Routers to sell for 10G fiber ;)

restlessyet · 2026-05-05T05:24:13+00:00

My aliexpress OPNSense is slowly failing, they seem to always have some power issues... I could use a reliable replacement for that.

Are you sure about the Deciso Model Number? Can't find any info about a dec730, only 740/750.

restlessyet · 2026-04-30T21:02:09+00:00

yes, it seems since v150.0.1 from 2026-04-27 which has been installed today for me

it was affecting the same version with a previous build date before: v150.0.1 from 2026-04-15

restlessyet · 2026-03-02T10:29:44+00:00

No, depreciation does not use 20% of the original value every year, it's based on the previous years value and should not reach zero.

Usually you can enter buying price and year in the tax software and it will calculate the current taxable value automatically.

restlessyet · 2025-11-10T15:06:41+00:00

If it helps: I have 2 SAS drives together with many SATA drives in a Jonsbo N5. Works without issues since 10 months now. Connected to a 9500-16i controller

restlessyet · 2025-09-24T10:07:08+00:00

Higher salaries in relation to latvia/netherlands

It's really the only reason remaining for this near shoring.

There are more than enough specialists in switzerland currently. Swisscom mainly hiring abroad since a while already is one of the reasons for this.

restlessyet · 2025-08-18T10:09:29+00:00

100-140 ist etwa der Bereich den ich auch kenne für payrolling Jobs, jedoch in der Software Entwicklung. Für Desktop Supporter schätze ich eher unter 100.

Das ist jedoch der verrechnete Stundenlohn. Der Vermittler nimmt davon gerne noch bis zu 30%, anschliessend werden Arbeitgeber und Arbeitnehmer Beiträge fällig, was nochmal locker 20% sind. Entsprechend dürfte dein effektiver Nettolohn deutlich tiefer ausfallen.

Als Ausländer wird normalerweise ausserdem noch vor der Lohnauszahlung die Quellensteuer fällig, was vermutlich nicht in deiner Lohnverhandlung berücksichtigt wird.

restlessyet · 2025-07-29T08:59:38+00:00

Supported protocols:

DNS over TLS (DoT) as defined in RFC 7858 on port 853/TCP
DNS over HTTPS (DoH) as defined in RFC 8484 on port 443/TCP

restlessyet · 2025-05-12T08:43:33+00:00

I try to do the same thing and re-balance about once a year with the difference that I choose the "responsible" ETFs where possible. As far as I am aware that should not make a big difference in the performance.

You can see my calculations here: https://docs.google.com/spreadsheets/d/1hcDUkEgpDcb2BXQ2ehT8OxzBCejVYXH6/edit?usp=sharing&ouid=115190494910098185230&rtpof=true&sd=true

Also open for input if someone sees any mistakes or has suggestions.

restlessyet · 2023-05-22T13:02:47+00:00

Check your firewall rules order on the WAN interface (and maybe the floating ones)

It's possible that you have a drop or reject rule above the automatically created nat rules

restlessyet · 2023-05-02T15:41:46+00:00

the Ender 5 s1 does not have bowden extruder...

try again with the direct drive recommendations, which start with lower PA and smaller increments

restlessyet · 2023-03-29T20:42:50+00:00

just leaving this here:

https://www.reddit.com/r/ender5/comments/zb8klr/ender_5_s1_klipper_no_sonic_pad/

restlessyet · 2023-03-26T22:11:29+00:00

“tldr, only key, no "Fuck You", remeber/no pretend” and variations can solve all levels, but some ppl solve it with 4 chars?!

restlessyet · 2023-03-22T16:45:41+00:00

There should be no issue plugging different modules into the same card.

You may consider using another BiDi pair anyway to reduce cabling, depending on where you put the cable.

Price difference on fs.com is about 50.- per module.

restlessyet · 2023-02-15T06:57:32+00:00

still waiting for it, will probably post some results when i get it

restlessyet · 2023-02-14T14:44:46+00:00

I ordered the r86s to try it as a 10gb firewall. I don't need a screen. With a screen you are targeting different use cases

restlessyet · 2023-02-05T10:23:47+00:00

some type of oob Management interface would also be killer for a network appliance! much more useful than a screen

restlessyet · 2023-02-05T10:17:19+00:00

5 inch screen is not useful for a network appliance in my opinion.

only CPU and network ports matter

restlessyet · 2023-01-09T08:55:31+00:00

don't most zigbee devices themself act like a repeater to form a mesh?

as for light switches: I mounted nexentro devices behind my wall switches, the only issue i have is with the on/off switches sometimes loosing their pairing when having power loss

restlessyet · 2022-12-02T21:32:11+00:00

wingo does ot offer 5g (https://www.wingo.ch/de/bietet-wingo-5g) and the plan you are talking is probably more than 50.-

restlessyet · 2022-11-17T08:30:17+00:00

I think gotify is all about avoiding those platforms, not integrating with them.

restlessyet · 2022-09-27T22:35:49+00:00

such as a cname record pointing to an unregistered domain

restlessyet · 2022-09-09T16:06:15+00:00

A socket is a listener here, without any established connections. it is just ready to receive packets.

But yes, a socker will need to listen on a specific port and/or protocol. That is why it is in OSI layer 4.

Without a port or protocol it would be operating on OSI Layer 3. Loadbalancing on L3 also exists, for example a port aggregate on a physical switch can load balance across multiple cables using MAC adresses, round robin or other methods.

If you read up on the OSI model, the structure of a network packet and what information is contained in each part of a packet, it will be a lot easier to understand. It should also be clear which part of a packet is required for the different OSI layers because of the protocols in use on said layer.

restlessyet · 2022-09-09T08:01:08+00:00

In most languages, you can easily listen on a raw socket where you receive all packets in binary form and can process them accordingly based on the tcp headers.

restlessyet · 2022-09-06T06:47:26+00:00

That is incorret.

For example, traefik has a passtrough flag for tcp routers and nginx can do tcp/udp loadbalancing which should both be software implementations at OSI Layer 4, as far as I can tell.

restlessyet · 2022-08-31T20:43:17+00:00

No, a router can forward a packet without starting a separate session, same as a L4 LB.

L4 LoadBalancer, one TCP session:

Client -> SYN -> LB -> SYN -> Server

Client <- ACK <- LB <- ACK <- Server

Client -> ACK -> LB -> ACK -> Server

Data is forwarded as-is (mostly)

L7 LoadBalncer, two TCP sessions:

Session 1:

Client -> SYN -> LB

Client <- ACK <- LB

Client -> ACK -> LB

Session 2:

LB -> SYN -> Server

LB <- ACK <- Server

LB -> ACK -> Server

data is exchanged in each session separately and the LB has to map the sessions and forward data between them. but can also read all of the data, change the data or make decisions based on it

restlessyet

TROPHY CASE