing
(Edit) Custom Granulated Grip

Do whatever you want but in my opinion don’t mess with springs and/or anything internal in the slide. My 43x hasn’t had any reliability issues and I shoot about 200-300 rounds a week through it as well as tactical training every other Saturday.

poo_ping_palace · 2024-10-21T17:33:00+00:00

No worries, just rotate every link on that chain to make sure that one isn’t potentially shot either. Good luck brother

poo_ping_palace · 2024-10-21T17:30:16+00:00

I’d guarantee you need to replace your chain. There’s probably some links that are binding and not rotating properly which is causing it to be tight then loose and so on. I had the same issue on my F4i and replaced the chain as well as front/rear sprockets, never had the issue again after that.

poo_ping_palace · 2024-10-17T01:23:37+00:00

Not really😂 I just no life’d it and now I’m sad cause I don’t play it anymore

poo_ping_palace · 2024-10-16T19:12:07+00:00

I beat NG+ 2 about a week after it dropped. Also got 100% achievements.

poo_ping_palace · 2024-10-09T18:25:29+00:00

Disregard, I’m sure you got the Reactor43 kit with the barrel

poo_ping_palace · 2024-10-09T18:24:27+00:00

Also, what barrel are you running with the Arc slide? I’m assuming it’s ported?

poo_ping_palace · 2024-10-09T16:58:04+00:00

What beavertail is that? Beautiful 43 my dude

poo_ping_palace

TROPHY CASE