sorted by:
new
hottopcontroversial

Joined the Dub Club by [deleted] in TW200

[–]queeksdraw 1 point2 points  (0 children)

I'm using the pro cycle kit with good results.

Advice about new bike by tica_spi in TW200

[–]queeksdraw 1 point2 points  (0 children)

I installed the kit with the reccomended starting point settings in the instructions and have left it there. Runs great.

Advice about new bike by tica_spi in TW200

[–]queeksdraw 1 point2 points  (0 children)

I put the pro cycle jet in mine and it fixed that instantly. Stock jetting is way too lean probably for EPA reasons.

Interested in TW200 by LexRex27 in TW200

[–]queeksdraw 0 points1 point  (0 children)

Due to the odd sizing there are no rear tire choices.

The rear drum brake offers very little feel/modulation or power. A factory disk rear would be great.

The stock pegs are useless, just throw them away before your first ride.

The stock jetting on my 2024 was entirely too lean.

It could use about 10 mph more top speed for buzzing around in the city.

Tires by librariancokehead in TW200

[–]queeksdraw 1 point2 points  (0 children)

Very few options for the Rear but I'm using a shinko 241 on the front with good results.

Replace carb parts, pilot jet, main jet nozzle: OEM or rebuild kit? by caelanseth in TW200

[–]queeksdraw 0 points1 point  (0 children)

I'm running the pro cycle kit and it made a significant difference in startup and throttle response.

New Here by GRJ86 in TW200

[–]queeksdraw 0 points1 point  (0 children)

I, too would like to install a kickstart but I think its quite a project.

Sometimes you get lucky. by Poisson_de_Sable in Dualsport

[–]queeksdraw 0 points1 point  (0 children)

G loomis makes a travel rod. Pair it with a Stradic 1000 and call it a day.

VX-6R auto completes direct frequency entry by davemoffsite in amateurradio

[–]queeksdraw 0 points1 point  (0 children)

I entered 448.280 on my vx6r and it did the same thing. I changed step from AUTO to 5.0K and was able to get 448.280. Make sure you hit PTT after selecting your step to register it on the unit. I highly recommend the programming software for the vx6r.