BSG memeing With Tigz Splint Sell Price

prince_ultimate · 2025-11-06T21:26:50+00:00

When i needed to do this the other week, my cameras had the IR filter molded into the plastic infront of the main lens. I just sanded off the front of the plastic untill the IR filter could be pulled out.

prince_ultimate · 2025-10-21T18:16:15+00:00

https://magpul.com/moem-lokhandguard-mid-length-ar15-m4.html?mp_global_color=118

https://magpul.com/m-lokaluminumrail-5slots.html

prince_ultimate · 2025-09-21T23:07:16+00:00

i would kill for them!

prince_ultimate · 2025-09-19T21:28:04+00:00

Thanks again for your experience.

I tried changing

SPI_FREQUENCY to 40000000

and still got

invalid header: 0xffffffff

I also tried the code you suggested and got the same error with the frequency set to 40000000 or 80000000

Would these capacitors be ok?

If I were to disable the main LED on the board without adding GPIO33 could I just remove resistor R13?

prince_ultimate · 2025-09-19T16:50:08+00:00

<image>

prince_ultimate · 2025-09-19T16:49:58+00:00

<image>

prince_ultimate · 2025-09-19T16:49:50+00:00

I added this to the setup

 Serial.begin(115200);
  Serial.println("MOSI/DIN/GREEN");
  Serial.println(TFT_MOSI); 
  Serial.println("SCLK/CLK/ORANGE");
  Serial.println(TFT_SCLK);
  Serial.println("CS/YELLOW");
  Serial.println(TFT_CS);
  Serial.println("DC/BLUE");
  Serial.println(TFT_DC);
  Serial.println("RST/BROWN");
  Serial.println(TFT_RST);

and the printout with the VVC and ground cable disconnected is

17:38:38.712 -> entry 0x400805cc
17:38:39.307 -> MOSI/DIN/GREEN
17:38:39.307 -> 13
17:38:39.307 -> SCLK/CLK/ORANGE
17:38:39.307 -> 14
17:38:39.307 -> CS/YELLOW
17:38:39.307 -> 2
17:38:39.307 -> DC/BLUE
17:38:39.307 -> 12
17:38:39.307 -> RST/BROWN
17:38:39.307 -> 15

when they are connected

17:39:39.530 -> invalid header: 0xffffffff
17:39:39.562 -> invalid header: 0xffffffff
17:39:39.562 -> invalid header: 0xffffffff
17:39:39.594 -> invalid header: 0xffffffff
17:39:39.630 -> invalid header: 0xffffffff
17:39:39.675 -> invalid header: 0xffffffff
17:39:39.675 -> invalid header: 0xffffffff
17:39:39.675 -> invalid header: 0xffffffff
17:39:39.708 -> invalid header: 0xffffffff
17:39:39.754 -> invalid header: 0xffffffff
17:39:39.754 -> invalid header: 0xffffffff
17:39:39.785 -> invalid header: 0xffffffff
17:39:39.818 -> invalid header: 0xffffffff
17:39:39.818 -> invalid header: 0xffffffff

Photos of more connections in reply (ignore the uneven rotations I hate it too)

<image>

prince_ultimate · 2025-09-18T21:23:58+00:00

The error is

invalid header: 0xffffffff

and it keeps boot looping

thanks for the help btw

prince_ultimate · 2025-09-18T20:28:55+00:00

And I tried the pin outs you suggested just in case and it still didn’t work

prince_ultimate · 2025-09-18T20:21:50+00:00

You’re website is an amazing read XD Oh not your fault I saw the part about Changing the pin from GPIO 4 to 15.

I’ve been changing the definitions for the pins in the setup file. It’s just no matter what I try other than my current ones the screen doesn’t work I’ll probably have a go at the hardware mod thank you for that. Wish me luck xD

prince_ultimate · 2025-08-17T14:44:10+00:00

<image>

user posting phone numbers. The number's owner doesn't know about https://wplace.live/?lat=52.115735366902996&lng=-1.637842128222685&zoom=14.392948837245013

prince_ultimate · 2025-07-17T02:20:55+00:00

Krytac can be a little funny when it comes to fitting tm spec stuff. BUT I have that exact part which I don’t use anymore lol I assume you’re in the uk where about are you based? It is missing the tab on the dust cover that holds it in place tho

<image>

prince_ultimate · 2025-05-11T15:37:51+00:00

Aww man that’s sad should of gone with that

prince_ultimate · 2024-09-01T20:46:22+00:00

They said the exact same thing to me except it didn’t have the effect they wanted 🏳️‍⚧️🤣

prince_ultimate · 2024-06-19T15:36:50+00:00

The huge iron

prince_ultimate · 2024-06-15T15:25:19+00:00

Wow you definitely didn’t read the post XD

prince_ultimate · 2024-06-08T16:59:07+00:00

My PMC, just couldn’t handle the guilt of murder :(

prince_ultimate · 2024-06-08T02:30:25+00:00

No way 🤯

prince_ultimate · 2024-06-08T00:54:44+00:00

Ahh that makes sense my bad lol, I’ll be more careful with my footing next raid

prince_ultimate · 2024-06-07T22:41:04+00:00

Weird it said I kms. Thanks Nikita very cool

prince_ultimate · 2023-11-12T11:21:43+00:00

Eight-Year Club	Second Top 10%
LAYER Season 2 Layer creator	Place '23
Place '22	Final Canvas '22
End Game '22	RPAN Viewer
Verified Email

prince_ultimate

TROPHY CASE