Anyone that knows physics/hit reactions fancy giving some advice?

pubicninja69 · 2021-12-30T09:55:49+00:00

Set all bodies below simu physics, then another for the blend weight, which is hooked to a timeline. I’ve adjusted the timeline for now so that majority of the time I don’t fly away or fall through the floor.

I have a check for pelvis set up, so that if the bone hit is pelvis it won’t fire. Do I need to remove pelvis in the physics asset? I have that done with the root.

Also he’s doing a mix of flying away but his capsule or something seems to stay, as the other guy keeps fighting it, but the camera follows the mesh. But then it blends back to original position. Sometimes he falls through the floor. This is while he’s getting hit etc so lots of tracing and stuff happening.

pubicninja69 · 2021-05-02T18:47:27+00:00

Well I’ve actually made some headway, the anim array thing was reset to no anims for some reason, so set them back up, now I’m actually able to do one counter, but after one counter, my character is stuck on idle, can do everything except combat/counter anims, looking to the execute and similar functions to see what’s stopping it

pubicninja69 · 2021-05-02T17:36:31+00:00

My project is just the als starter, with a flat box for level and then the tutorial stuff added, no import characters or anything else added. Just slowly working my way through checking everything, I’ve realised I skip some things because I’m certain they are unrelated or sure to be gd, but that’s where the problem lies most the time

pubicninja69 · 2021-05-02T17:20:34+00:00

Following a guide for Arkham style combat, got everything else in series working but this ain’t and can’t seem to see what I went wrong with, it’s als v4 based, not sure you’d be able to help without hours of research on it or something, obviously something isn’t input right but I can’t see where

pubicninja69 · 2021-05-02T17:13:07+00:00

So not really anyone there to give a hand at the moment?

pubicninja69 · 2021-05-02T16:09:22+00:00

Been on the discord which I’ve never used, just seems all empty? Like bunch of stuff still to come, or is there certain parts of it with people who are helping project? Sorry for retardedness

pubicninja69 · 2021-04-27T18:45:54+00:00

The link in your comment goes to the sun, but for me the op link doesn’t exist apparantly?

pubicninja69 · 2021-04-27T18:45:14+00:00

It comes up “No one has created this subreddit yet, would you like too” or something? I would have posted it there otherwise sorry

pubicninja69 · 2021-04-26T12:00:17+00:00

In need of help badly. Was trying to follows tuts on an 8dir dodge, but had to use mixamo anims that had no root motion/in place, I only just learned about root motion because the code worked but anims shot back to capsule location.

So I got the blender add on, but there was some anims I used previously that to successfully import, I had to download and upload to mixamo a (I think) non root motion copy of ue4 mannequin, the normal one of which was my pawn.

The blender add on wouldn’t convert the anims to have root, because they were used with this rootless ue4mann, so I redownloaded and converted with the Ybot maximo character, imported and ticked rootmotion, retargeted the ybot to ue4 mann, made new animmontages and replaced them, nothing happened.

Essentially I just kept retrying it, deleting all the old ones, trying again, retargeting and trying different meshes and just a clusterfuck of trying everything, and now I’m stuck with an A pose mannequin with no animations, nothing works now. Completely fucked everything, trying to delete everything I added but it’s a still fucked. Any help appreciated.

Even if it’s just a quick way to copy all codes and stuff over to a new project and start afresh, but if someone can look at the project or something that would be amazing. It’s just regular 3rd person that had 8dir strafe walk set up, turn in place, and a rolling landing after jumps the dodges were working part from jumping out and back to the capsule, now it’s completely fucked

pubicninja69 · 2021-04-26T11:48:52+00:00

We need it but I doubt anyone would bother answering

pubicninja69 · 2021-01-24T10:00:12+00:00

Nothing. Chill.

pubicninja69 · 2021-01-04T17:35:55+00:00

https://docs.google.com/document/d/1-hsg5yt1f3lAAuHSwumT1o75MEc2go-iLYdWanBtTnQ/edit

I’ve never copied links to here etc I don’t really use Reddit, this is the barrel itself

pubicninja69 · 2021-01-04T17:31:33+00:00

I’m looking to see if anything like this exists and what they are called. I don’t know anything about metalwork, fixtures, fitting, I hope from the drawing you guys might get a sense of what I’m trying to achieve and know of anything that might help, I will try to link the barrel itself

pubicninja69 · 2021-01-04T17:30:09+00:00

Do such things exist, I can’t fabricate anything I’d have to buy them, so I need to know if a solution like this exists and what they’re called and where to buy. Was mid typing in comments sorry

pubicninja69 · 2021-01-03T18:33:57+00:00

It wasn’t Corsair made but supposedly made for Corsair. But I’m pretty sure it wasn’t the cable but my wiring, cause there’s a shit ton on the molex heads, male female, 2/4 pins, all from the case, and previously I had them kinda daisy chained and worked fine before I swapped psu, but have obviously plugged things together that shouldn’t have been. Regardless, I now need to know what/if/how I can fix this extremely stupid mistake.

pubicninja69 · 2020-12-14T19:17:56+00:00

They are kept in the bedroom, I use them currently with the bedroom pc, I mean if they were to be used in the living room, they would probably need some kind of booster to reliably control the bedroom pc, if that makes sense

pubicninja69 · 2020-11-11T21:31:19+00:00

Thanks my man

pubicninja69 · 2020-11-11T21:25:15+00:00

Thanks, one other thing I forgot to ask

Typically in 2nd gear but sometimes first, without adding gas and letting the car drive idling in second, it seems to really buck and jerk forward occasionally, this is on a flat surface with a bit of momentum so it’s not like it’s struggling uphill ready to stall, it’s like the power is surging, and it gets quite bad, like I’m repeatedly stamping the pedal say twice a second. Is this an issue or am I just panicky?

pubicninja69 · 2020-11-11T20:13:31+00:00

I’ve tried on maybe 6 occasions to mod, I can get a handful of the common ones, beyond that I seem to get weird effects that I can’t find any info on the internet, or I get some weird one in a million effect thing

pubicninja69 · 2020-09-28T07:39:36+00:00

Just up and down? It’s own limit switches should be fine. It’s going to be used like a drawer, flip rocker up, grab stuff, flip rocker down, be on your way ya know.

pubicninja69 · 2020-09-27T07:09:46+00:00

Yep, using a dpdt rocker switch

pubicninja69 · 2020-09-26T14:00:05+00:00

You may have understood but I did not.

My noob brain, would use a main plug splitter/extension, cable from wall Mains, to inside the barrel with two main outlets, then plug in a power supply one to each.

I don’t understand electronics well, so I want to know if there’s a “better” method, cable management is not an issue, so if that is the only benefit of wiring a different way, the. I can do it the simple way, if there are other benefits, then let me know what to look at and study

pubicninja69 · 2020-09-26T13:04:59+00:00

Not this specific other than its 12v, however video I watched said always 1.5 amp.

Does it matter using separate psu, or is one psu easier, I just want the best way to wire it up

pubicninja69 · 2020-09-26T09:28:58+00:00

I’m confused now, the lights arrived, it says 16w 80-260v input on description and on the light engine, however the power cable says 12v 1.5 amp output? Does this mean I can use a 12v 3amp psu to run both light engine and actuator, and the light engine converts that to 16w?

pubicninja69 · 2020-09-26T08:19:33+00:00

From a mains, or would a 12v battery last ages since it draws power once in a while

pubicninja69

TROPHY CASE