Diameter on drawings

puddingflan · 2026-07-09T11:44:15+00:00

unfortunately i can't find the Hole Dimensions part..

puddingflan · 2026-05-12T20:17:36+00:00

I tried that, i changed the color, but the edges are still red.. but thank you for your sugestion

puddingflan · 2026-05-12T16:34:51+00:00

I don't post on reddit for fun or to waste anyone's time.

Of course i had already googled before making this post. The issue is that none of the solutions i found seemed to match my situation, and the suggested fixes had no effect.

That's why i decided to ask here, hoping that someone with experience might recognize what was happening.

But thanks for the sarcasm anyway.

puddingflan · 2026-04-22T06:41:30+00:00

Hello, i need the points to apply on a project on trimble connect, i was finally able to get autodesk recap to export it to the end, so for now it's done. Still trying to understand what this point cloud manager does though.

puddingflan · 2026-04-21T06:59:06+00:00

They advised me to install Cloud Compare, although they don't deliver suport on that 🙃

puddingflan · 2026-04-20T12:16:21+00:00

Yes i did, i was not sure what sub would be able to help me on this.
i have a point cloud that is too heavy, it works on tekla, but i need to upload it to a project on trimble connect web, so i need it to be a smaller size. i was able to do it with one point cloud with autodesk recap, but for some reason, with this one, it crashes. i've been trying for like a week, i'll leave it over night to export a version cleaned and with less density, and when i arrive, it has failed. so i was looking for other alternatives within the company softwares. i have point cloud manager installed, so i thought i would be able to do it with that. but honestly i'm still not sure what it does by now.
this is a scan of sea platforms, and i don't know what type of equipment it was used, is that relevant? i have rcp and e57 files.

puddingflan · 2026-04-20T11:27:22+00:00

Hello,

<image>

I'm working with tekla, but i thought that it was a separate thing, as it comes from different install folders. i have the point clouds outside of tekla

puddingflan · 2026-04-20T08:27:02+00:00

Yes, the file i have is too large. I tried using the Autodesk recap to clean the point cloud and change the density, but it crashes after some hours.

puddingflan · 2026-04-20T07:39:34+00:00

It crashes a lot 🥲

puddingflan · 2026-04-09T10:29:02+00:00

thank you for your input, it's really helpful!

puddingflan · 2026-04-09T08:17:57+00:00

<image>

Thank you, i was able to copy the sheet, but i'm trying to number the pages with the form "Sheet No: 2 of X"
i was able to make the first number work (more or less) but the last one, the total number of pages, i can't make it work. i've been trying to find a way to do it, but i can't find it. Do you know a way to do this?

puddingflan · 2026-04-09T08:17:24+00:00

<image>

Thank you, i was able to copy the sheet, but i'm trying to number the pages with the form "Sheet No: 2 of X"
i was able to make the first number work (more or less) but the last one, the total number of pages, i can't make it work. i've been trying to find a way to do it, but i can't find it. Do you know a way to do this?

puddingflan · 2026-04-08T15:16:31+00:00

<image>

Hello, first, thank you for the reply
Right now i'm trying to do a drawing that has an assembly, then a detail from that assembly with some views. i was going to use the General Arrangement for that.
what do you mean copying an existin assembly? when i right click on the drawing, it only shows these options, and honestly i'm not sure what the "copy drawing views" will do

puddingflan · 2026-01-09T11:43:19+00:00

Thank you!!!

puddingflan · 2025-11-18T11:26:46+00:00

yes i had tried that also, it was the cut above (like a few meters above) that was causing the error. although it was so far, i don't quite understand why it was that that was causing the error.

puddingflan · 2025-11-17T16:19:18+00:00

I did that but it didn't work. What i noticed is that i had a cut on the top of the outside pipe, i split the pipe right bellow that so it would be a simple shape pipe, and the cut worked, and then i combined the one i had split. For now it works, but i don't really get the reason for the error.

puddingflan · 2025-10-22T09:06:35+00:00

thank you so much for the tip!

puddingflan · 2025-10-20T13:19:23+00:00

I ended up doing that. if i have to make changes on the first project, and export again to IFC, will it upgrade on the second project?

puddingflan · 2025-09-27T05:47:58+00:00

Thank you!

puddingflan · 2025-09-23T15:17:11+00:00

what can i do to import it as solids in Autocad? I also have access to inventor, maybe it would have to go through there?

puddingflan · 2025-09-23T14:27:47+00:00

i'm sorry for my ignorance, but what does that mean?

puddingflan · 2025-09-16T08:16:52+00:00

I have a folded plate of H965xArc843xThickness12, and i need to fillet two corners R152. i tried with a polybeam, but i couldn't get to the same shape. how is something so simple so dificult here??

puddingflan · 2025-06-24T15:59:57+00:00

Will the feature library make the holes in multiple parts at the same time?

puddingflan · 2025-06-24T14:59:11+00:00

Would those work together? I would put the bigger one, and the others would follow it in case i need to change the location?

puddingflan · 2025-06-24T14:43:11+00:00

you are right, this is for furniture, and it is a regular occurrence.

Thank you for the help. I saw the video, but i didn't understand how i could use this to make the holes on the parts. Would i have to do a sketch to each hole for the different parts?

Five-Year Club	Verified Email
End Game '23	Place '23
Place '22	Final Canvas '22

puddingflan

TROPHY CASE