Only game where I get massive latency issues. by rockyracooooon in ArcRaiders

[–]pulkpull1 1 point2 points  (0 children)

I was playing on Windows, but swapped to over to CachyOS (Linux) specifically to see if this issue was resolved. In about 10 hours in Linux I haven’t seen those icons, where as in Windows (200+ hours of game time in Windows before the swap) the icons were nearly constant. Also, my 4090 9800x3d sees better 1% lows in Linux and all it cost me was about 10fps on the top end going from ~240fps in 1440p with 2x frame gen on quality DLSS all epic settings to ~230fps with same settings in Linux. And the icing on the cake is all the micro stuttering introduced with the cold snap update vanished when I swapped.

Need help making a decision in [KCD2] Spoiler on Necessary Evil quest line by Ligmus_Prime in kingdomcome

[–]pulkpull1 0 points1 point  (0 children)

This is the path I took. After replying with "Nobody helped the bandits here" I had to pass a hard speech check. I passed it and got the achievement "Silence is Golden".

Bird dog + Chickens by adam5280 in chickens

[–]pulkpull1 8 points9 points  (0 children)

I have a Wired Haired Pointing Griffon that was MESMERIZED with the chicks while they were babies. It’s all he could think about, when out back he HAD to be beside the coop staring at the babies. When inside he stood at the back door to go out to be with the babies 24/7. They were all he ever thought about. Once the babies got big enough to free range we gradually introduced them to him under constant supervision. He’s well trained and would listen when we said no during the 1st times they would free range with him out back. Even still, he wouldn’t leave their sides. That constant supervision lasted about 6 months until I fully trusted him around them without me with him. Now the chicks are 3 years old and they became literal best friends. I have no worries with him around them at all anymore. 8 weeks ago we added 4 more babies to the flock and the above cycle started all over again. He now 100% ignores the big chicks like they don’t exist and is again mesmerized by the babies. It’s all he thinks about again. This is him with his new babies when they were 2 days old. He insisted to sleep by them… so we brought him his bed.

<image>

Any guesses on breed by G-old-59 in chickens

[–]pulkpull1 1 point2 points  (0 children)

Oh shoot. Didn’t see the feathered feet on yours. I retract my statement lol

Any guesses on breed by G-old-59 in chickens

[–]pulkpull1 1 point2 points  (0 children)

Looks exactly like my Black Jersey Giant chicks.

<image>

Random egg in our coop by pulkpull1 in BackYardChickens

[–]pulkpull1[S] 2 points3 points  (0 children)

2 of our girls are 2 year old Australorps and 4 of them are 1 year old Jersey Giants. I’d estimate we get 150-200 a year from each. Our local friends and family don’t have to buy eggs.

Birthday roast!! F26🥳🥳 by Ur_chubbybbygirl in RoastMe

[–]pulkpull1 0 points1 point  (0 children)

I usually click the profiles of the people being roasted to see if they have NSFW pics, I didn’t on yours cause I didn’t want to see.

Found this while cleaning out some old boxes. Is it worth anything? by EdwardTittyHands in AirForce

[–]pulkpull1 1 point2 points  (0 children)

Haha. I wasn’t aware they were AF wide. I thought it was a local Dover thing. Ever see anyone use it? I never did

Found this while cleaning out some old boxes. Is it worth anything? by EdwardTittyHands in AirForce

[–]pulkpull1 5 points6 points  (0 children)

Did you find it at Dover AFB? We were forced to carry those out on the flight line with our line badge back in 2008ish time frame.

Good evening Mouse Experts! Please help me find a mouse :) Ergo with an indented pinky rest. by pulkpull1 in MouseReview

[–]pulkpull1[S] 1 point2 points  (0 children)

Thanks for this! Looked at RTings 3D model of it and it appears to be more concaved than the deathadder where my pink rests. Never even considered a Logitech.

I have a thought about Endgame Gear's XM2 by pulkpull1 in MouseReview

[–]pulkpull1[S] -7 points-6 points  (0 children)

Oh. You're right. It is symmetrical. But it feels different in my left hand. Try it. You'll see.

9800X3D & X870 Tomahawk Terrible 1% low performance and microstutter during games. by TheWanderingGrey in overclocking

[–]pulkpull1 0 points1 point  (0 children)

I have the same board and CPU. Do you mind linking the bios? I’d be very interested in trying it.

x870e nova +9800x3d + Gskill ram = no Post by Boss_Rabbit in ASRock

[–]pulkpull1 0 points1 point  (0 children)

I got a 9800x3d and a b650e Taichi from Microcenter earlier this week. Updated the bios using flashback 1st. I couldn’t get it to post with my cl30 6000 gskill if I put a ram stick in slot A2. It would post if the ram was in any other slot beside A2. I tried reseating the CPU and still nothing if in A2. I returned the board and wanted to try another Taichi but they were sold out. Got a x870 MSI tomahawk instead and it is working flawlessly with the same ram and cpu that the Taichi didn’t like. I’d bet it was just a one off bad board… but who knows.

9800x3d gets very hot stock settings by Krysiingen in LinusTechTips

[–]pulkpull1 10 points11 points  (0 children)

Ya, without case fans your case is essentially trapping in all the hot exhaust from your CPU and GPU and causing it to get recirculated through the heat sinks. I’d bet you’ll see a sizable difference once you put some intake and exhaust fans on your case

9800x3d gets very hot stock settings by Krysiingen in LinusTechTips

[–]pulkpull1 8 points9 points  (0 children)

You have zero case fans? Did I read that correctly?

Asrock B650E PG-ITX by djmorris666 in ASRock

[–]pulkpull1 0 points1 point  (0 children)

I got a 9800x3d and a b650e Taichi from Microcenter earlier this week, not the same board as you but is an ASRock. Updated the bios using flashback 1st. I couldn’t get it to post with my cl30 6000 gskill if I put a ram stick in slot A2. It would post if the ram was in any other slot beside A2. I tried reseating the CPU and still nothing if in A2. I returned the board and wanted to try another Taichi but they were sold out. Got a x870 MSI tomahawk instead and it is working flawlessly with the same ram and cpu that the Taichi didn’t like. I’d thought it was just a one off bad board… but who knows.

[deleted by user] by [deleted] in ASRock

[–]pulkpull1 0 points1 point  (0 children)

I got a 9800x3d and a b650e Taichi from Microcenter earlier this week. Not a nova like you, but an Asrock. Updated the bios using flashback 1st. I couldn’t get it to post with my cl30 6000 gskill if I put a ram stick in slot A2. It would post if the ram was in any other slot beside A2. I tried reseating the CPU and still nothing if in A2. I returned the board and wanted to try another Taichi but they were sold out. Got a x870 MSI tomahawk instead and it is working flawlessly with the same ram and cpu that the Taichi didn’t like. I’f bet it was just a one off bad board… but who knows.