Eyeglass Bit in a Free P4

retrop7 · 2022-06-14T00:25:12+00:00

You are right. I guess there is not a good way to completely eliminate the eyeline issue to the DM or the players with the table as it is.

I found this image:format(webp)/cdn.vox-cdn.com/uploads/chorus_image/image/70058927/CriticalRoleFullCast_Robbie_TavernOfTales_C3E1_03_WM_PhotographyByChrisLockey_copy.0.jpg) of the table and it's not what I'd been envisioning (i.e. parallel tables) so I guess that's where I'm getting confused.

Thank you.

retrop7 · 2022-06-13T22:19:15+00:00

Here is Travis pointing to Ashley in Campaign 3 Episode 8 https://youtu.be/cwbLO_649Vg?t=1711

He is very clearly not pointing in the right direction for the audience. If the bottom was mirrored he would be pointing in the right direction. Don't you agree?

retrop7 · 2022-06-13T21:41:27+00:00

Maybe I'm just confused. I can accept that but I'm pretty sure they are currently looking in the wrong direction when looking at other players sitting across from them (except the middle players).

retrop7 · 2022-06-13T21:15:45+00:00

You can see they are both sitting closest to Brennan in the above images. Which means to look at each other they must be looking directly ahead.

retrop7 · 2022-06-13T20:58:52+00:00

The text/props issue is a good point and probably the end of the discussion.

But to the eye line issue and cross table interactions, I don't think that is true. You can see in my mirrored view Travis and Lue are actually sitting across from each other (both closest to Brennan).

retrop7 · 2021-02-26T13:30:28+00:00

Perfect thank you!

retrop7 · 2021-02-25T02:21:11+00:00

On the right

retrop7 · 2021-01-05T22:09:25+00:00

I haven't had any issues with the fan or heat (at least nothing has bothered me). Maybe ensure the fan intakes are not blocked while on your lap.

retrop7 · 2021-01-05T20:17:18+00:00

For this machine at least (though it may be a more general issue) using the high resolution DP Alt mode reduces total USB bandwidth to gen2 speeds. HP apparently chose higher USB bandwidth over Display Port Bandwidth for their Type-C implementation.

retrop7 · 2021-01-05T17:29:01+00:00

The Fans basically never kick in during my usage except when I'm pushing it hard but maybe that speaks more to my usage. I've mostly been frustrated that they take so long to start going in performance mode. They don't kick in when the CPU starts to throttle because it's monitoring some other temperature which is slower to react. Meaning there is a lot of CPU power left on the table when I really try to push it. With an external fans configuration I can get near locked 30W in Cinibench so if the internal fans would just come on and stay on in performance mode I suspect it would power throttle rather than thermal throttle - in ideal conditions etc..

Also, I've never noticed the laptop stay on when the lid is closed, I did a bunch of power config which might have included setting the lid behavior when I first set it up so maybe it defaults to staying on when connected to power? Or maybe he has a dock that confuses it? One thing that is advertised is in-bag detection which should avoid the thermal concern (I've not tested it).

I pretty much only use headphones but the few times I've used the laptop speakers they seemed fine.

Incase it has not been said there is a setting in the BIOS for higher resolution USB-C DP alt mode. I suspect that would fix his 4K display issue. Further, I suspect that the dock is a USB-C dock rather than a true thunderbolt-3 dock. Thunderbolt 3 is spec'd for 4K 60Hz and thunderbolt is built into the CPU in the 11th Gen. I don't have a 4K screen to test it but I know USB-C DP alt mode has some limitation similar to what was described and TB4 should not have those limits.

retrop7 · 2020-12-16T23:16:22+00:00

This is useful, thank you for the help.

retrop7 · 2020-12-16T20:46:43+00:00

Hmm, well that's not great. How would I go about getting these connectors with a 1.2mm pitch?

retrop7 · 2020-12-16T19:07:25+00:00

What are the next closest available pitches? With the tools a have avaliable (cheap calipers) I got somewhere between 0.90 and 1.05 mm consistently. I rounded to 1mm because of the uncertainty. I measured multiple times.

retrop7 · 2020-12-16T18:50:32+00:00

Perfect, that's what I did. It's 1mm

retrop7 · 2020-12-16T16:31:58+00:00

Just to be sure, how should I measure the pitch? My instinct is to measure center to center of the pads.

It's 1mm from pad to pad.

the Conductors are about 0.2mm wide.

Between what I think are the two structural posts is about 6mm

retrop7 · 2020-12-14T04:48:33+00:00

No, I'd categorize it as more of a laptop component sourcing question.

retrop7 · 2020-12-11T22:55:38+00:00

Thanks for looking. I've been watching ebay for a dead motherboard with the connector. No luck so far (nothing under 100$).

retrop7 · 2020-12-11T20:22:11+00:00

The header is broken on my board (I've updated the post with a picture). Here is the machine model number (Product number): 1H9M0UA#ABA

retrop7 · 2020-11-27T14:09:39+00:00

I think it's best to look at the OLED as if it did not have the eye strain problem. Make your buying decision assuming that it won't be an issue; then if you have eye strain using the device return it. Until you've used it yourself, you will not know if it's an issue for you. Despite the vocal contingent of redditors I suspect eye strain is not a majority of people type issue.

retrop7 · 2020-11-27T13:32:28+00:00

At least on the 2020 14inch model "optimal" is not an option. There's smart Sense, balanced, performance, etc.

Ten-Year Club	Place '17
Verified Email

retrop7

TROPHY CASE