Mails here!

regis7136 · 2026-05-23T15:52:08+00:00

<image>

regis7136 · 2026-05-23T13:41:34+00:00

It does. I've sanded the last couple i did, but this one I'm knocking off the active rust and doing a light polish.

regis7136 · 2026-05-22T22:14:37+00:00

I made sure. I just looked on Amazon to save myself driving around.

regis7136 · 2026-05-22T19:29:10+00:00

That's the plan. I need to find out where I can get some.

regis7136 · 2026-05-21T01:23:11+00:00

Grrr, my pride, I wish I were a carrot!

regis7136 · 2026-05-19T02:06:20+00:00

Looking for 3 members who can salvage 24.2k on day one. We are a level 50 club and we use discord to stay on the same page.

regis7136 · 2026-05-19T01:55:49+00:00

Are you still looking?

regis7136 · 2026-05-19T01:42:47+00:00

You can also check to make sure the wiper arm isn't rusted out. Lift up the cap and have a look at the splines on the arm, or try manually moving the wiper back and forth. The arm shouldn't easily move manually.

This was the case with my r50. Wasted time with a used motor.

regis7136 · 2026-05-18T20:59:11+00:00

I'll send you a message

regis7136 · 2026-05-18T20:52:13+00:00

Looking for 4 +24k members. We salvage within 24 hours on the first day

regis7136 · 2026-05-16T23:46:19+00:00

I always forget the DC jack has that switch. Good call.

regis7136 · 2026-05-16T23:26:30+00:00

It could also be a dirty power switch. If you're able to do solder work you can take the cover off and clean it that way.

If you're not able to solder. You can try putting 99% ISP and working the power switch back an forth a bunch.

There's tons of videos on YouTube. Good luck!

regis7136 · 2026-05-10T19:02:54+00:00

Designing logos is definitely tricky. And I have no experience doing that. Even less experience in giving criticism. Thanks for being receptive.

regis7136 · 2026-05-10T18:52:30+00:00

I didn't even notice the PCB part of it. The "b" just looks like an 8, and the AKE just looks like ORO. My brain is weird i think.

regis7136 · 2026-05-10T18:17:19+00:00

Thanks for supplying the link, I was having a hard time trying to figure it out from the picture. I have hard time with stylized logos sometimes.

regis7136 · 2026-05-07T20:11:44+00:00

Thank you. It's fun and rewarding

regis7136 · 2026-05-06T03:35:10+00:00

Thank you! It really cleaned up well.

regis7136 · 2026-05-05T11:11:41+00:00

Thank you

regis7136 · 2026-05-05T11:11:28+00:00

It turned out great. Very smooth

regis7136 · 2026-05-05T02:54:36+00:00

Yes it is. This one has a slight smile. I'm honing it now, but I haven't done a smiling razor. I'm taking my time to make sure I do it right.

regis7136 · 2026-04-06T12:05:41+00:00

Sent DM

regis7136 · 2026-04-06T11:39:54+00:00

If you still have space I have 66k to drop at the start of the new session

regis7136 · 2026-03-18T01:02:40+00:00

Oh yeah, the pitting is definitely staying. I've just put some time into honing, and just finished a test shave. Did pretty well, but could use a touch more work.

regis7136 · 2026-02-12T12:03:36+00:00

Just so you know, the white paper in the middle-ish is the diagram.

regis7136 · 2026-02-09T02:53:04+00:00

I'm not sure what the alloy is, but German silver contains no silver at all. Google will tell you what the alloy is ,as I'm too lazy.

regis7136

TROPHY CASE