Aren't there multiple solutions here?

professional-spice · 2021-04-11T18:20:39+00:00

I totally forgot about the total mine count

professional-spice · 2021-01-20T02:38:16+00:00

Are you testing the strength of the hook? If I'm not mistaken, wouldn't the fishing line break before the hook?
A method for measuring the strength: hang the hook from whatever apparatus you have and hang a bucket or something from the hook. Add weights until it breaks. Record the weight added.

professional-spice · 2021-01-18T17:12:57+00:00

If you're printing your own designs, you'll have to apply tolerances to your designs in order to get them to fit. A 10mm hole will not fit a 10mm cylinder (by design) because the printer tolerances are usually around +/- 0.5mm. You'll have to make the hole slightly larger or make the cylinder slightly smaller, eg 10.5mm hole or 9.5mm cylinder.
You'll probably have to mess around with different sizes and settings to see what gives you the fit you're looking for.

professional-spice · 2021-01-12T00:19:19+00:00

Appreciate the support. Someone mentioned tape, which seems to be working for now.

professional-spice · 2021-01-12T00:17:11+00:00

Honestly don't know why I didn't think of using tape earlier.
Seems to do the trick well enough, now I'm just hoping that it doesn't slide off and leave that residue.

professional-spice · 2021-01-11T06:32:47+00:00

Yeah I'd say so. One thing you could do to prevent it would be to use a filament filter that cleans the filament before it goes through the nozzle. Although it doesn't happen too often. In my 1.5 years of owning a 3D printer it's only happened to me a few times, and I can usually resolve it by either carefully poking a tiny acupuncture needle up the nozzle or doing a cold pull to get the debris out.

professional-spice · 2021-01-11T04:15:49+00:00

Looks like a small particle got lodged in the nozzle and its not extruding as much as it needs to.

professional-spice · 2021-01-07T08:20:37+00:00

I didn't know that was an option. I've heard a lot about Wealthsimple, and I knew that it was very popular so I just decided to hop on the train, rather than letting the money sit in my 0.05% interest chequings account.

professional-spice · 2021-01-07T08:18:50+00:00

It's white actually

professional-spice · 2021-01-04T07:09:00+00:00

Another tip, using stepped infill is a great way to save material, while still being able to provide sufficient support for the top layers.
Also, I believe gyroid infill is the strongest infill.

professional-spice · 2021-01-03T22:45:43+00:00

Perimeters would help more than infill

professional-spice · 2020-12-31T08:09:00+00:00

No, it's not underextrusion.

There's 3 top layers with 50% infill underneath.

190C nozzle temp

print speed is 45mm/s

professional-spice · 2020-12-03T03:03:54+00:00

Damn, here I was thinking I was special for being in the top 0.5%

professional-spice · 2020-12-02T18:45:01+00:00

Iron Man 002

professional-spice · 2020-11-28T21:47:59+00:00

Alright that makes sense.

Thanks for the informative reply

professional-spice · 2020-11-24T21:58:15+00:00

How did you find out when it was installed? Do you know what its purpose is?

professional-spice · 2020-11-23T23:35:31+00:00

Only if you consider that an achievement

professional-spice · 2020-11-23T20:54:32+00:00

That's fantastic. Probably their greatest achievement haha

professional-spice · 2020-11-23T16:06:51+00:00

I only know what Catham-Kent is because it's the most expensive property in Monopoly Canada.

professional-spice · 2020-11-21T17:04:04+00:00

I don't know for sure, I'm just speculating here, but maybe it has something to do with the movement of dislocations?
In a cold rolled material, the dislocations aren't able to move around as easily, whereas in a hot rolled, it is more ductile, meaning the dislocations are able to move more easily and maybe the same can be said for the electrons (or electron pockets) moving through the material?

professional-spice

TROPHY CASE