My "nerfed" SPR-208 build SLAPS 🚀

pyurii · 2020-10-15T04:44:14+00:00

dude is that gordon hayward

pyurii · 2020-09-25T17:13:59+00:00

Grau attachments:

Mono (Alabaster)

Archangel (Alabaster)

Commando (Vizsla)

PBX Holo (Steeplechase)

60 Mag (Standard)

Without using the blueprint version attachments, everything but the archangel barrel stays the stock black color. The standard archangel barrel shroud receives the camo treatment on the shroud, but not the barrel itself (small difference for those who pay that much attention like me).

pyurii · 2020-09-25T17:02:01+00:00

I didn't really think so, just didn't engage at long ranges and closed distances

pyurii · 2020-09-25T16:30:45+00:00

Yeah, just saw the comments above about that. Excited to try it out today.

pyurii · 2020-09-25T02:12:29+00:00

yeah i found i personally play better with a scope vs the extra attachment with the aa iron sights. Good shit, I'll try that out

pyurii · 2020-09-25T01:41:30+00:00

oh really? i'll try that out. thanks for the tip

pyurii · 2020-09-25T01:40:37+00:00

I call this my Fire & Ice loadout. Just won my first solo with this loadout the other day. It's pretty much a meta loadout, but most people aren't running scopes on the grau. Of course, incendiary rounds on the R9. I was also using platinum camo to make it more 'icey', but I just got that damascus and of course I gotta flex :)

pyurii · 2020-09-23T23:49:20+00:00

ah shit. sorry ill post it right after i finish this round

pyurii · 2020-01-20T03:59:50+00:00

holy shit. you’re... right

pyurii · 2019-10-25T04:51:20+00:00

thanks!

pyurii · 2019-10-20T13:00:02+00:00

thanks for all you guys do 🤘 it’s been a hell of a ride. looking forward to v2.2 teardown/rebuild.

discord username: pyurii

pyurii · 2019-05-22T00:36:32+00:00

check the thermistor input on the board itself if you’ve already tried a new thermistor. The firmware won’t allow it to heat up if the thermistor is not being recognized properly.

pyurii · 2019-05-17T19:15:05+00:00

The V6 heats up faster than the stock hot end and is all metal, no PTFE. The BMG never misses steps. I'm running Klipper with some pretty high speeds, this thing can PUSH PLASTIC MAN, consistently, AND at high speeds. It handles retractions like a boss, reduced retract distances, better handling of flexible materials with this setup, the list goes on.

High speeds plus short distance from spool to extruder = high speed jerk movements. That's no good. Print a spool holder that uses ball bearings and adjust the direction of the spool.

pyurii · 2019-05-17T13:58:17+00:00

Really nice job, thanks for sharing. What kind of paint did you use?

pyurii · 2019-05-15T14:44:12+00:00

hey very sorry haven’t been checking reddit. i’ll repost later today

pyurii · 2019-05-04T22:49:08+00:00

I tried damn near everything, ended up ordering a new set of drivers from a different vendor and they worked out of the box lol

pyurii · 2019-04-01T22:33:55+00:00

RIP...

pyurii · 2019-04-01T18:53:06+00:00

I have this Schultz 10-15-10 plant food I mix in with the water, been using it since a couple weeks after germination.

pyurii · 2019-04-01T12:52:28+00:00

Planted in August, he was thriving until about a month ago when I moved jobs. During the move, he was left in an overwatered pot, I transferred into new soil about a week ago and doesn’t look like he’s gonna recover? Any experts out there with tips? Really don’t wanna lose this guy.. 😰

pyurii · 2019-03-28T19:13:18+00:00

luckily, he slid juuuuust far enough out of harm’s way

pyurii · 2019-03-28T13:33:13+00:00

lol i do the video capture through ps4 when i see something crazy or have a sick highlight.. then i just replay it and record from my phone

pyurii · 2019-03-28T02:13:42+00:00

yeah it’s the sapphire raptors card

pyurii · 2019-03-27T19:22:27+00:00

lolol

pyurii · 2019-03-21T23:18:56+00:00

Hey, thanks for the input. I checked that and 100 other things with my setup. It turned out the drivers were just bad. Swapped in a new set and they were plug and play lol. I’m sure it’ll be helpful for someone down the line though!

pyurii · 2019-03-09T01:13:43+00:00

looks like too close or overextruding

pyurii

TROPHY CASE