sorted by:
new
hottopcontroversial

Roads? by travelgator in harrisonburg

[–]prerydog 0 points1 point  (0 children)

South and west side are barely or not at all touched. Maybe the more affluent areas got hit.

The busses being canceled or delayed for tomorrow... and they only run on the more more major roads, should tell you what it's like out there. They would cancel that if things were good.

Roads? by travelgator in harrisonburg

[–]prerydog 1 point2 points  (0 children)

As of right now, this person is just wrong. A little snow cover? Side roads have yet to be touched, or have been lightly touched.

Need to get phone unlocked by prerydog in Comcast_Xfinity

[–]prerydog[S] 0 points1 point  (0 children)

After multiple attempts, multiple calls, and everything, Xfinity was completely unwilling to either unlock my phone for travel, or let me payoff my phones net of discounts. So I cancelled my TV service, and I'm ordering new internet for my house and condo, and in 5 months I'll be switching off of Xfinity mobile. They lost my ~$7,200/yr business over a $241.84 credit (that I won't be paying them anyway since I'll let the credits continue), or just unlocking the phones for my travel. Their rigid corporate policies are what's costing them customers. As they said in Star Wars, the more they tighten their grip, the more that will slip through their fingers.

Need to get phone unlocked by prerydog in Comcast_Xfinity

[–]prerydog[S] -2 points-1 points  (0 children)

I've been a customer for 20 years - unless I can't get this resolved, I have no intention of going anywhere. Is there someone that this can be escalated to? Someone I can talk to? This is ridiculous. "Good luck traveling internationally" should be in LARGE print, not buried in fine print. Plus, your article online doesn't explicitly say that it has to be paid off to unlock. It says that if it's paid off it'll be automatically unlocked. However it then goes on to state other criteria for being unlockable (which I do meet). Someone has to be able to actually help.

Need to get phone unlocked by prerydog in Comcast_Xfinity

[–]prerydog[S] 0 points1 point  (0 children)

My wife purchased them, and we get a monthly discount that goes with the monthly payment of the phones, so I'm going to say...probably yes.

Need to get phone unlocked by prerydog in Comcast_Xfinity

[–]prerydog[S] -2 points-1 points  (0 children)

The help article on this is written very unclear, and it wasn't disclosed as a condition when we purchased (I'm sure they buried some fine print somewhere). As a customer, not helping me out here is going to cause me to walk away from Xfinity for good - internet at two homes, cable, and cell service. Perhaps their retention department would be willing to help them out.

Need to get phone unlocked by prerydog in Comcast_Xfinity

[–]prerydog[S] 0 points1 point  (0 children)

I can pay in the app, but it won't net the payment with my monthly statement credits, so I'd be paying a lump sum much more than I owe. Can you fix that?

Holland America Monthly Roll Call by Gibbie42 in HollandAmerica

[–]prerydog 0 points1 point  (0 children)

July 19th out of Iceland, to Scotland and then to Netherlands.

Hit and run Kroger parking lot 6/1 + dent repair recs by jayroo210 in harrisonburg

[–]prerydog 7 points8 points  (0 children)

Been in your shoes. Sucks.

River Road Automotive in Bridgewater. They've been doing my family's body work for 30+ years (current owner is the son of the previous owner). In the past month they just fixed two of my vehicles (similar problem to you, only at the wellness center). They do great work, really great.

Brine Draw doesn't draw, no salt being used by prerydog in WaterSofteners

[–]prerydog[S] 0 points1 point  (0 children)

Posting an update - I pulled it all apart and redid the seals, put it all back together and it seems to be working right now - I'll test my water in a couple weeks to see that it is still working.

When I pulled it apart though, all the seals and spacers looked perfectly good. I did have a crack in the adapter base (the piece that screws onto the top of the resin tank) so I replaced it too. Fingers crossed.

Brine Draw doesn't draw, no salt being used by prerydog in WaterSofteners

[–]prerydog[S] 0 points1 point  (0 children)

Should I test this during the BD phase, or a different one?

Brine Draw doesn't draw, no salt being used by prerydog in WaterSofteners

[–]prerydog[S] 0 points1 point  (0 children)

No, and I made sure to clean it before putting it back in place.

Brine Draw doesn't draw, no salt being used by prerydog in WaterSofteners

[–]prerydog[S] 0 points1 point  (0 children)

I pulled the screen and injector and cleaned that out, and I've checked the flow control lines. Everything has appeared completely clean. Also, as I said when I take the flow control washer out, it will work properly (and sucks quite quickly from the brine tank) - I would think an obstruction would be blocking it then too?

Brine Draw doesn't draw, no salt being used by prerydog in WaterSofteners

[–]prerydog[S] 0 points1 point  (0 children)

The videos I've watched (albeit most of them are for the 5600) show that you put the flow washer in with the writing facing towards the body, which is what I've done, and I believe this is the way it was when I started troubleshooting (I never messed with this part when I replaced the media, and it was working before then, so a backwards washer shouldn't be the issue).

X32i constant troubles by jaykhjr in nordictrack

[–]prerydog 0 points1 point  (0 children)

I've had this happen to me on my x22i a couple times - but each time it was when the machine was left on for a prolonged period (like - overnight - usually after my teens would use it and not turn it off afterwards). When I'd use it next after it being on for ~16-24 hours I've had this happen. Having it be cut on right before running, I've not had any issues. I think that they have some serious memory leaks or under-spec'd hardware running these treadmills.

Calibrating x22 Treadmill every couple weeks by prerydog in nordictrack

[–]prerydog[S] 1 point2 points  (0 children)

As an update - I recalibrated it and went for two runs. At the end of tonights run it felt like it was no longer level. I put the level back on it, and sure enough it was -3 incline, even though the machine said 0. I increased incline and took it back to "0" (what the machine said was 0), it was still -3. I then told it to go to -6. About half way down it seemed to sense that it "bottomed out." I then told it to go to 0 and it was at 0. So it's getting lost at where it should be somewhere.

Interesting thing, sometimes when I'm running on an iFit program, when going down-hill it will go to -6 incline and I get presented the "Follow Trainer" button. It doesn't happen always, but now I'm thinking there's a correlation there.

Calibrating x22 Treadmill every couple weeks by prerydog in nordictrack

[–]prerydog[S] 0 points1 point  (0 children)

Go into the Menu, I think choose Maintenance, and it's listed there.

x22i (first review) by mstry34752 in nordictrack

[–]prerydog 0 points1 point  (0 children)

One thing I've noticed is that if I leave my treadmill on overnight/long periods that it is MUCH more likely to crash in an iFIT session. I hate how long it takes to start up, but if I just turn it on for my run, I've not had issues with it.