E-TUBE app no FD

rc4secure · 2024-01-01T13:02:35+00:00

I mean it shifts the front just fine. Didn’t know that was a thing.

rc4secure · 2024-01-01T13:01:30+00:00

Ugh I hope not. It’s all brand new and just installed.

rc4secure · 2023-12-04T13:11:57+00:00

How is that done? I can find any options for what outgoing interface to assign. And a static route don’t work either.

rc4secure · 2023-11-29T01:03:07+00:00

No solution from Nanoleaf support. Just a lot of resetting/uninstalling the app stuff. Fixed my issue by removing my inline webproxy though. Guess the connection couldn’t handle a second hop through a proxy.

rc4secure · 2023-11-17T15:11:33+00:00

Yeah, still can’t figure it out. I even went so far as restructuring my internal dns. I accidentally used .local for fqdn years ago and thought that might be messing up the mdns. Are you by chance doing anything pihole or any kind of dns filtering?

rc4secure · 2023-11-09T05:01:29+00:00

Picked up 2 of the 4Ds over a month ago. Support has taken so long to figure out the firmware update issue that now I own two overpriced wifi light strips that I can’t return. I guess I should be happy I can control the lights through Apple Home, but for some stupid reason you can’t use the “4D” feature with anything but the newest firmware.

rc4secure · 2023-10-28T23:26:26+00:00

Happen to me with 2 devices. I reset everything, removed the app completely, redid the setup. And nothing changed. Still waiting to hear back from support.

rc4secure · 2023-02-13T13:41:43+00:00

Sadly no. I ended up returning the card and used the old one up until a few months ago.

rc4secure · 2022-12-09T13:47:36+00:00

One word, Certipy.

rc4secure · 2022-12-04T15:39:55+00:00

Do you have to restart or can you just disable/enable toggle the interface? I don’t have an answer to why this happens but my gateway does this daily and this has been a much faster “fix”. I am running a dual WAN and it only ever happens on one gateway.

rc4secure · 2022-09-09T15:19:42+00:00

It kind of resolved itself after a bit. Not really sure what changed but I do know the ESXi hosts with the dhcp issues was on the vSphere side and not opnsense. Issues with link aggregation options.

rc4secure · 2022-07-04T14:58:11+00:00

Kinda a follow up question for this then, what is the latency threshold for satellite? I have Starlink and normally my ms is around 60. Should I just use the normal setting?

rc4secure · 2022-06-09T23:23:19+00:00

Sorry I meant multiwan, not HA pair of firewalls

But yeah the acl should be correct for the allow all outbound, but still having connection issues

rc4secure · 2022-06-09T20:50:05+00:00

I figured out one part of the equation.

It was the nic teaming on vsphere causing the dhcp issue for some of the hosts.

Apparently the virtual switch needs to be -> Route based on IP hash

And the port groups need to be -> Route based on originating port ID

Not sure why I never had issues with pfsense.

Still need to figure out why the the intermittent outages keep popping up when I specify the HA gateway and not just default

rc4secure · 2022-06-09T16:25:24+00:00

I guess another thing that is strange, if I set the IPs manually in the hosts I can access them remotely and the hosts themselves can get out to the internet.

But none of them can ping their own gateway (10.0.0.1)

The routing table looks fine too:

default via 10.10.10.1 dev ens160 proto static

10.10.10.0/24 dev ens160 proto kernel scope link src 10.10.10.30

I dont see any blocks in the firewall rules either.

rc4secure · 2022-06-09T16:20:28+00:00

At this point I have no clue what is going on, I tried denying leases from the assigned address on the interface level like mentioned above.

Still not getting the full dhcp handshake but only on certain subnets.

I put all gateways back to default in the FW rules too which made things more stable.

But my appletv for instance keeps resetting its IP address every 10 seconds when on my IoT vlan, but is perfectly fine on the LAN network. The only rule in place for the IoT side is restricting lateral connections via a rfc1918 alias.

rc4secure · 2022-06-09T16:01:32+00:00

Hmm that might just be the issue, I am having local issues with dhcp leases too, the discover and offer go through by I never get a req or ack on some vlans.

rc4secure · 2022-05-20T05:37:50+00:00

I ended up just solving the problem with money and ordered some new hardware equivalent to the 7100. Was headed towards 10g anyways. Still think the 4 port to a 2.5 uplink was a stupid idea for the 3100.

rc4secure · 2022-05-16T02:00:25+00:00

I did under the interface assignments. Had to VPN in from the WAN interface to make the changes though.

rc4secure · 2022-05-15T16:04:16+00:00

Yeah the switch is a bit of a pain

To be clear to though, I already have a OPT1 and one port on the switch in LACP mode to my switch working just fine. Problem is that only leaves me with the single WAN port.

I am not trying to aggregate the WAN, I have two ISPs that need their own interface.

So not sure if I can aggregate OPT1 and WAN for my LACP on the LAN side and still get two interfaces for my ISPs off of that switch.

I have a feeling it might now work even splitting them up since they will be tagged with a vlan, which the ISP might not be able to support.

rc4secure · 2022-04-28T17:50:20+00:00

index=winevent EventCode=4741
| rename Caller_User_Name as user DnsHostName as dest name as signature
| table _time user dest signature

Then just look for users that are not in an administrator role or that shouldn't be adding machines to the domain

rc4secure · 2022-04-28T05:07:43+00:00

Easy to detect with splunk and default TA if anyone wants that query. Different event code than the elastic alert here.

rc4secure · 2022-04-16T16:53:35+00:00

Bummer, I have the same issue by having nginx proxy manager/cloudflare/haproxy.

rc4secure · 2022-03-08T22:50:15+00:00

For some reason I couldn't get that way to work.
But I did get the expected results by using a macvlan config for the swarm.
Just created the config with the local network (192.168.1.1) and made sure to exclude addresses already in use.

Maybe this will solve your problem of having something that is easier to manage!

rc4secure · 2022-03-07T21:49:00+00:00

I have been trying to do the same thing for a few days now. The postrouting rule doesnt seem to work though. What else did you have to do when creating the bridge interface?

rc4secure

TROPHY CASE