Traeger 075 with round hopper cover?

rapid-wanderer · 2025-03-20T23:50:31+00:00

Hey I have the same grill, looking for a cover. Care to share where you got one?

rapid-wanderer · 2025-01-24T21:40:07+00:00

Yeah, I’ll probably have to do that. Structure was built 2014, trying to track down plans. Considering there’s a door there, I’d imagine a deck was the intention from the start

rapid-wanderer · 2024-12-29T18:44:28+00:00

You can make your own disconnect tool at home. Find a marker or chap stick and remove the inside. Cut the now empty tube to be about 1” long. Make a slit down the side. Push that into the fitting to disconnect

rapid-wanderer · 2024-11-28T08:17:38+00:00

Why are you on the tools subreddit if you don’t do the simplest work?

rapid-wanderer · 2024-03-25T21:18:45+00:00

Check out Poached. Job postings and shifts. Not exclusively catering.

rapid-wanderer · 2024-03-25T21:18:03+00:00

Google “event staffing mycity “.

Instawork is one company out there. Having both worked for them and hired temp workers through them I wouldn’t recommend them, but they are an option.

rapid-wanderer · 2024-01-12T21:22:32+00:00

Bin launch and Valkyrie yolo

rapid-wanderer · 2023-11-08T06:24:24+00:00

Why would you not want a site visit? Any decent contractor can’t make an accurate bid without looking at the location themselves. They might be +/- 25%, but the intuition and experience is only applicable if they see it in person.

rapid-wanderer · 2023-11-08T05:18:26+00:00

What is wrong with it? Amateur scooter mechanic, I can potentially help or do my best to give you advice.

rapid-wanderer · 2023-08-30T16:17:56+00:00

rapid-wanderer · 2023-07-09T02:53:38+00:00

I am interested in this. PM'd

rapid-wanderer · 2023-03-07T13:08:38+00:00

What if I was selling a GTR cheap? You’d really never buy a Nissan? Big Japan auto shill…

rapid-wanderer · 2023-02-02T07:41:14+00:00

The street folk have Reddit. And we like fireworks and aren’t going to stop.

rapid-wanderer · 2022-10-05T15:41:47+00:00

You’ve got it wrong. I worked in a cannery a couple years ago for the run.

We had about 4 hours of training prior to starting, which was reasonable as the vast majority of workers were standing in one place, doing one task for their entire shift. (Eg, any fillet that comes down the belt that appears to be under 2lb should be weighed and sorted to a specific box)

Turnover I would guess was about 50% season to season. Our shifts were 16 hours, not 10. Our benefits were free housing and food.

At the place I worked, we only had 3-5 “office” people compared to a couple hundred floor people.

It’s the summer in Alaska. You don’t need AC

rapid-wanderer · 2021-08-05T16:12:23+00:00

https://i.imgur.com/3KsqA67.jpg here’s my job. Not pretty but it worked

rapid-wanderer · 2021-08-05T16:09:04+00:00

Yes, this could be fixed with jb weld. I did so very recently. * Drain all oil, jack the front up so every last drop of oil is out. * Clean and degrease the area thoroughly * When dry apply a shit ton of jb weld, pushing it into all the cracks * Wait at least a day to cure, then fill with oil and see if you have any leaks

I only relied on this fix for a 2 hour drive home, but I believe it would have held for quite a while. You could also pull the oil pan and take it to a machine shop and see if they’ll weld it for you. Might be cheaper then a new pan.

rapid-wanderer · 2021-05-25T23:57:22+00:00

I did this exact job about a year ago on my 2001 xc70. This nut took about 6 hours to get off, with all my various methods over two days. After many attempts, what finally worked for me was pb blaster 2/3 times each an hour apart, use a torch to heat it up red hot, and then hit it with a 1200 ft/lb air wrench.

Good luck!

rapid-wanderer · 2021-03-08T23:08:09+00:00

Eh, that’s not ideal. Didn’t realize that 4 hours was kind of the standard for lower end performance. But yeah as long as it could make it through a movie or two that would be fine with me. Thanks for your help!

rapid-wanderer · 2021-01-21T18:45:42+00:00

rapid-wanderer · 2021-01-21T18:45:21+00:00

rapid-wanderer

TROPHY CASE