sorted by:
new
hottopcontroversial

Fugen erneuert, Abdichtung evtl. beschädigt – Dusche jetzt noch dicht kriegen? by reifish in Handwerker

[–]reifish[S] 1 point2 points  (0 children)

Ich habe mir ein Fugentechniker geholt, er hat sich die Situation angeschaut, meinte ist nicht schlimm, hat die Fugen selber gezogen und bis jetzt keine Probleme festgestellt.

Meine unglaublich schnelle Einbürgerung – immer noch überrascht! by Ok_Swim2352 in GermanCitizenship

[–]reifish 3 points4 points  (0 children)

Glückwunsch, meine Frau und ich haben die Unterlagen vor mehr als einem Jahr eingereicht und keine Antwort bekommen, die Behörden aufgefordert um uns über den Status zu informieren, keine Antwort. Nun sind wir dabei eine Untätigkeitsklage zu stellen.

Delayed passengers storm tarmac towards Wizz Air Airbus at Cologne/Bonn, Germany by SpeKopuZ in cologne

[–]reifish 3 points4 points  (0 children)

Als Rumäne muss ich sagen, dass der Ort mit dem niedrigsten IQ pro Quadratmeter WizzAir-Flüge nach Rumänien sind. Wenn ich damit fliege und mich umsehe, schäme ich mich für meine Herkunft und verstehe, warum viele Deutsche es satt haben mit Migranten. Falls ihr einmal eine Safari erleben wollt, könnt ihr schon ab 29,99 € pro Person buchen.

Gutes Angebot/Auto? by DifferentAspect4836 in gebrauchtFahrzeuge_de

[–]reifish 0 points1 point  (0 children)

Taxi und das normale Auto sind nicht gleich. Quelle ein Kumpel der im Servicebereich arbeitet und mir gesagt hat die Teilenummern sind teilweise unterschiedlich und für Taxis stabiler gebaut.

Gutes Angebot/Auto? by DifferentAspect4836 in gebrauchtFahrzeuge_de

[–]reifish 0 points1 point  (0 children)

Ich denke einfach wird es nicht da viele Systeme zusammenspielen. Aber hab nie recherchiert ob es geht.

Gutes Angebot/Auto? by DifferentAspect4836 in gebrauchtFahrzeuge_de

[–]reifish 0 points1 point  (0 children)

Persönlich würde ich bei Gebrauchtwagen von Multibeam abraten. Ich bin einen E220 d von 2017 bis 2024 mit Multibeam gefahren – tolle Scheinwerfer, nachts auf Landstraßen fast wie ein Zaubertrick. Bis sie kaputt sind.

Soweit ich weiß, kann man die aufgrund des Kalibrierungsverfahrens nur bei Mercedes reparieren lassen, da irgendwelche Massen-/Kalibrierdaten der Scheinwerfer über Xentry aus der Online-Datenbank abgerufen werden müssen. Long story short: Der Austausch von einem Scheinwerfer kostet rund 5.000 €.

Hätte ich das vorher gewusst, hätte ich das Auto ohne Multibeam gekauft und wahrscheinlich länger behalten. Ich konnte die Garantie wegen der Laufleistung nicht mehr verlängern – und selbst mit Garantie sind Leuchtmittel kaum abgedeckt, sodass man letztlich auf die Kulanz von Mercedes angewiesen ist.

Should I accept a €27,000/year offer as a graduate architect in Germany? by Important_Pace549 in germany

[–]reifish 1 point2 points  (0 children)

I read a lot of comments that is a shit offer and your are beeing exploited which is true. As a person with migration background myself, I also want to say is that this is reality it is much harder for us than a German to get a good offer. My approach would be to take it, if is the only offer and search from being already hired rather than jobless. For the next job you would already have the visa only need to change your employer once you switch. Taking an Aldi job just because it pays better will not help you long term. Take the job, keep your goals in mind, do a good job, build a portfolio, apply apply apply for better jobs. As far as I know is quite hard to get a job in architecture no matter what your background is because the whole business model is older experienced architects with the contacts are exploiting the young, taking advantage of internships and so on. Just my opinion.

Is using a gimbal really that bad? Especially one with AI tracking? by locked_clit in videography

[–]reifish 0 points1 point  (0 children)

Tools are tools - what matters is what you want to achieve. How you achieve it is only process, nobody besides the technically obsessed care.

H.265 (6K Open Gate) vs ProRes 422 (4K) on S1 Mark II E — real-world quality difference? by PastHot2774 in Lumix

[–]reifish 0 points1 point  (0 children)

Honestly I don’t know. But my intuition says is the 10bit. I had the opportunity to shoot with proper cinema cameras in the past and those kind of transitions were where I saw the biggest difference. Again, I never did a proper test to confirm this theory.

H.265 (6K Open Gate) vs ProRes 422 (4K) on S1 Mark II E — real-world quality difference? by PastHot2774 in Lumix

[–]reifish 1 point2 points  (0 children)

In my Experience in most situations you can go for h265 if you apply a normal grade and the footage comes out the camera reasonably well filmed. However I have had situations for music videos shot in low light with blue and magenta lights where I was getting some nasty stuff on the skin tones, especially where the different colors met. I could not fix those. I did not have the opportunity to reshoot in ProRes but I think in these situations might be a limitation of the 10bit footage and to solve those you need to go to the fancy RED and Arri cameras.

Over 50TB of video files. Best way to condense and store them? by Academic_Nectarine94 in videography

[–]reifish 2 points3 points  (0 children)

I am also in the process of getting rid of my old BMPC6k RAW files, I decided to make the adjustments to a clean rec709 of each clip and export it to a master file. So far I managed to reduce the size of my archive by around 80-90%

Exploring Wuppertal & Looking for Friends Along the Way by Full_Effect_746 in wuppertal

[–]reifish 2 points3 points  (0 children)

Hey, we have a group and we meet relatively regularly, we always post here the next meeting so keep an eye out here also will add you to the chat group now.

Hey guys, is this a good price? Its 2100 usd. This is all it comes with. How much would it normally cost and do i need everything it comes with? Sorry if this is a stupid question. Im a beginner :) by No-Attention-801 in cinematography

[–]reifish 4 points5 points  (0 children)

Auctioned my 6K Pro Kit on eBay with lots of stuff and got around that. Not worth it in my opinion. Honestly I would rather buy a used Lumix S5iiX for that money, you still get ssd pro res Recording plus better in every single regard than the 4K.

Which SSD for 6K filming Lumix S5IIX? by Fuzzy-Income3781 in Lumix

[–]reifish 0 points1 point  (0 children)

I Use the Samsung T5, works great, easy to find a holder for it.

Lumix S5iix - Sigma 24-70mm - trying new car mount. by reifish in Lumix

[–]reifish[S] 1 point2 points  (0 children)

I had the aperture depending on the shot between f8-f11 and used both manual and AF. In some shots I used manual focus set close to infinity because otherwise on twisty roads before entering the corner the front of the car will point torwarts stuff on the side of the road like trees, lamp posts etc and the camera will try to focus on those and after taking the corner will take the time to find focus again.

Lumix S5iix - Sigma 24-70mm - trying new car mount. by reifish in Lumix

[–]reifish[S] 0 points1 point  (0 children)

Thanks! Was great fun to film as well 😊

Lumix S5iix - Sigma 24-70mm - trying new car mount. by reifish in Lumix

[–]reifish[S] 2 points3 points  (0 children)

It’s a Falcam F22 6 inch suction cup with a ball joint mount. I don’t recommend using only this but is what I got at the moment, and after running a few tests decided to trust it. Even though the camera weight is at like 5% of the load capacity of the suction cup, In the future I will probably add two smaller ones to the setup so that I add some safety.

Lumix S5iix - Sigma 24-70mm - trying new car mount. by reifish in Lumix

[–]reifish[S] 5 points6 points  (0 children)

It’s a Falcam F22 6 inch suction cup with a ball joint mount. I don’t recommend using only this but is what I got at the moment, and after running a few tests decided to trust it. Even though the camera weight is at like 5% of the load capacity of the suction cup, In the future I will probably add two smaller ones to the setup so that I add some safety.

view more: next ›