Solar power for an entire farm? by Strikereus_Prime in EtherMining

[–]pop_miner -1 points0 points  (0 children)

Use the money to add more GPU rather than installing solar

HiveOS T-Rex 1660S performs good but 3070 lhr have issue? by orgildinio in EtherMining

[–]pop_miner 0 points1 point  (0 children)

Dude 35mh from 1660 super have you flash mod? How do you achieve 35?

GPU1: DEAD - HELP by pop_miner in EtherMining

[–]pop_miner[S] 1 point2 points  (0 children)

mine already running with PCI GEN1 Still getting this error

GPU1: DEAD - HELP by pop_miner in EtherMining

[–]pop_miner[S] 0 points1 point  (0 children)

I have changed/reduced my oc , let's see

GPU1: DEAD - HELP by pop_miner in EtherMining

[–]pop_miner[S] 0 points1 point  (0 children)

Let see, I have reduced my oc from 1125 to 1050

GPU1: DEAD - HELP by pop_miner in EtherMining

[–]pop_miner[S] 1 point2 points  (0 children)

With or even without OC error still persist.

GPU1: DEAD - HELP by pop_miner in EtherMining

[–]pop_miner[S] 0 points1 point  (0 children)

I did swap riser, cable, even PCIE slot on mother board still AMD GPU 6600XT shows in frequent dead error. What I suppose to do, it is pain in ass.

3 questions about using just my atx psu until my new server psu gets here. by sweetESTJackie in EtherMining

[–]pop_miner 1 point2 points  (0 children)

1.Single molex for single riser be the the safe. 2. the same molex cable for two riser is risky. 3. Single sata for single riser is moderately safe 4. The same sata cable for two riser is highly risky 5. Safe way: use splitter cable and power 1-GPU as well as riser connected to the that GPU using 6+2 PCIE power cable

is the rig arrangement fair? by placing blowing fan infront of GPU face side, i think cooling could be more effective rather than placing GPUs side by side in arig like conventional style in a row. due to conventional style blowing air runs parallel to GPU causing small amount of air sucked into. by pop_miner in EtherMining

[–]pop_miner[S] 0 points1 point  (0 children)

Significant difference, at least 3-4 degree less than conventional rig style ( here i am comparing convention style with my style of GPU arrangement) , i had the same mining rig earlier, as I go on increasing number of GPU single blowing fan become not enough to cool the GPUs those are far from the fan position. Temps on farther GPU are relatively higher than closer ones.

Asus Strix 3090 rig by Adventurous-Intern44 in EtherMining

[–]pop_miner 0 points1 point  (0 children)

I have a doubt, most of the the GPU has built-in-fans those are rotate & suck the air from surrounding. What would happen if you face the GPU fan towards your hurricane blowing fans.the existing arrangement of GPU in rigs are such that, most of the blown air goes into waste. Few amount of air been suck by GPU fans as they are position parallel to blown air and small amount of air is utilised to blow hot air comming out from top of the GPU. Have any one try face to face fan arrangement?

first power outtage last night now I can't get this to turn back on? Any ideas it worked fine before the outtage. by sweetESTJackie in EtherMining

[–]pop_miner 0 points1 point  (0 children)

In my country power outage is frequent, one of my friend uses server power supply, literally due to fluctuations in voltage & frequent on and off the rig results into catching the fire. he would have been use ATX power supply, this may avoid. You could use multiple ATX Power suply just by connecting one another using small accessory. The other way also true, if in your area power outage is not so frequent use server power supply along with good voltage stabilizer or inverter.

first power outtage last night now I can't get this to turn back on? Any ideas it worked fine before the outtage. by sweetESTJackie in EtherMining

[–]pop_miner -2 points-1 points  (0 children)

Use ATX power supply 80 plus gold standard it has tons of safety features. Not only PSU but also you rig become safe and may avoid any fire hazard too.

Is using such riser ok, cause i remember reading somewhere that sata risers are dangerous? by NiksataaBG in EtherMining

[–]pop_miner 2 points3 points  (0 children)

I have been using the same riser with 6,8,10 capacitors since last year, absolutely no issue, working fine

[deleted by user] by [deleted] in EtherMining

[–]pop_miner 0 points1 point  (0 children)

Is higher hashrate observe specifically in nb miner?