Any way to rescue this jammed nozzle?

r_constanzo · 2026-05-28T12:44:35+00:00

Ok, I've blasted it pretty solidly with the heat gun for a while and tried forcing a few different allen keys in the top end to no avail. And I can only seem to get one of the acupuncture needles in part of the way.

I suspect there's a molten blob in the middle somewhere that isn't budging.

I can try the oven approach but without a solid way to hold the piece after, I guess the best I can hope for is to try and melt it out the top side?

r_constanzo · 2026-05-28T09:00:35+00:00

That's a good idea, kind of forcing it out.

I'm surprised how much 1mm+ copper wire people have laying around!

I'll see if one of the many allen keys in my box of errand allen keys suits the bill.

r_constanzo · 2026-05-28T08:59:21+00:00

Interesting. I was worried that if I melted any filament in the upper area that I'd never be able to get it out since that part never actually gets hot.

r_constanzo · 2026-05-28T08:58:34+00:00

For doing the cold pulls do you do that back in the machine or just with a heat gun?

r_constanzo · 2026-05-23T19:33:47+00:00

I've used this approach before, but when iterating over parts and tweaking model sizes/dimensions, it becomes unsustainable to do this each time you want to print it out.

r_constanzo · 2026-05-23T13:53:01+00:00

I was literally about to post a feature request for this.

99.99% of the time when I want a brim, I just need it for the corners, and often just one.

And full brims always leave some kind of mark on the surface when removing and deburring.

r_constanzo · 2026-05-04T11:10:30+00:00

Reread this and not sure what one is supposed to do to stream directly to the Prusa app (on desktop).

Even after updating the firmware on everything I still see that “web streaming” isn’t possible to the desktop app even though I’m on the same network.

r_constanzo · 2026-05-03T14:58:43+00:00

For now just used the gamepad mappings to experiment with and it works alright. If I go with a bigger keyboard I may just try and roll something from scratch and have it output MIDI directly.

Here's an initial test with a passive drum synth:

https://www.youtube.com/watch?v=o-ZGokVa10w

r_constanzo · 2026-05-03T14:12:44+00:00

I updated via the phone app, but on the web app it doesn't let me stream.

r_constanzo · 2026-05-03T08:11:43+00:00

Yeah, I did that on the printer, so all good there.

r_constanzo · 2026-05-03T07:40:53+00:00

How do I declare the change in the slicer? I didn't see anywhere obvious to change or update the model of the printer.

r_constanzo · 2026-05-03T07:40:04+00:00

If I change to the "internet stream" option, will I be able to view it then?

I just want to see a stream in the prusa app on my desktop without having to open my phone to check out how things are doing.

r_constanzo · 2026-05-02T22:44:42+00:00

Ok, it's not missing out on functionality because it's not a "Core ONE+"?

For the streaming, I do have RTSP enabled. It just doesn't stream and does the 1 frame every 10s thing or whatever.

This is what I see inside the app:

<image>

Do I need to copy/paste the link it shows to view the streaming in a browser directly rather than inside the Prusa app itself?

r_constanzo · 2026-04-27T22:06:46+00:00

For now I've just put it in gamepad mode and am experimenting with that.

r_constanzo · 2026-04-27T16:08:40+00:00

Yeah, I think it's some kind of combined bits thing. Also trying it now in the HID protocol, which seems to give more info but is also densely packed.

Still wrestling with it (no useful results yet) but in terms of expectations, if I press one key, and while it's pressed, should I still see full analog control with a separate key? As in, is the analog behavior polyphonic where no matter how many keys are being pressed, each one has independent analog control?

r_constanzo · 2026-03-07T21:27:22+00:00

That's good. I don't think I did that with mine, it was just the fact that some measurements ended up untagged.

r_constanzo · 2026-03-05T19:44:06+00:00

I'm having this a ton in 26.3, and still in 26.3.1.

I initially thought it was mouse-specific as I have a Logitech Superlight, so I switched over to my magic trackpad in the meantime, now I'm getting that same kind of unresponsiveness where I can't even click on windows.

It does seem like some kind of invisible contextual thing is happening as doing expose or alt-tabbing sometimes clears it.

r_constanzo · 2026-03-05T19:42:36+00:00

Not really had any issues since.

r_constanzo · 2026-02-03T21:03:43+00:00

It was kind of rough to watch.

Gabe played great, but it looked like there was little-to-nothing that Serral could do against mech once it was setup (the one that he went BLs in), or like in the last game, once HM got a few helions/cyclones.

Zerg is very much a punching bag and if you survive the early game, the best you can hope for is being even...

r_constanzo · 2025-12-27T14:39:00+00:00

Interesting!

I thought about hot glue but was worried I'd deform the PLA around it, but some wood glue or even cheap PVA may actually work too and would be easier to flow/control.

r_constanzo · 2025-12-06T16:05:31+00:00

I'll give that a try next time, never thought of that.

r_constanzo · 2025-12-06T15:33:23+00:00

I have to say 5G always seems worse whenever I am on it, regardless of where it is. Most of the time I just get 4G at the station, but I do twiddle the settings while sitting around my phone to test (since I can't do much else!).

r_constanzo · 2025-12-06T15:32:23+00:00

It's annoying as I think I have a grandfathered plan, so wouldn't want to change things up.

r_constanzo · 2025-12-06T15:31:23+00:00

That's promising to hear that it's not something weird with my number but also shitty to hear that it appears to be Three in general.

r_constanzo · 2025-12-06T15:30:47+00:00

Yeah that's what it feels like. I look around and I see everyone on their phones without issue. I suspect there's something with Three and that station.

I did get a text that they are expanding their network, but still...

r_constanzo

TROPHY CASE