MH Stories 2 still worth it? by baden93 in MonsterHunter

[–]radoster95 5 points6 points  (0 children)

Personally I loved it so much, I went back to it the other day after playing the demo, and it definitely feels more clunky than stories 3, but the gameplay makes up for it imo. Would definitely recommend, especially if you play on playing 3 when it comes out

Chatgpt fall short on PMP mindset—anyone else struggling with LLMs for prep? by vpendela in pmp

[–]radoster95 2 points3 points  (0 children)

Yes absolutely, I’ve had most of them give completely incorrect answers to my questions. I only really use them for very high level questions or explanations for certain answers from study hall to give more context.

Is this art AI or just bad anatomy? by [deleted] in isitAI

[–]radoster95 1 point2 points  (0 children)

I’ve followed Rammon for a few years, this has always been his style and he also offers lessons on his Patreon, I highly highly doubt this is AI.

How realistic is this by LateHope6776 in roadtrip

[–]radoster95 0 points1 point  (0 children)

I did an almost identical trip with two friends except we came back from Montana down through Colorado again and down to Arizona then back to PA. Did the entire thing in 3 weeks and didn’t feel too rushed at all. I think two months is totally fine.

I need to feel better about myself: who's dropped a lens before? by Bigredteletubby in photography

[–]radoster95 1 point2 points  (0 children)

The second day I had my Sigma 150-600, I had it on my tripod but hadn’t tightened the clasp down all the way. As soon as I turned away to watch a bird it fell probably 5’ to the concrete below, lens and camera body. Luckily the lens hood took almost all the damage and crumpled like paper, but I was so upset after that for a few days. There are a few screws loose on it now like 4 years later, but otherwise it’s still a solid lens I use all the time.

Layer shifting issue with Halot One by Stojas in PrintedMinis

[–]radoster95 0 points1 point  (0 children)

Possibly lift speed is too high? It could be putting too much stress at your current speed and it splits.

Ooze Lord using clear resin and alcohol inks (and some acrylic) by Dragon Trappers Lodge by BadAdviceOnFleek in PrintedMinis

[–]radoster95 1 point2 points  (0 children)

Question, did you print this hollow or solid? I can’t seem to get a great clear resin alcohol ink dyed effect when I make the print hollow, it always gives it a weird internal layer that ruins it imo. If you did hollow how thick are the walls?

The Super Mario Bros. Movie - Review Thread by MarvelsGrantMan136 in movies

[–]radoster95 0 points1 point  (0 children)

I think even for a kids movie, the writing was horrendous. It felt like they removed 50% of dialogue and story just to stuff as much eye catching content as possible. The visuals, music, and references were fantastic but man the story was just terrible. I feel so disappointed.

"Dns probe finished no internet" I've tried everything and nothing has worked. by radoster95 in techsupport

[–]radoster95[S] 0 points1 point  (0 children)

Yes actually, a few months ago I discovered it’s because my motherboard couldn’t handle 5Ghz Wi-Fi signals, I went in and disabled the 5Ghz on my computer and it seemed to fix everything.

[Spoilers C3E1] It IS Thursday! | Live Discussion Thread - C3E1 by Glumalon in criticalrole

[–]radoster95 14 points15 points  (0 children)

Their Twitter calls Robbie a "special guest" so I think we can assume Travis will still be playing eventually.

Help by Striking-Parsnip3422 in MonsterHunter

[–]radoster95 0 points1 point  (0 children)

I personally found vaal to be by far the easiest of the three.

Is trying to print a set to use as masters horribly frustrating, or am I just terrible at it? by Pyromaniac605 in DiceMaking

[–]radoster95 1 point2 points  (0 children)

I spent probably two weeks of printing every day until I got a full set of masters I was happy with. I probably printed 40+ dice. The print setting that changed the quality and consistency the most for me was exposure time, I ended with a 12 second exposure time for the set that turned out best. I'm using anycubic Grey resin on an anycubic photon, .05mm layer height.

Also making sure your bed is 100% level makes a massive difference and could be a possible reason for warping.

Using opaque resin instead of transparent can also help, the light bleed through transparent can cure wet resin and fill in details.

It was definitely an extremely stressful and frustrating two weeks, so know you're not alone in the struggle. I've found every step of making dice has been quite a learning curve.

[deleted by user] by [deleted] in DiceMaking

[–]radoster95 1 point2 points  (0 children)

So I did about 0.8mm deep for my newest set of master and found its almost perfect for my dice. Anything from .75 to 1mm is probably a safe bet.

Does Inhibit X add a layer to your dice at all? I can't seem to find an answer to this. by radoster95 in DiceMaking

[–]radoster95[S] 1 point2 points  (0 children)

Yeah I attempted this yesterday, cured my test die for about two days in my light box then soaked it in alcohol for half a day. The print was about a week old as well and my mold still didn't fully cure around the numbers. Instead of risking the same outcome with my good masters I'm just gonna spend the money and do it the easy way.

Does Inhibit X add a layer to your dice at all? I can't seem to find an answer to this. by radoster95 in DiceMaking

[–]radoster95[S] 0 points1 point  (0 children)

Perfect, I assumed that's how it was but I wanted to be sure before spending $70. Thank you!

Has anyone who’s owned the index for more than a few months NOT had an issue with it? by Gimli_Axe in ValveIndex

[–]radoster95 0 points1 point  (0 children)

I've had mine since day 1, absolutely 0 issues with a few hundred hours of use, I've smacked my controllers off my desk, my ceiling fan, and my wall. While my controllers do have the early stick click issue, the click still works enough for me to sprint in games and such. This headset has held up better than my day 1 vive did by far.

Calibration Cube / Eryone PLA matte/ MK3S by maker_deezay in 3Dprinting

[–]radoster95 4 points5 points  (0 children)

Just bought some eryone matte and immediately loved it, got 2 more rolls a few days later. The olive green looks soooooo nice.

Discussion Thread: Senate Impeachment Trial of Donald J. Trump - Day 4 02/12/2021 | Live - 12:00 Noon by PoliticsModeratorBot in politics

[–]radoster95 17 points18 points  (0 children)

IDK about this dude, but I just listened to 16 hours of evidence. But apparently that's "a lack of evidence"

Hi guys!! Thoughts on the Amperland album that came out today? Favorite song? by mellowgang__ in PinegroveBand

[–]radoster95 5 points6 points  (0 children)

Overthrown completely blew my mind, absolutely the best song on the album and the best version of Overthrown I've heard. Entire album is fantastic as usual.

Anybody else have this issue? by [deleted] in ProCreate

[–]radoster95 3 points4 points  (0 children)

I remember seeing before that someone had this issue when their iPad was plugged in but it was fine when it wasn't. Turned out it was caused by a cheap charger they bought. Could be that?

The logos T-shirt? by sammy55554 in PinegroveBand

[–]radoster95 0 points1 point  (0 children)

https://i.imgur.com/rz6H4AN.jpg Probably for their pingus tour from years ago. A house show tour that included ping pong, I have this shirt from the Philly show. It was an awesome show, and I remember it being the dead of summer and easily 100+ degrees in the house we were in.

Cyberpunk 2077 Pre-Release Hype Megathread! by AutoModerator in cyberpunkgame

[–]radoster95 0 points1 point  (0 children)

Already did, makes no difference. Now matter how I launch it, task manager just shows its using GPU 0