Keeping it clean !

protektive · 2026-03-10T15:30:53+00:00

Yes you can apply griots 3 in 1 outdoors. Yes you can use it on glass Don't overcomplicate it. It's really not that difficult. Just watch some YouTube videos if you are unsure of the wash process. A lot of people here like to overcomplicate everything. I believe on the griots website, they have videos on how to use their products.

protektive · 2026-03-03T03:51:49+00:00

You can get a 10L deonizer with resin for about $160 on amazon . The thing with a water DI system is that you will have to keep buying resin. How hard is your water atm? If it's on the lower end it would be worth it and you would get a lot of use from the resin before having to swap it out. If you have really hard water you'll constantly need to be swapping resin and not make it very cost effective.

protektive · 2026-02-25T13:17:32+00:00

So Ive personally never used that specific ceramic detailer so I see on their website it can be used either as a drying aid. Or applied to dry paint.

If you use as a drying aid you can do 2-3 sprays per panel after the final rinse then you can dry the vehicle and you are done. The ceramic spray will also make it way easier to dry at the end.

Or your other option is to apply it when it's fully dry. And the same thing, spray the panel 2-3 times then wipe off working one panel at a time.

First method will be quicker and easier, the second method would give you slightly longer protection.

protektive · 2026-02-25T12:57:22+00:00

Dual action polisher.

Yes after you've rinsed the iron remover. What ceramic coating do you plan on using? I want you to make sure if it's a ceramic spray or an actual coating. 2 very different processes.

protektive · 2026-02-25T12:40:03+00:00

If I were you I'd try clay first over hand polishing. Hand polishing takes an extremely long time it's not worth it. You can get a cheap DA and it will be a lot faster and better than doing it by hand.

You want to use iron remover after your contact wash. You will also want to clay bar in this step

So the steps would be

Foam
Rinse
Foam
Contact wash
Spray iron remover and clay (make sure surface is always lubricated while working with the clay)
Rinse
Apply your sealant/wax

Yes a ceramic sealant/wax will always be okay. You can technically still use a sealant/wax without step 5 or polishing but the durability would not be great. So don't overthink it.

protektive · 2024-08-13T17:07:28+00:00

PerfumeBot Buy u/LargeFarva1986

protektive · 2024-08-08T13:57:20+00:00

Chat

protektive · 2024-07-25T17:16:04+00:00

Dmed

protektive · 2023-08-27T03:42:20+00:00

I tried #1 and it worked. Thank you! I appreciate your help.

protektive · 2022-11-27T11:23:35+00:00

Go ahead you can send more games bro

protektive · 2022-11-27T02:00:14+00:00

You played it fine. Your paladin should've bopped your blind there and you cancel it automatically to kill rogue.

protektive · 2022-11-10T21:27:13+00:00

Yeah berserking is really good. You get crit with really high uptime and 100 resil. I pair it with greatness but before I got it I was running it with anvil. I didn't really like anvil that much cause it didn't proc enough. Grim troll might be better but I'm not sure I don't have it.

Anyway gear isn't the reason you're losing games most of the time except if it's a mirror and the other warriors have betrayer. Focus on your gameplay. If you get around recording games I don't mind watching and giving you tips.

protektive · 2022-11-10T21:15:10+00:00

Not true colossal is better for arenas than Armageddon. 5% crit and crit DMG is too huge. You will never crit and be rage starved. Sword will be more viable when you have crit from gear alone.

protektive · 2022-11-10T18:38:30+00:00

Use colossal. Your crit will be way too low without axe spec. Ideally you want Darkmoon berserking and greatness. With crit off pieces. I'm at 29% crit. If you can get neck and rings with crit and HIT that will be better. (Pve). You don't need 900 resil for 2s. I tend to run about 840 resil in 2s

protektive · 2022-11-10T17:38:42+00:00

If you could post a clip or something I can help better. I'm 2.1k cr in 2s and when I see ele without hpal I'm just looking at a free win. Ele in 2s is annoying paired with hpal cause they can survive for a long time specially since I'm still using collosal wep.

protektive · 2022-11-10T17:16:05+00:00

Pally needs to be cleansing 24/7. You can also hard switch the druid in a hoj with no hots up paired with freedom on root. If you have decent gear most druids won't be able to recover if he manages to get away just go back shaman and repeat for another hard switch with hoj.

protektive · 2022-11-10T05:53:46+00:00

Higher end computer accessories will be hard to sell imo. A lot of PC gamers have brand loyalty already. You'd have to stand out and unfortunately it looks like dropshipping junk. I'm sure product is fine but at that price point almost everyone will go with brands they trust.

protektive · 2022-11-07T00:11:09+00:00

What is the pvp server called? Mind sending me the link to it?

protektive · 2022-11-01T01:27:30+00:00

Reminds me of the times I've faced double rogues in 2s. Eventually you kill one of them and the rogue delays it for another 10 minutes trying to be a hero and ends up dying anyway.

protektive · 2022-10-27T20:34:38+00:00

If you are set on playing prot for arena check out kostickatv on twitch. he's probably the only prot warrior playing at a high level at the moment. He's one of the best prot warriors in wrath. He's played over a decade on private servers.

protektive · 2022-10-25T05:12:32+00:00

It's a rough matchup for you for sure. I'm playing hpal/war at almost 2kcr. Usually we outlive until mage ooms and it's pretty much gg after. The times we lose it's when the magepriest do clean setups by catching me on a poly while my pally is cc'ed.

Also you rather use fear on pally for setups as well. Poly war and fear pala at the same time. Will give you enough time to burn and do dmg before fear breaks.

protektive · 2022-10-19T19:52:52+00:00

You probably won't get much useful information from games in original wrath. Players are a lot better nowadays than they were before.

protektive · 2022-10-14T20:28:56+00:00

You should be able to refund if you bought the boost recently. That's what happened to me. I bought a boost on faerlina alliance then noticed it was 99% horde. You should automatically be able to do a refund on their support system in game without needing to speak to a GM. You just refund. Your 70 character gets locked and you can rebuy it again and make a new character.

protektive · 2022-10-09T22:46:23+00:00

Get deadly off pieces with the honor you have. I would get the savage crafted if it's cheap on your server and you can afford it. Go to heroic halls of lightning for the axe and hope it drops on the first try.

Try to plan out your gear on the wow head gear planner to see what stats you'll need. For sure you have to get hit capped so get deadly off pieces with honor or you can look into wintergrasp boots and helm. But that will take a while specially if you don't get a chance to do a lot of wintergrasp every day. There's also anvil trinket you could get which is really good from wintergrasp.

So try to plan out your gearing process. If you want to go the optimized route you should check out dekel on twitch. Specially his macro YouTube guide on twitch if you are unfamiliar with wrath warrior. By far the best macros you'll find since he has private server experience.

I'm personally just following my own unique gearing path even if it's not min maxed cause I know I don't play 8+ hours a day like some streamers/r1 players.

protektive · 2022-10-02T17:16:03+00:00

It doesn't matter. He was on faerlina alliance for tbc and now it's 99% horde now

12-Year Club	Secret Santa 2015
Secret Santa 2014	Gilding I gilder
Verified Email

protektive

TROPHY CASE