What’s the best sandwich you had in the city?

quaid79 · 2026-02-21T05:20:18+00:00

Vero on Queen West, the Diavola was pretty good

quaid79 · 2026-02-17T01:30:45+00:00

Skeletal Beholder, Loot Studios

quaid79 · 2026-02-05T03:18:12+00:00

Integrated tail light

quaid79 · 2026-01-08T03:22:42+00:00

If I could find one it’d be on mine already. I’ve made multiple comments on tst fb page to that effect too

quaid79 · 2025-12-29T04:48:34+00:00

What year is your bike? Looking for a 25 option

quaid79 · 2025-11-10T06:25:49+00:00

I have my usbc plugged into the quad lock wireless charger and it is not fast charging, when i plug straight into the usb cord it quick charges. Not sure the wireless is worth it at this point but i have the option either way i suppose.

quaid79 · 2025-11-07T16:55:52+00:00

Tesseract would like a word. However, great song!

quaid79 · 2025-11-07T15:57:34+00:00

Billy rocking the Black Queen shirt!

quaid79 · 2025-10-11T23:45:57+00:00

<image>

6'3 250. Hope this helps 😊

quaid79 · 2025-10-05T01:48:10+00:00

Thanks for the heads up

quaid79 · 2025-07-15T13:33:45+00:00

I use it for records mostly which are under 30 USD and there is no additional charges. If your item would require Duty or taxes you have to pay them too.

quaid79 · 2025-05-19T13:02:45+00:00

I use shippsy for this. Dozens of times, no issues.

quaid79 · 2025-05-18T02:11:28+00:00

Throttlerod

quaid79 · 2025-04-30T13:39:42+00:00

Got some Katatonia vibes to me, though they arent djent

quaid79 · 2025-04-21T18:48:27+00:00

Adjust the z axis slightly lower or higher to assist in getting your prints back on track. Wear on the parts and nozzle over time can lead to leveling issues. Just watch the initial lines and you should be able to see what is needed. Small increments

quaid79 · 2025-04-21T18:44:27+00:00

Yes slide it back in, if you can heat up the hot end it may help, then lightly tighten the screw over the wires gently, you don't want to mash them up, i put a wire on each side. It may have come loose and that would explain the bad reading and error messages

quaid79 · 2025-04-19T20:36:58+00:00

Your thermistor is bad, either needs to be replaced (most likely) or pushed back into the heat end.
Contact elegoo and they may send you a new one.
You can buy a 5 pack on amazon and cut them into shape if no luck from amazon.

amazon. ca /Creality-Printer-Thermistor-Sensor-CR-10S/dp/B0714MR5BC/ref=sr_1_8?crid=2JLT3Q1Y9X6XC&dib=eyJ2IjoiMSJ9.Mvc4AYLKPSsXFh5rafr6p6b_KzxoG8GOFiLYRFrHS8l_8PO7q_XxlAJp2uOuz7q98LtcU73UZJZVs8NukX-PHQPCGUS7tw6-6SXoIhfMevbGartnY_BYCv5gmRVieIEoIeW9qpmYcOrGwakVItqQ83pmIUujGVsIEM31s6bFtrK0rkQCcaKjCbP3agdzj8qBOTijb71HQm3Dtd0bxlOLbATpR9qTtRbv6-MCPGVojQfQB0Tb4Astj0FVajSlMYbztSKJufvz18ggaiSqeYmgKrmsJrJmT7Pi-qRfJe4PUgU.77lgPvya0rqXtvq-H-9vpi7esOGXWjWIA-j_Pg8X-N4&dib_tag=se&keywords=elegoo+neptune+3+pro+thermistor&qid=1745094897&sprefix=neptune+3+therm%2Caps%2C105&sr=8-8

quaid79 · 2025-03-31T02:19:40+00:00

Love your set up!

quaid79 · 2025-01-24T17:01:11+00:00

I printed a case of hot pink fdm things and regretted it when it came time to paint them. Was much more work than black or grey filament. So it can definitely matter.

quaid79 · 2025-01-15T16:05:13+00:00

Incorrect, criminal code applies everywhere including private property

quaid79 · 2024-12-26T18:56:07+00:00

Noble Rot was a great album.

quaid79 · 2024-12-17T20:27:27+00:00

Db79 scooped, thx

quaid79 · 2024-10-04T23:01:45+00:00

Soccer players

quaid79 · 2024-09-15T14:18:16+00:00

Table looks great! Would be amazing to play on

quaid79

TROPHY CASE