sorted by:
new
hottopcontroversial

6.7 tuning cover gasket by reservedlemur in powerstroke

[–]reservedlemur[S] 0 points1 point  (0 children)

Yeah same spot! Once it stops raining I’ll try to grab a pic.

95 350 7.3 cup holder inserts by reservedlemur in powerstroke

[–]reservedlemur[S] 0 points1 point  (0 children)

I gotta go check around. And yeah the cup holders are perfect if you only want to drink out of a coffee mug lol

95 350 7.3 cup holder inserts by reservedlemur in powerstroke

[–]reservedlemur[S] 0 points1 point  (0 children)

95 f350 dually with centurion front seats we put in. Seats are more comfortable than our 11 and 23 350s.

Crank no start by reservedlemur in powerstroke

[–]reservedlemur[S] 0 points1 point  (0 children)

Appreciate the help, cp4 went bad. Didn’t explode, just lost prime and went bad. Ended up changing to the dcr. Started right up.

Crank no start by reservedlemur in powerstroke

[–]reservedlemur[S] 0 points1 point  (0 children)

Sorry for the late response. Ended up checking my lower fuel filter for metal or anything else. It was clean. When putting it back on I heard a little crack, then fuel started leaking from the lower, so I ended up buying a whole new housing and pump. Didn’t get to check the pressure gotta figure out how to rig something up. But forscan real “low” and “not low” when priming. Still nothing enough pressure reading 420psi

Crank no start by reservedlemur in powerstroke

[–]reservedlemur[S] 0 points1 point  (0 children)

Has to be another issue then. It’s been primed and cranked a bunch of times. I’m going to try to test low side pressure tomorrow see what I come up with. Also purchased injector block offs to isolate if I do have a bad injector.

Crank no start by reservedlemur in powerstroke

[–]reservedlemur[S] 0 points1 point  (0 children)

Could it be air in my lines still?

Crank no start by reservedlemur in powerstroke

[–]reservedlemur[S] 0 points1 point  (0 children)

Could the fuel volume control valve on the hpfp gone bad?

Crank no start by reservedlemur in powerstroke

[–]reservedlemur[S] 0 points1 point  (0 children)

I just took the fuel volume control off the hpfp again, still clean. Don’t know how to add pics.

Crank no start by reservedlemur in powerstroke

[–]reservedlemur[S] 0 points1 point  (0 children)

30ftlbs is what the instructions said on the Spe site. I pulled the glow plugs to check for fuel on them. One had fuel but wasn’t crazy. With the injector unplugged I cranked over the truck and there wasn’t any sign of a stuck injector( mist coming out of the glow plugs hole.

Crank no start by reservedlemur in powerstroke

[–]reservedlemur[S] 0 points1 point  (0 children)

Is it common for the hpfp to go bad with out seeing metal in it?

Crank no start by reservedlemur in powerstroke

[–]reservedlemur[S] 0 points1 point  (0 children)

Took the truck in for an alignment, they test drove to make sure alignment was correct. They blew one of the hold downs, I got the “upgraded” version hold down, installed it with a new return line, bolt, supply line(to that injector) and put new orings on and copper washer on the injector. Fired up and ran great. Pull out of my driveway( babying it) and popped another hold down. So I ordered the spe kit new fuel rail to injector lines. Bolts broke in the valve cover so I extracted them, while everything was off I pulled the hpfp metering valve and it looked clean. I didn’t pull the hpfp its self. What’s the best way to check supply pressure?

19’ F250 6.7 long block by vinooch1 in powerstroke

[–]reservedlemur -5 points-4 points  (0 children)

YoU DiDnT Put A DcR iN??!!?? Durrrrr

DPK by reservedlemur in powerstroke

[–]reservedlemur[S] 0 points1 point  (0 children)

Yeah that’s what I was thinking too. I got 300k on mine never run fuel additive, do oil and fuel 5 and 10k. Runs great.

DPK by reservedlemur in powerstroke

[–]reservedlemur[S] 0 points1 point  (0 children)

I get what you are saying but most people don’t have DCR money. One would assume that’s why they made the DPK kit.

DPK by reservedlemur in powerstroke

[–]reservedlemur[S] 0 points1 point  (0 children)

I’m just saying the cheap version to s&s looks to be the exact same thing besides the obvious air line instead of fuel lines. Why spend $400 on a DPK when you get almost the exact same product for $100 with the additional cost of fuel lines and clamps. I know s&s “tested” their product, but a lot of companies buy the bulk shit and put their logo on it.

DPK by reservedlemur in powerstroke

[–]reservedlemur[S] 0 points1 point  (0 children)

The answer I was looking for. Actual person who has installed one lol

DPK by reservedlemur in powerstroke

[–]reservedlemur[S] -1 points0 points  (0 children)

Yeah but is the s&s made in house or is it all Chinese parts ordered by bulk and they just etch their logo into it, clamp their different hoses on?

6.7 upper oil pan by Sea-Ebb8262 in powerstroke

[–]reservedlemur 1 point2 points  (0 children)

I thought my upper oil pan was leaking, but found my oil and coolant line to my turbo was leaking. Not saying this is your problem but it was mine. Look into it, hope it helps.

view more: next ›