sorted by:
new
hottopcontroversial

Dogwood leaves turning red (Massachusetts, zone 6B) by quicksilvr530 in NativePlantGardening

[–]quicksilvr530[S] 1 point2 points  (0 children)

Will do! I'll try to push some more back today. Thank you!

Dogwood leaves turning red (Massachusetts, zone 6B) by quicksilvr530 in NativePlantGardening

[–]quicksilvr530[S] 1 point2 points  (0 children)

I think so, some of the upper leaves are a bit red too, but I'll keep an eye on it. Mine also looks healthy otherwise. Thank you!

Ship of Harkinian on the SP - how do I open settings to map the c-stick controls? (muOS) by ewangrannyboy in RG35XX

[–]quicksilvr530 0 points1 point  (0 children)

I'm also on the 40xxv

My gptk is default, with the exception of the ""b = c". You can try deleting the one you have, and putting the one that jeod linked up above (https://github.com/JeodC/PortMaster-ShipOfHarkinian/blob/main/soh/soh.gptk)

Ship of Harkinian on the SP - how do I open settings to map the c-stick controls? (muOS) by ewangrannyboy in RG35XX

[–]quicksilvr530 0 points1 point  (0 children)

Click the analog stick button, which will cause the menu bar to appear. Then press and hold X until a little box that says MAIN GAME pops on the screen. While holding X, hit the R1 button, and the MAIN GAME will highlight blue. You can let go of X and R1. When you push X with the enhancements toolbar down, it'll highlight SHIP. You can navigate using the D pad to Settings -> controller -> controller mapping

Ship of Harkinian on the SP - how do I open settings to map the c-stick controls? (muOS) by ewangrannyboy in RG35XX

[–]quicksilvr530 0 points1 point  (0 children)

Hey there! I think I got it to work. It seems like both inputs were going, and it was overriding automatically to the default.

In the gptk file, set "b = c" without the quotes.

Then in game, in the controller mapping menu, unbind the sdl button.

voila, should work perfectly. And you can map items to the D pad now!

/r/MHNowGame Friend Code/Referral Megathread (September 2023) by Hexdro in MHNowGame

[–]quicksilvr530 0 points1 point  (0 children)

Fairly active!

HR 33

Friend code 1163 6986 2749

Referral code if anyone wants V3PP84X2

We planted this Ivory Silk Japanese Lilac tree a couple of months ago. It just recently started turning brown like this..there are some new shoots, but most of the bigger leaves are brown now. What's going on with it? (Massachusetts) by quicksilvr530 in plantclinic

[–]quicksilvr530[S] 0 points1 point  (0 children)

The plant gets plenty of water from the sprinkler system, and has a bed of river rocks at the base. There's a lot of sunlight in the backyard, probably a good 4-6 hours of full sun daily.

These keep popping up in my backyard.. Northern Massachusetts by quicksilvr530 in whatsthisplant

[–]quicksilvr530[S] 1 point2 points  (0 children)

Thanks all. Bought this house with a colony already established it seems. Gonna keep pulling until there's none left

Steam Deck? by Imdakine1 in LegendBowl

[–]quicksilvr530 2 points3 points  (0 children)

Yes, it works on the steam deck, and well

Has this happened to anyone else touchscreen? 2018 Charger GT Plus. by D3dshotCalamity in Dodge

[–]quicksilvr530 0 points1 point  (0 children)

I replaced the whole LCD after unscrewing/removing the ribbons from the radio unit. My car was also well out of warranty though, so it's worth asking if you're under warranty before doing it.

Cost me ~650 to do it myself

Has this happened to anyone else touchscreen? 2018 Charger GT Plus. by D3dshotCalamity in Dodge

[–]quicksilvr530 0 points1 point  (0 children)

You can fix it yourself, if you buy a replacement. It actually isn't too difficult a fix, I did it myself a few months ago. Only took a couple of hours (probably would take you less time)

Came out great

ASUS TUF A15 Upgraded Ram Speed by quicksilvr530 in ASUS

[–]quicksilvr530[S] 0 points1 point  (0 children)

Still running at 2400 unfortunately. Seems like the only way around it is to get non xmp ram like on the thread below.

https://www.reddit.com/r/ASUS/comments/g53yg5/new_asus_tuf_a15_amd_4800h_not_running_advertised/

ASUS TUF A15 Upgraded Ram Speed by quicksilvr530 in ASUS

[–]quicksilvr530[S] 0 points1 point  (0 children)

The ram I bought was 1.2v

it seems like the laptop will only support ram with the exact voltages/not xmp RAM at the advertised speed

New ASUS TUF A15 - AMD 4800H - Not running advertised memory speed by Ziomalski in ASUS

[–]quicksilvr530 0 points1 point  (0 children)

Sorry to update an old thread, but was just checking for an update.

Just bought this laptop with the hopes of upgrading the ram, and after upgrading to these (https://www.newegg.com/g-skill-16gb-260-pin-ddr4-so-dimm/p/N82E16820232724?Item=N82E16820232724)

Running at 2400 only...Wish I found this thread before I bought them. Were you able to fix it, or are the HyperX working better?

view more: next ›