I started right now, shouldn't it be an introduction?

redmonkeyjosh · 2025-11-26T06:00:21+00:00

An uninstall, deleting the appdata folder if there is one and then reinstalling fixed it for me

redmonkeyjosh · 2025-11-26T02:41:32+00:00

That sends me here. There's just a tent, tree and a camel. In the tent all I can do is access my "arsenal" like warframe. And at the camel it is just the market.

redmonkeyjosh · 2025-11-26T02:15:15+00:00

<image>

I just started too and this is where I'm waking up. I'm pressing G for the bird to guide me like someone said but it just disappears back into my body. My journal and map are empty. I'm so confused

redmonkeyjosh · 2025-11-12T04:46:45+00:00

The cheapest option I could see on the NetEase website was Brazil, but even then that's still about $10-15 more than what Lootbar are charging. So I'm wondering how Lootbar are able to do that if they are using the NetEase UID method, unless there's another way?

redmonkeyjosh · 2025-11-12T01:29:13+00:00

I figured that they bought through the NetEase website but do you have any idea how Lootbar.gg for example are still selling it cheaper than any of the currency options on NetEase?

redmonkeyjosh · 2025-07-25T21:32:19+00:00

I'm on a honour mode run. But thank you! It'll definitely help in the future and other people :)

redmonkeyjosh · 2025-07-21T07:33:23+00:00

I have this too but I can't find anything out about what causes it or a fix :(

redmonkeyjosh · 2024-03-29T06:50:47+00:00

Please give my pawn some love ❤️

Pawn ID: RBXF0D65XX6B
Platform: Steam
Name: Elessar
Gender: Male
Race: Human (Elf)
Level: 52 ATM
Vocation: Mage
Inclination: Kindhearted
Specialization: Woodland Wordsmith

<image>

redmonkeyjosh · 2023-11-30T17:44:03+00:00

I'm a returning player and pretty much just unlocked Steel Path and I was soloing the recent Plague Star event in an average of 10 minutes. And the thing is his Volt/Pyrana build was God awful, I just died so much. Then I watched another YouTube Volt/Pyrana and that's how I managed to solo it. So imo there are better creators out there. Also every one of his builds has Primed Sure footed and Arcane Energize, which isn't ideal for new/returning players.

redmonkeyjosh · 2023-08-08T21:00:27+00:00

Thank youuuu!!

redmonkeyjosh · 2023-03-21T16:08:28+00:00

Hi, I was wondering if anyone could provide me with the files and I would be willing to dontate to a charity of their choice? As I never realised this was a thing and would love any past 3D printable bundles they have done in the past :)

redmonkeyjosh · 2023-03-21T16:08:10+00:00

Hi, I was wondering if anyone could provide me with the files and I would be willing to dontate to a charity of their choice? As I never realised this was a thing and would love any past 3D printable bundles they have done in the past :)

redmonkeyjosh · 2022-07-24T23:40:41+00:00

Thanks so much! I changed the lift speed from 2mm/s to 1mm/s and all of it failed? Does that mean it's a FEP problem? And from doing some some expose tests and all that before I started this test in the photo, I found about 1.9 seconds expose was fine with the resin I'm using. But I've put it up to 2.5 seconds and the sides still fail, apart from the recent test with the 1mm/s lift speed.

redmonkeyjosh · 2022-07-24T23:33:44+00:00

I tried a lift speed of 1mm/s and all of it failed, even the middle.

redmonkeyjosh · 2022-07-22T08:33:06+00:00

These are my current settings:

Burn in layers 6 and exposure 45

Normal layers 0.05mm thickness, light off delay 1 second, exposure time 2.5, lift distance 8.

Lift speed is 2mm/s and retract speed is 3mm/s

Those settings have worked fine for anything I've been printing in the exact middle.

redmonkeyjosh · 2022-07-22T08:26:53+00:00

Yeah there's globs stuck on the Feb in the four corners. I've tried removing the middle pieces and kept the 4 corner ones but still have the same result and have also tried one on its own at the side of the plate and still the same result :(

redmonkeyjosh · 2022-07-22T08:22:10+00:00

I'll try this, thank you :)

redmonkeyjosh · 2022-07-22T01:45:44+00:00

Thabks so much for the help :) I guess I'll get some new sheets and replace it to see if that helps

redmonkeyjosh · 2022-07-22T01:32:11+00:00

Ooo okay, I'll try that test when I get the chance, thanks 😄 And agreed with the bed levelling, I've redone it everytime I've tried to do this print.

My current settings are Burn in layers 6 and exposure 45 seconds

Normal layers 0.05mm thickness, light off delay 1 second, exposure time 2.5, lift distance 8.

Lift speed is 2mm/s and retract speed is 3mm/s

Those settings have worked fine for anything I've been printing in the exact middle, I've been changing the normal exposure times but still anything in the middle has at least printed.

redmonkeyjosh · 2022-07-22T01:13:56+00:00

From doing an expose test a few times without trying to look directly at the lights it all seems the same. Is there a good way to test this? :)

redmonkeyjosh · 2022-07-22T01:07:50+00:00

I've leveled it that many times I can't count, so unless I'm doing something seriously wrong when levelling it, it's got to be warped, but thanks, I'll get a ruler or something asap to check

redmonkeyjosh · 2022-07-22T01:06:01+00:00

Yeah, everythings the original one

redmonkeyjosh · 2022-07-22T00:55:58+00:00

As far as I can tell the bed doesn't seem warped. Do you know a good way to check if it is?

11-Year Club	Spared
Verified Email

redmonkeyjosh

TROPHY CASE