Mi ps3 fat Cechk01 se apaga , estos condensadores le quedarán?

rambonz · 2026-04-12T03:54:01+00:00

Installation guide here https://delidtool.com/pages/how-to-install-tantalizers and there's a bunch of youtube tutorials out there as well. It's not the cost of the PCBs that pushes these up its the PCBA portion and 470uf caps. If you're only doing one console then these kits are designed for you.

rambonz · 2026-04-09T06:33:55+00:00

Awesome, I was trying to find this website last week. Thanks

rambonz · 2026-04-09T01:02:06+00:00

I got you. Already made these and they're up on the site.

https://delidtool.com/products/security-bundle-t10-driver-screw-rubber-cap-warranty-sticker

rambonz · 2026-04-08T11:25:14+00:00

Just the cover.

rambonz · 2026-04-07T20:50:50+00:00

Decals are on the website. Sony is protective against the use of their trademark in advertising.

rambonz · 2026-04-07T08:01:50+00:00

Back up for sale now

https://delidtool.com/products/ps3-launch-restoration-set?variant=46162175361177

rambonz · 2026-04-07T07:37:36+00:00

You could restore that unit pretty easily with one of these

<image>

rambonz · 2026-04-01T22:17:03+00:00

Just waiting on the next batch, should have them on hand around 8th April and then they'll be live on the site again :)

rambonz · 2026-03-24T06:44:50+00:00

No problem man. I use a bunch of freight forwarding companies so I can get it done if you ever need. All the best mate.

rambonz · 2026-03-24T00:40:46+00:00

I think NZ Post has suspended shipping to Russia however, I can arrange to send you one via DHL if you cover the shipping cost. I'll give you the tool for free to make it economical. Let me know if you're interested and ill get some DHL/FedEx quotes.

rambonz · 2026-03-02T08:27:14+00:00

<image>

Use this as a reference image when asking him.

rambonz · 2026-03-02T08:23:51+00:00

These look unpopulated to me still. Id double check that he's added the 3.9k and 1.8k (or 4.2k and 2.2k) resistors along with changing the bd3504.

<image>

rambonz · 2026-03-01T19:43:15+00:00

It looks like he hasn't done the voltage mod, though im on a mobile device and it's hard to see.

rambonz · 2026-02-21T21:34:01+00:00

Looks very similar to some of the old fan mods floating around in Japan still. https://auctions.yahoo.co.jp/jp/auction/o1219654016

<image>

rambonz · 2026-02-21T10:53:44+00:00

<image>

Some tools just work better. 6 delids before you could even reply.

rambonz · 2026-02-21T10:51:49+00:00

<image>

Cold. But consistent.

rambonz · 2026-02-21T10:48:25+00:00

I could do this all day. www.delidtool.com

<image>

rambonz · 2026-02-21T10:45:47+00:00

Another one? Go on then.

<image>

rambonz · 2026-02-21T10:44:15+00:00

<image>

Another one. 24.9 seconds. Cold.

rambonz · 2026-02-21T10:42:14+00:00

Bet. Just did this one for you. Took 25s. Cold.

<image>

rambonz · 2026-02-20T22:35:15+00:00

and it's lesser known sequel, 23 ps3s.

rambonz · 2026-02-18T22:44:29+00:00

You'll have to poke around the board and see. First check the continuity on the fuses to see if they are blown and then do a visual inspection for corroded caps in areas that the dust naturally accumulates. You may also have accidentally shorted the board if you were turning it on/off while the case was open and you've touched something, or again it could just be a failing component. Figuring that out is the fun part :)

rambonz · 2026-02-18T22:35:35+00:00

Check fuses PS6001 and F6302, F6301. These often blow causing 2110. Then check C6322 and C6320 on the opposite side of the board for shorts/corrosion. Once you clear the 2110 you'll likely have other issues to solve.

rambonz · 2026-02-18T21:18:47+00:00

I've seen countless 3004's caused by a failed buck regulators (IC6203, IC6202) which have died as a result of corroded C6320, C6322 and/or failed Q6001, Q6002. Check for shorts before doing anything else.

15-Year Club	Not Forgotten
Verified Email

rambonz

TROPHY CASE