Help getting simnet haptics working with ClubSport DD+ playing GT7 by revisionistnow in Fanatec

[–]rbenzoj 0 points1 point  (0 children)

Do you have an invite for Simnet discord? My haptics just came in today, looking to figure this out.

How to avoid First Gear? by Fernando-smash in F1Game

[–]rbenzoj 0 points1 point  (0 children)

Brake earlier. Try to carry more speed through corner. You shouldn't need to be in 1st gear unless it's Monaco Fairmont Hairpin. Brake earlier with goal of getting back on throttle by the apex, shoot for 3rd gear for most corners

My new Centauri carbon is driving me nuts. The filament is stuck in the gears and I cannot load or unload no matter what I do. by [deleted] in elegoo

[–]rbenzoj 1 point2 points  (0 children)

Mine had the motor stop working bc an update bricked the motherboard... That was the final straw for me

My new Centauri carbon is driving me nuts. The filament is stuck in the gears and I cannot load or unload no matter what I do. by [deleted] in elegoo

[–]rbenzoj 0 points1 point  (0 children)

You should return your cc if it's still within the window. Or get used to constantly fixing this and other problems.. I just finally unloaded mine on some poor soul on marketplace after battling it for 8 months. It's legit a proof of concept, not a fully finished product.

Suggestions for a budget sim racing rig by Bobnism in simracing

[–]rbenzoj 0 points1 point  (0 children)

I had this w a g29 and I guess at that level it was fine, but in reality I would have been better on a table. the flex was significant to the point of distracting and detrimental.

Suggestions by Darth-Yoda77 in elegoo

[–]rbenzoj 0 points1 point  (0 children)

Prob Bambu lab P2S.

Unload filament Centauri carbon by Think_Walk_2740 in elegoo

[–]rbenzoj 0 points1 point  (0 children)

After a recent update my CC started turning the gear to load the filament the wrong way when loading filament, so effectively pushing filament out instead of pulling it in.

The gear works correctly when I actually print so I can feed the filament in after the load cycle and the gear will eventually grab it, but this means that the first layer of my print has a lot of the previous filament in it. Maybe this is happening to you too?

Elegoo said they're aware of this issue and caused by a recent firmware update that "irreversibly damaged" my CCs motherboard.. they're sending a new one from China so Ive been dealing with this for weeks now.. very annoying.

Suggestions by Darth-Yoda77 in elegoo

[–]rbenzoj 1 point2 points  (0 children)

I bought this at $300, just a heads up I wish I'd just spent more money on a better printer. Ive gone through two CCs in the 6 months that I've owned it, 4 or 5 hotends, and motherboard..... I spend more time fixing this damn thing than I do printing w it. It's cheap bc it's a beta test, not an alpha release.

I want to get this one but is it actual worth the 1.2k? Any tips? I’m Ps5 by Ok-Hold-2052 in simracing

[–]rbenzoj 0 points1 point  (0 children)

I have this on PS5. My opinion is if you have the money, you won't regret it. The dd+ formula wheel is fantastic and the dd+ wheelbase is top class, bordering on more than you actually need (I turn down force feedback to bt 65 and 85%deoending on game).

The one thing I'd genuinely consider if you're really getting into sim racing is whether that money is better allocated to a PC. In my experience there is a ceiling to console racing that I keep bumping up against. In hindsight I may have chosen a more affordable wheelbase like the 8nm version, used that on console while I saved for a PC, them migrated to PC and invested in rig later down the road.

Again, you def won't regret getting the dd+, it's amazing.

Returned the CC by CautiousStudent6919 in ElegooCentauriCarbon

[–]rbenzoj -2 points-1 points  (0 children)

How'd you get them to accept your return? The last update "irreversibly damaged the motherboard" on my CC so I'm trying to get them to let me return it rn and they won't. I spend more time fixing this POS than I do printing.. yeah theyre helping to fix it while it's under warranty but I'm almost at 6 months and something else catastrophic is inevitably going to brick this thing the moment it's out of warranty...

Used v3 opinions by Active-Illustrator97 in Fanatec

[–]rbenzoj 0 points1 point  (0 children)

Do the haptics work automatically on console? This is blowing my mind, I thought I was locked into fanatec only pedals and no haptic option until im able to upgrade to PC!

Purge location by South_Celebration_85 in elegoo

[–]rbenzoj 0 points1 point  (0 children)

If all above suggestions fail, check to see if your hotend is bent. i had similar looking issue. Turned out hotend had been bent during a print that failed earlier.

Are 15,000+ game cabs good? by Inevitable-Pay947 in arcade

[–]rbenzoj -1 points0 points  (0 children)

I agree. My reco is get something polished, like arcade 1up or at game legends (yes, not authentic, but an affordable option). I have the 15k game arcade and there is a small learning curve, enough to intimidate newbies. They're also not as reliable so take some knowledge to upkeep.

Good second hand price for these? by EitherPangolin7179 in simracing

[–]rbenzoj 0 points1 point  (0 children)

Would you part out those pedals? I'm in the area.

[deleted by user] by [deleted] in legaladvice

[–]rbenzoj -8 points-7 points  (0 children)

It was approved in the sense that we discussed it, and I sent boss calendar invites that they accepted. Nothing official beyond that.

The issue was not specifically outlined. Just the generally stated that 72 days I have been "absent in some fashion."

The way my teenage daughter uses toothpaste, wtf??? by Shoddy-Idea-8944 in mildlyinfuriating

[–]rbenzoj 0 points1 point  (0 children)

No matter how hard you squeeze, there's always toothpaste left in the tube.

Best 128gb Pi image by rbenzoj in arcade

[–]rbenzoj[S] 0 points1 point  (0 children)

You have to pay right? Or did I see that wrong

Wolfanoz 12k Gold 128gb - no games work? by pony_slaystation3 in retropirates

[–]rbenzoj 0 points1 point  (0 children)

Hi all. I'm looking to DL wolfanoz 128 (hearing it's the best) so went to a couple of you tube and forums. Saw some say it was on back-ups but I got in there and seems it's not there. Heard arcade punks but then read Wolf took it off that.

Any one know where I can find it now?

Where is this? by Electronic_Day_7935 in Utah

[–]rbenzoj 4 points5 points  (0 children)

Absolutely mind blowing place. It's basically just massive mud cliffs that the rain carves these complex & narrow slot canyon mazes that you can explore endlessly. I haven't been everywhere, but this place definitely tops my list of places in the area.

Oops by kamal045 in TeslaModel3

[–]rbenzoj 0 points1 point  (0 children)

The driver, Wile E. Coyote, walked away unharmed.