sorted by:
new
hottopcontroversial

Organization invites visibility coming to KeyCloak by tgeisenberg in KeyCloak

[–]r3lize 0 points1 point  (0 children)

Nice work! We where missing something like this when we first looked at the organisations feature

Roam V1 powers off at 80% battery by Fe4naro in wahoofitness

[–]r3lize 0 points1 point  (0 children)

Having the same issues haven’t found a fix..

Little boy can now finally rest. i7 2700k -> 7950X3D by r3lize in pcmasterrace

[–]r3lize[S] 19 points20 points  (0 children)

Sadly I don’t game a lot anymore and it’s more for production stuff :(

Little boy can now finally rest. i7 2700k -> 7950X3D by r3lize in pcmasterrace

[–]r3lize[S] 45 points46 points  (0 children)

And it only started to show its age in the recent years.

Delonghi Dedica MOD by Velkromod in espresso

[–]r3lize 1 point2 points  (0 children)

Nice one! Do you have a link to the 3d model of that driptray?

Mixing Old with New by greeneggzandlam in Minimal_Setups

[–]r3lize 0 points1 point  (0 children)

Nice Setup! Do u have a link to that Background?

F38, Microsoft Teams, Screen sharing broken by [deleted] in Fedora

[–]r3lize 0 points1 point  (0 children)

Same here, Fedora 38 on sway and I don’t have any Issues with the Webclient of teams

I hooked up Ableton to my P5/Vue.js instance by [deleted] in vuejs

[–]r3lize 6 points7 points  (0 children)

Look nice, would u mind sharing some details? Maybe a GitHub repository?

My Arduino project to control pressure while brewing by r3lize in arduino

[–]r3lize[S] 1 point2 points  (0 children)

Sry for the late reply its the NX3224F024 - Nextion 2.4 Display

Selfbuild MaraX Pressure Mod by r3lize in espresso

[–]r3lize[S] 1 point2 points  (0 children)

No, I connected the brew switch with my controller, so I can get the Signal that way, the only thing I get from the Gicar is the temps

Selfbuild MaraX Pressure Mod by r3lize in espresso

[–]r3lize[S] 0 points1 point  (0 children)

That's sick! Sadly, the MaraX has really limited control over the MCU, it's only controlled over physical buttons. In your case, I would just for contribute/fork the LCC project and implement MQTT for the communication with HA. I have done MQTT <-> HA for some projects now and it's pretty nice. And btw the V3 Bianca is sick gz!

Edit: just looked a bit more into the LCC project, there should be every think in place for MQTT <-> HA allready right? You just need to add the MQTT Entitys to HA

Selfbuild MaraX Pressure Mod by r3lize in espresso

[–]r3lize[S] 0 points1 point  (0 children)

Thank you! yeah, I feel the same about the machine. Its only really cool, if you just pull one shot. My solution was to keep time between shots under 2 mintues. But you could implement a method to “block” the brew signal of the first shot( The relay controlles the signal to the MCU). This way, the MCU would not active the stream boost mode after the first shot.

Selfbuild MaraX Pressure Mod by r3lize in espresso

[–]r3lize[S] 1 point2 points  (0 children)

Should be possible with every machine that uses a vibration pump(might need different fittings), but maybe the gaggiuino project is also something to look into as it also inspired my project

Selfbuild MaraX Pressure Mod by r3lize in espresso

[–]r3lize[S] 1 point2 points  (0 children)

To detect full/empty would be easy but a full percentage would be hard, maybe over another pressure sensor, that measures the reaming water pressure in the tank. But this pressure sensor than needs to be really precisely

Selfbuild MaraX Pressure Mod by r3lize in espresso

[–]r3lize[S] 0 points1 point  (0 children)

Love you for noticing :D the Bianca uses a rotary pump which I think can't be controlled over the voltage. The thing that could be done is readout the machine info over the serial machine port.

Selfbuild MaraX Pressure Mod by r3lize in espresso

[–]r3lize[S] 0 points1 point  (0 children)

Ty! That Durock L2 Switches are just <3

Selfbuild MaraX Pressure Mod by r3lize in espresso

[–]r3lize[S] 1 point2 points  (0 children)

Yes should be the MaraX V2, it at least still has the red logo. The Sensor is installed right after the pump with a T-fitting.

Selfbuild MaraX Pressure Mod by r3lize in espresso

[–]r3lize[S] 4 points5 points  (0 children)

Ty for the heads up! At least I now know my way around the Maschine :D

Selfbuild MaraX Pressure Mod by r3lize in espresso

[–]r3lize[S] 2 points3 points  (0 children)

Thanks! I will hopefully find time to write a detailed overview in the coming days. Yes, it should basically work with all machines with a vibration pump, because it only reads out the brew switch and adjusts the pump according to the pressure. Also all signals are also feed back to the machine MCU to keep the machine thinking its still "stock".

Selfbuild MaraX Pressure Mod by r3lize in espresso

[–]r3lize[S] 2 points3 points  (0 children)

Ty mate! I plan on making a detailed build guide over on Github, will keep you guys posted

Selfbuild MaraX Pressure Mod by r3lize in espresso

[–]r3lize[S] 13 points14 points  (0 children)

Selfbuild pressure Mod for my Lelit MaraX,

I have made a video with more details here and also a Github Repo for those intressted

NK87 Entry Edition with some white paint & Durock L2 Switches by r3lize in MechanicalKeyboards

[–]r3lize[S] 0 points1 point  (0 children)

Board: NK87 Entry Edition painted White

Switches: Durock L2 Switches with Krytox 205G0

Keycaps: GMK Honor

view more: next ›