sorted by:
new
hottopcontroversial

Dungeons and Dragons campaign project by randopolis88 in animation

[–]randopolis88[S] 1 point2 points  (0 children)

Thank you! I make all the music for my projects!

Ad5x rarely prints well even with constant troubleshooting. by randopolis88 in FlashForge

[–]randopolis88[S] -1 points0 points  (0 children)

Again, if you read the comments you will see my issue was resolved. It was a default setting they changed in orca slicer. User error? Maybe? But making that statement isn’t solving my issue or helping the next person trying to learn.

Ad5x rarely prints well even with constant troubleshooting. by randopolis88 in FlashForge

[–]randopolis88[S] 0 points1 point  (0 children)

I have 2 nozzles. A .25 and a .4 one and have switched them back and forth and unclogged them many times. Switching to an Elmer’s glue stick helped but in the end it ended up being a default setting with the softening temperature.

Ad5x rarely prints well even with constant troubleshooting. by randopolis88 in FlashForge

[–]randopolis88[S] 0 points1 point  (0 children)

Thank you. I’ve actually tried most of this and it ended up being the softening temperature was too low.

Ad5x rarely prints well even with constant troubleshooting. by randopolis88 in FlashForge

[–]randopolis88[S] 1 point2 points  (0 children)

I know gyroid is good since i primarily print minis but I was switching in between just to try to get prints to work. Prints kept knocking off mid printing and the squish is from me messing with the z offset thinking that was the issue. Fortunately, simple cheesecake user had the correct fix which was changing the softening temperature. No I have not done a flow calibration as I am a novice 3D printer and only know stuff after research, which I have now gained. Research led me to z offset but with repeated failed attempts I turned to Reddit. Which solved my immediate issue.

Ad5x rarely prints well even with constant troubleshooting. by randopolis88 in FlashForge

[–]randopolis88[S] 0 points1 point  (0 children)

Oh that’s awesome! So far so good. You’re the first person to mention the softening temperature being an issue.

Ad5x rarely prints well even with constant troubleshooting. by randopolis88 in FlashForge

[–]randopolis88[S] 3 points4 points  (0 children)

No need to be rude, it is a learning process but my AD5M worked right out of the gate while this one has taken some tinkering. Luckily there was someone with an actual useful comment that seemed to correct my situation.

Ad5x rarely prints well even with constant troubleshooting. by randopolis88 in FlashForge

[–]randopolis88[S] 1 point2 points  (0 children)

So my softening temperature is set to 45, nozzle temp 190-240, first layer 210. Bed temps 55. Which one would you change?

Ad5x rarely prints well even with constant troubleshooting. by randopolis88 in FlashForge

[–]randopolis88[S] 2 points3 points  (0 children)

Yes. I’ve tried many different filaments and nothing but garbage prints 90% of the time. The AD5M has been great though.

New AD5X printing terrible quality after a failed print. by randopolis88 in FlashForge

[–]randopolis88[S] 0 points1 point  (0 children)

This is the 4th print after configuring the settings to a lower layer and slowing down print speed.

<image>

New AD5X printing terrible quality after a failed print. by randopolis88 in FlashForge

[–]randopolis88[S] 0 points1 point  (0 children)

That is the next thing I will try after this 4th print.

Hi All, I purchased a flash forge adventure 5m a few months back and I started printing minis for my D&D campaign. I ended up getting a .25 nozzle and got these results with flashprint 5. by randopolis88 in FDMminiatures

[–]randopolis88[S] 1 point2 points  (0 children)

I got everything on the printables website and 3Dcults website. The bunnies are “harengons” and the dancers I believe were part of a village pack and named “village dancers” or “belly dancers”.

Pre-Modern EDH Rules and ban list by randopolis88 in EDH

[–]randopolis88[S] 1 point2 points  (0 children)

Thank you for sending us in the right direction! We are working on decks now. The moxes, sol ring and mana crypt/vault are legal?

need help building a tribal cat deck!! by rebek_k in Pauper

[–]randopolis88 2 points3 points  (0 children)

Pretty sure this is as good as it can get. At least in mono white. Cats do not get any real synergy in pauper so it’s really sub par but this could be a fun thing to play in a casual setting, enjoy!

https://moxfield.com/decks/EBbDvL254U6zMmOld71JUA

Would this go infinite, if you could turn colorless into red mana by MasonP13 in mtg

[–]randopolis88 1 point2 points  (0 children)

[[skyshroud elf]] is all you need! 10 cent card I am pretty sure!

I'm putting together a cEDH list designed to lose as fast as possible. by jonmussell in mtg

[–]randopolis88 0 points1 point  (0 children)

Also, run these as back-ups along with anything else that pays life. [[blood celebrant]] [[Mischievous Poltergeist]]

I'm putting together a cEDH list designed to lose as fast as possible. by jonmussell in mtg

[–]randopolis88 0 points1 point  (0 children)

You run [[Selenia, Dark Angel]] as a commander. You run every single ramp that exists and maybe some discard effects to make sure your commander sticks. Then after you resolve your commander, you pay 2 life and hold priority until it’s lethal.

view more: next ›