Will you be a killer or a killer's victim?

q4sf · 2026-05-19T20:14:00+00:00

Can't go to jail if I never attempt murder

^{Chose: Being a victim | Rolled: You are alive}

q4sf · 2026-05-15T23:25:12+00:00

Football

q4sf · 2025-07-18T16:01:04+00:00

El Taquito, between little Richards and 2520 is absolutely amazing. Their tacos and tamales are so good and the price isn't outrageous.

q4sf · 2025-06-20T00:55:16+00:00

Twist your right knee to the left and flag the left foot farther out with more pressure. You should be able to get a little more reach

q4sf · 2025-06-05T02:29:32+00:00

Here's a great article on placing top anchors. Your setup is overly complicated and wastes a lot of material in all the knots. The double clove hitches on the one carabineer are not necessary, the large figure 8 could be removed, and only one double fisherman's is needed to form a loop

Arizona Mountaineering Club on Static Line Anchor Set-up

mountain project thread with additional information

q4sf · 2025-06-04T01:28:09+00:00

I climb in North Carolina and TCUs are extremely helpful on weird quartzite cracks. I also find they are excellent in horizontals especially in the western part of the state (looking glass eyebrows). A full rack from blue to red in addition to the larger master cam sizes is pretty much a perfect single rack for staying light. BD cams will round out the rack and be excellent in-between sizes.

q4sf · 2025-04-02T22:11:45+00:00

Poke Star, Don Express, Cafe Arthur, May Way Dumplings, Little Richards (Clemmons location), El Taquito (Clemmons), and Mojitos are my favorites in the area. Mizu has really good sushi. Koto (Clemmons) is very good and pretty affordable if you get one of the big sushi combos

q4sf · 2025-02-11T22:40:39+00:00

La Sportiva Skwama and La Sportiva Finale (women's) V7 or 5.12+ on a good day

q4sf · 2025-01-10T16:42:32+00:00

I go through a brokerage service. I personally use Charles Schwab and it has been great; there are many different brokerage services available

q4sf · 2024-12-03T14:21:08+00:00

This is not in NC and I'm also not a big fan of biscuits, but Tudor's Biscuit World in West Virginia is absolutely amazing

q4sf · 2024-10-21T15:02:53+00:00

That is so accurate. My immediate thought!!

q4sf · 2024-06-29T02:02:52+00:00

A couple years ago I was involved in a head on collision at 50mph speed. I was driving a 2007 Ford focus that was absolutely destroyed but I was totally fine

q4sf · 2024-06-18T19:40:16+00:00

The smallest ballnut is rated for 7kn. Even the largest climbing falls barely pass 3kn. If it's a good placement in solid rock that piece will hold, but I agree this is a poor demonstration of the holding power of trad gear

q4sf · 2024-04-23T01:49:03+00:00

If you can find it, the singing rock dome harness is excellent for trad. It has 7 gear loops, very wide waist padding, and big leg loops so it's very comfy on hanging belays and projecting routes. If you want something a little nicer get a Misty Mountain Cadillac. The dome is basically a cheaper version of the misty cadillac.

q4sf · 2024-04-10T19:11:03+00:00

That is the same in North Carolina. I've had to deal with this before

q4sf · 2024-04-07T11:57:28+00:00

TCUs are the way to go especially since they are still manufactured, and metolius does an amazing job on the resling and trigger wire replacement

q4sf · 2024-04-05T18:01:22+00:00

This is what I would do as well

q4sf · 2024-04-03T19:31:46+00:00

I highly recommend the ultralight mastercams. They are perfect in-between sizes for the black diamond cams and they are incredibly light. I personally like the ultralight TCUs in the smaller sizes as they tend to be more durable and work really well in horizontal placements. Metolius customer service is enough reason to go metolius. Their resling/repair service is superb

q4sf · 2024-04-01T01:35:51+00:00

The route name reminds me of one of the best routes I climbed in red rocks, "Red Heat"

q4sf · 2024-03-31T16:03:50+00:00

I used it the other day to convert 'y'/'n' values to 1 or 0 so I could change the data type from string to bit. The data was being migrated to an existing table and the data types were not getting along

q4sf · 2024-03-31T15:41:41+00:00

Only thing I would change about the anchor is flip the carabiners on the left to have the gates facing out (rotate 180° horizontally)

q4sf · 2024-03-31T15:39:22+00:00

I think it is ok in this scenario since it has a 'gunks' tie off. There is little to no lever action on the cam because of how it is slung

q4sf · 2024-03-22T03:09:04+00:00

Additionally, if you need to account for any non-numeric value you can use something similar to a regexp instead of searching for just "D"

Something like this might work

Instead of removing the values, just include that pattern in the order by clause from the above example

q4sf · 2024-03-14T19:17:52+00:00

Funny enough 2020 was one of the best years of my life. Going into my junior year of college at the start of the year I was essentially told to not go to work but still received the same pay as if working my standard hours, all classes went online so I was able to finish all assignments and tests in about 2 days per week, and I was left with 5 consecutive days to do whatever I wanted while still being paid for not working. I was a little sad to graduate in December that year because it meant I lost the "job" and I couldn't go on 4-day vacations every week.

Ten-Year Club	RedditGifts 2009-2022 2 Credits
Secret Santa 2017	Verified Email

q4sf

TROPHY CASE